TMG TMG-S2 Mode d'emploi
TROUBLESHOOTING
TENSIOMYOGRAPHY
ADDITIONAL RESOURCES AND SUPPORT [email protected]
TENSIOMYOGRAPHY
THE RED LIGHT ON THE TOP LEFT CORNER
THE RED LIGHT ON THE TOP RIGHT CORNER
NO RESPONSE FROM THE STIMULATOR
Battery is empty. Please recharge the battery.
Make sure that the stimulator is switched off before charging, otherwise it will not be charge.
Set control button on MIN (0).
Check fuse on the back pannel.
TROUBLESHOOTING
TENSIOMYOGRAPHY
ADDITIONAL RESOURCES AND SUPPORT
TENSIOMYOGRAPHY
In case the message »Time out error« appears, change »Put the computer to sleep« to »Never« under
Edit Plan Settings (Control Panel / Hardware and Sound / Power Options/ Edit PlanSettings) - Fig. 1.
Furthermore change »When I close the lid« to »Do nothing« both in battery and plugged - in
mode, under Edit Plan Settings (Control Panel / Hardware and Sound / Power Options / System
Settings) - Fig. 2
Fig. 1Fig. 2
In casethe message»No Response From Device« appears, make sure the stimulator
is connected and turned on. Check if the COM port is set in the settings menu.
If the port reads test, press scan to set actual port.
Table des matières
Autres manuels TMG Instrument de mesure
Manuels Instrument de mesure populaires d'autres marques
Endress+Hauser
Endress+Hauser Proline Promag 50 Caractéristiques techniques
Siemens
Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces
KLINGER
KLINGER CMF V Series Manuel utilisateur
EXFO
EXFO FTB-2 Manuel d'exploitation et d'entretien
Keysight
Keysight M8290A Manuel utilisateur
ADTEK
ADTEK MW-5 Manuel utilisateur