Topdon TCView TC001 Manuel utilisateur
TCView
Thermal Imaging Camera | User Manual
English
Caution
Section 1
What's in the Box?
005 | EN
Read all instructions before using.
Do not point the infrared camera at the sun or other strong energy sources for
long periods of time. This may cause damage to the detector in the camera.
Do not touch the lens with your hands. Do not knock, pry, puncture, or scratch
the lens.
Do not disassemble the unit.
TC001 Thermal
Imaging Camera
Quick User Guide
Multifunctional
Adapter Cable
Carrying Bag
Cleaning Cloth
Please keep the unit away from water to avoid leakage or short circuit.
Section 2
Type-C
Connector
Thermal Camera Indicator
Product Overview
Once the TC001 camera is connected to an external device, the LED
indicator will light up and remain solid blue.
006 | EN
Section 3
Figure 3.1.1 Figure 3.1.2
Using TC001 with Mobile Device
Preparation
Download and install the TC001 app
Connect the TC001 camera to an Android phone.
1.
2.
Go to the Google Play and search TC001.
Plug the TC001 into your phone directly(see gure 3.1.1).
Alternatively, you can go to www.topdon.com/products/tc001, and enter
the download page to install the TC001 app.
Or you can use the supplied adapter cable as an extension cable to
connect the TC001 to your phone (see gure 3.1.2).
007 | EN
Open the TC001 app. The icon at the top right of the home screen
displays "Connected" (see gure 3.1.3).
3.
At the bottom of the bar, tap to enter the photo/video
recording screen.
1.
Tap the camera button in the center of the bottom of the screen to take
and save a snapshot.
2.
Make sure the camera and storage permissions are enabled for the
TC001 app before using.
Taking Photo/Video
Thermal Imaging
Figure 3.1.3
008 | EN
Tap the record button in the lower right of the screen to switch to video
mode. Tap again to start and stop recording.
3.
To view the saved images/videos, tap on the thumbnail in the lower left
corner (see gure 3.2.1).
4.
Figure 3.2.1
At the bottom bar, tap to display measurement tool selections.
Select to add a point of reference.
Select to add a line (for hot spot and cold spot detection).
009 | EN
Adding/Removing Measurement Tools
010 | EN
Changing Color Palette
This function allows users to change the pseudo-color display of the
infrared image.
Follow the steps below to change the color palette:
Select to add a plane (for hot spot and cold spot detection).
Select add a center spot, hot spot and cold spot detection over the
entire image area.
Select to remove all measurement tools.
Figure 3.2.2
Image Setting
011 | EN
Tap to enter the image setting menu.
Tap to rotate the image.
Tap at the bottom bar.
Swipe right or left to select the desired palette.
1.
2.
Figure 3.2.3
Tap to adjust the image contrast.
Tap to open the camera of your phone and enable Image in
Image mode.
Tap to adjust the image sharpness.
Figure 3.2.4
012 | EN
Autres manuels pour TCView TC001
1
Table des matières
