Tonlyware CV1102-HTS Manuel utilisateur
CV1102-HTS User Manual
CV1102-HTS User Manual
Tonlyware Technology Inc. Contact: sales@tonlyware.com 1
CV1102-HTS User Manual
Thank you for purchasing this product. For optimum performance and safety, please read
these instructions carefully before connecting, operating or adjusting this product. Please
keep this manual for future reference.
SURGE PROTECTION DEVICE RECOMMENDED
This product contains sensitive electrical components that may be damaged by electrical
spikes, surges, electric shock, lightning strikes, etc. Use of surge protection systems is highly
recommended in order to protect and extend the life of your equipment.
Tonlyware Technology Inc. Contact: sales@tonlyware.com 2
CV1102-HTS User Manual
Table of Contents
. Introduction.............................................................................................4
2. Features.....................................................................................................4
3. Panel Descriptions.........................................................................................................4
4. Remote Control Descriptions...........................................................................................7
5. Application Diagram........................................................................................................8
6. Specifications..........................................................................................................8
7. Package Contents.......................................................................................9
8. RS-232 Pin Assignment.........................................................................................9
9. RS-232 and Telnet Commands ...................................................................................... 0
0. Maintenance................................................................................................................. 3
. Warranty Policy....................................................................................................... 3
2. Limitations of Warranty......................................................................................... 3
3. Exclusive Remedies........................................................................................ 3
4. RMA Policy........................................................................................... 4
Intro uction:
The CV 02-HTS is a multi-format video presentation scaler switch with audio. It features
inputs of various video formats including HDMI, VGA, Component, Composite, and HDBaseT with
HDMI and HDBaseT outputs. Video can be scaled to various aspect ratios and resolutions from
640x480 up to 920x 080 @ 60Hz.
Embedded splitter and dual switcher modes, it can work as : x2 multiple splitter and 5x
& x dual switcher. It also features a switchable digital bypass output allowing any HDMI
input to be directly bypassed via that HDMI output to cater for the 4K source. With advanced
audio embedding and de-embedding, it can provide flexible audio signal integration. Each
source can be switched to the HDMI output using the front-panel, IR remote control or RS-
232 interface.
The CV 02-HTS integrates easily in various analog to digital applications such as when used
in collaboration environments, lecture halls, conference rooms, class rooms, healthcare
facilities and control centers.
Tonlyware Technology Inc. Contact: sales@tonlyware.com 3
CV1102-HTS User Manual
Features:
Switch & Scale -inputs to 2 HD/UHD displays.
4x HDMI, 4x VGA, x YPbPr, x Composite, xHDBaseT Inputs.
2 simultaneous outputs ( x HDMI, x HDBaseT), bypass and scaled formatted output
selectable.
Dual mode selectable ( x2 Splitter Mode and 5x & x Dual Switcher Mode).
Scaling from 640x480 to 920x 080 @ 60Hz.
HDTV formats up to 4K@30Hz.
HDBaseT POE Transmitter & Receiver supports distance up to 330ft / 00m.
With built in Ethernet Hub.
HDCP .4 compliant.
Audio embedder and audio extractor.
OSD menu for volume control and resolution selection.
Controllable via front panel, IR remote, TCP/IP or RS232.
Front-panel LCD display for status feedback.
Easy installation with rack-mounting ears.
Panel Descriptions
Front Panel
Tonlyware Technology Inc. Contact: sales@tonlyware.com 4
CV1102-HTS User Manual
. LCD display---Show the status of input-output selection, EDID info and so on.
2. IR receiver window----Receive the IR from the remote control of CV 02-HTS.
3. Dual switcher LED indicator---When the LED is lit, dual switcher mode is on. Output HDMI
is selected by HDBT/HDMI /HDMI2/HDMI3/HDMI4 which works as 4K 5x switcher in
by-pass mode; Output HDMI2 is selected by HDBT/HDMI /HDMI2/HDMI3/HDMI4/VGA
/VGA2/VGA3/VGA4/YPbPr/AV, it will always be scaled & formatted output regardless of by-
pass ON/OFF, works as scaling x switcher,
4. Mode button---Press to set Dual Switcher mode ON/OFF.
5. HDBT input selection button---Press to select the output from HDBT input working as 4k
5x switcher.
6. HDMI input to 4 selection buttons---Press to select the output from to 4 working as 4k
5x switcher.
7. Format set button---Press to set the resolution for the output.
8. Menu button---Press to enter EDID set, volume setting or F/W information. Three EDID
segments will display on the LCD panel formatted as: INPUT VIDEO AUDIO, for example:
IN 080P 2.0CH, means to set 080P 2.0CH EDID to INPUT . The blinking segment is
the one can be changed currently; press “Menu” button will change the segment. Segment
content items as below:
INPUT VIDEO AUDIO Note
IN 080I 2.0CH.
IN2 080P 5. CH
IN3 3D 7. CH
IN4 4K2K NONE
IN5 D 024 D 024=DVI 024 x 768
IN6 D 080 D 080=DVI 920 x 080
IN7 D 200 D 200=DVI 920 x 200
IN8 OUT OUT =Copy OUTPUT EDID to INPUTx
IN9 OUT2 OUT2=Copy OUTPUT2 EDID to INPUTx
IN 0
IN
Tonlyware Technology Inc. Contact: sales@tonlyware.com 5
CV1102-HTS User Manual
ALL ALL=Set EDID to ALL INPUTs
Volume can be changed by UP and Down button. During F/W mode，press Enter button
will show the current F/W information.
9. Up selection button--- Press to change segment’s value.
0. Down selection button---Press to change segment’s value.
. Enter button--- Press to confirm the settings.
