172-65744MA-00 (iT5-ZB Battery Replacement Procedures) 3 Mar 2022
Contents
Safety Considerations........................................................ 1
1. Storing the battery pack ................................................. 3
2. Replacing the ZB sensor battery.................................... 3
3. Replacing the ZB repeater battery ................................. 6
4. After replacing the battery of the ZB system.................. 9
Safety Considerations
Read this section carefully before use and be sure to follow the instructions.
Installation, inspection, maintenance, repairs, disassembly, adjustment and valve
opening/closing should be carried out only by trained maintenance personnel.
The precautions listed in this manual are designed to ensure safety and prevent
equipment damage and personal injury. For situations that may occur as a result of
erroneous handling, three different types of cautionary items are used to indicate the
degree of urgency and the scale of potential damage and danger: DANGER,
WARNING and CAUTION.
The three types of cautionary items above are very important for safety: be sure to
observe all of them as they relate to installation, use, maintenance, and repair.
Furthermore, TLV accepts no responsibility for any accidents or damage occurring
as a result of failure to observe these precautions.
Symbols
Indicates a DANGER, WARNING or CAUTION item.
Indicates an urgent situation which poses a threat of death or serious
injury
Indicates that there is a potential threat of death or serious injury
Indicates that there is a possibility of injury or equipment/product
damage
Do not apply heat to the battery pack or throw it into a fire.
Failure to observe this precaution could result in leakage of the
battery fluid, excessive heat generation, rupture or ignition.
Do not disassemble the battery pack.
Failure to observe this precaution could result in leakage of the
battery fluid, excessive heat generation, rupture or ignition.
Do not cause the battery pack to become wet by immersing in
water, salt water or liquid chemicals.
Failure to observe this precaution could result in leakage of the
battery fluid, excessive heat generation, rupture or ignition.
Do not wipe/rub the surfaces of this product with a dry cloth
etc.
There is the danger of electrostatically charging the unit, which may
result in ignition or explosions, especially in hazardous locations.
Continued on the next page
