e)Do not overreach.Keepproperfooting and balance at all times.
This enablesbetter control of the powertool in unexpectedsituations.
f)Dress properly.Do not wear loose clothing or jewellery.Keep your hair,clothing and glovesaway from
moving parts.Loose clothes,jewelleryor long hair can be caught in moving parts.
g)If devices are provided for the connection of dust extraction and collection facilities,ensure these
are connectedand properlyused.Use of these devices can reduce dust related hazards.
h)The appliance is not intended for use by persons(including children) with reduced physical,sensory
or mental capabilities,or lack of experience and knowledge,unlessthey have been given supervision or
instruction concerninguse of the appliance by a personresponsiblefor their safety.
i)Children should be supervisedto ensure that they do not play with the appliance.
4)Power tool use and care
a)Do not force the powertool.Use the correct powertool for your application.The correct powertool
will do the job better and safer at the rate for which it was designed.
b)Do not use the power tool if the switch does not turn it on and o.Any power tool that cannot be
controlled with the switch is dangerousand must be repaired.
c)Disconect the plug from the power source and/or the battery pack from the power tool before
making any adjustments,changing accessories,orstoring powertools.Such preventive safety measures
reduce the risk of starting the powertool accidentally.
d)Store idle power tools out of reach of children and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.Power tools are dangerous in the hands of
untrained users.
e)Maintain powertools.Check for misalignment or binding of moving parts,breakageof parts and any
other condition that may aect the power tools operation.If damaged,havethe power tool repaired
beforeuse.Many accidents are caused by poorly maintained powertools.
f)Keep cutting tools sharp and clean.Properly maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
g)Use the power tool,accessories and tool bits etc.in accordance with these instructions and in the
manner intended for the particular type of power tool,taking into account the working conditions
and the work to be performed.Use of the power tool for operations dierent from those intended
could result in a hazardous situation.
h)Hold power tool by insulated gripping surfaces,when performing an operation where the cutting
accessory may contact hidden wiring or its own cord.Cutting accessory contacting a “live”wire may
make exposedmetal parts of the powertool “live”and could give the operatoran electric shock.
5)Service
a)Have your power tool serviced by a qualied repair person using only identical replacement
parts.This will ensure that the safety of the powertool is maintained.
ADDITIONAL SAFETY RULES
●Read and understand the owner’s manual and labels axed to the mixer.Learn its application and