2. Power LED indicator---Indicate the status of power.
3. Embed LED indicator ---When the LED is lit, embed mode is on. When embed in on, the
L/R in will be embedded in to the HDMI outputs (The two outputs will be embedded with the
L/R in audio and the volume is adjustable)
4. L/R in selection button---Press to embed L/R audio to the HDMI output.
5. HDBT input selection button ---Press to select HDBT input.
6. HDMI input selection button to 4---Press to select the input from to 4.
7. VGA input selection button---Press to select VGA input.
8. YPbPr input selection button---Press to select YPbPr input.
9. AV input selection button---Press to select AV input.
20. ESC---Press to quit EDID set mode.
Back Panel
. VGA input to 4--- VGA input to 4 with L/R audio input.
2. L/R In to 4--- Connect to addition audio input to embed to HDMI output to 4.
Tonlyware Technology Inc. Contact: sales@tonlyware.com 6
CV1102-HTS User Manual
3. AV input--- AV input with L/R audio input.
4. YPbPr input--- YPbPr input with L/R audio input.
5. TCP/IP---Connect to Ethernet for control.
6. RS232 port--- DB9 connector for local control only.
7. DIP switcher---EDID settings.
[DIP]=0000: HDMI 080p@60Hz, Audio 2CH PCM
[DIP]= : Copy EDID from HDMI output, i.e., EDID pass through
[DIP]=000 : HDMI 080p@60Hz, Audio 5. CH PCM/DTS/DOLBY
[DIP]=00 0: HDMI 080p@60Hz, Audio 7. CH PCM/DTS/DOLBY/HD
[DIP]=00 : HDMI 080i@60Hz, Audio 2CH PCM
[DIP]=0 00: HDMI 080i@60Hz, Audio 5. CH PCM/DTS/DOLBY
[DIP]=0 0 : HDMI 080i@60Hz, Audio 7. CH PCM/DTS/DOLBY/HD
[DIP]=0 0: HDMI 080p@60Hz/3D, Audio 2CH PCM
[DIP]=0 : HDMI 080p@60Hz/3D, Audio 5. CH PCM/DTS/DOLBY
[DIP]= 000: HDMI 080p@60Hz/3D, Audio 7. CH PCM/DTS/DOLBY/HD
[DIP]= 00 : HDMI 4K2K, Audio 2CH PCM
[DIP]= 0 0: HDMI 4K2K, Audio 5. CH PCM/DTS/DOLBY
[DIP]= 0 : HDMI 4K2K, Audio 7. CH PCM/DTS/DOLBY/HD
[DIP]= 00: DVI 280x 024@60Hz, Audio None
[DIP]= 0 : DVI 920x 080@60Hz, Audio None
[DIP]= 0: DVI 920x 200@60Hz, Audio None
8. IR RX---Connect to IR receiver cable.
9. IR TX--- Connect to IR emitter cable.
0. Phoenix terminal---Work with HDBT Transmitter / Receiver for RS232 pass through.
. Ethernet port—Connect to Ethernet. (Embedded Ethernet hub)
2. Ethernet port--- Connect to Ethernet port. (Embedded Ethernet hub)
3. Coaxial audio output --- It will always follow HDMI output 2.
4. L/R audio output--- It will always follow HDMI output 2.
5. HDMI output--- Connect to HDTV.
6. HDBT output---Connect to HDBT class A receiver
7. HDBT input--- Connect to HDBT class A transmitter.
8. HDMI input to 4 ---Connect to HDMI sources
9. L/R In --- Connect to Global Audio Input to embed to both HDMI outputs.
20. IR Ext. --- Connect to IR receiver cable.
2 . DC 2V---Connect to 2V/5A power supply.
Tonlyware Technology Inc. Contact: sales@tonlyware.com 7
CV1102-HTS User Manual
Remote Control Description
Application Diagram
Tonlyware Technology Inc. Contact: sales@tonlyware.com 8
CV1102-HTS User Manual
Specifications:
Bandwidth：0.2Gbps
Video Input Connectors: 4x HDMI Type A, 4x VGA, x RJ45, xYPbPr, x AV
Video Output Connectors: x HDMI Type A, x RJ45
Audio Input Connectors: x 3.5mm stereo jack
Audio Output Connectors: x 3.5mm stereo jack, x RCA (SPDIF)
RS-232 serial port: x DB 9 connector, x 3 phoenix terminal
TCP/IP x RJ45
IR Input ports: 2x 3.5mm stereo jack
IR Output ports: x 3.5mm mono jack
Tonlyware Technology Inc. Contact: sales@tonlyware.com 9
CV1102-HTS User Manual
Dimensions (W x H x D): 438mm x 225mm x 44mm , without feet
Shipping Weight: .2Kg
Operating Temperature: 32°F to 04°F (0°C to 40°C)
Storage Temperature : -4°F to 40°F (-20°C to 60°C)
Power Supply: DC 2V/5A
Package Contents:
. x CV 02-HTS.
2. x 2V/5A power supply.
3. x Remote control.
4. 3x IR Emitter
5. 4x IR Receiver.
6. x Rack-mounting ears
RS-232 Pin Assignment
Tonlyware Technology Inc. Contact: sales@tonlyware.com 10
CV 02-HTS Remote Control
Console
PIN Assignment PIN Assignment
NC NC
2 Tx 2 Rx
3 Rx 3 Tx
4 NC 4 NC
5 GND 5 GND
6 NC 6 NC
7 NC 7 NC
8 NC 8 NC
9 NC 9 NC
Table des matières
