9
English
re-sound after 7 minutes. During Snooze, a count down will be shown on the display except
when the analog clock face is displayed. The Snooze time is not adjustable.
8. PRESETS #1-5/music player controls: Your NetWorks has five Internet radio stations
already saved to the presets for you to enjoy. Should you wish to replace them with your
own selections, press and hold a preset button to save the currently tuned station to a preset.
“PresetSaved”willbrieyshowonthedisplay.Oncestored,pressthepresetbuttonbrieyto
recall the station associated with that preset. There are 5 presets for Internet radio and 5 for
the FM band. If no station has been stored and the preset button is pressed, the display will
show“PresetEmpty”.PresetscannotbestoredinMusicPlayermode.Thiswillnotworkwhen
the Source menu is displayed.
9. INFO: In Internet radio mode,theInfobuttonwillcyclethroughcurrentstatus(“Playing”or
“Stationunavailable”),audioformat,stationdescription,genre,andstationlocation.Each
time a station is tuned the Info category will default to current playing status. Other Info
categories are available when playing Podcasts. When playing Podcasts, the Info button will
cycle through Episode name, Description, Show description, Genre, and Location.
In Music Player mode, for Shared Media, the Info button will cycle through artist, song,
album, and format. For Shared Folders and a USB device, the Info button will cycle between
filename, path, and format.
In FM mode, if RDS is available, the Info button will cycle through radio text, station frequency,
and program type. If any category of information is not provided by the station the info category
will be blank.
10. SLEEP: Press to start the 20 minute sleep timer. The NetWorks will display the remaining
sleep time and automatically power off after 20 minutes. Press again to cancel the sleep timer.
The amount of sleep time is not adjustable.
11. TUNING +/–: In FM mode only, use these buttons to move up or down through the FM
frequencies. Press and hold to move quickly up or down through the frequencies. Press for 2
seconds and release to scan up or down to the next strongest FM station. In the main menu
under“Scansetting”youcanselectthesensitivityofthescanfrom“Strongstationsonly”or
“Allstations”.Selecting“Allstations”willcausethetunertostoponmorestations,including
interference. When tuning FM stations from the NetWorks rear panel, use the pq buttons.
12. ALARM: Presstoaccessthealarmmenu.Formoresee“HowTosettheAlarm”.
The sensor for the remote control is positioned in the lower left corner of the front panel
display. When using the remote, aim it in this general direction. Sunlight flooding the sensor can
sometimes cause erratic behavior.
When replacing the remote’s battery, use a brand name 3V lithium button cell, model number
CR2025. Install the battery so the positive side is facing you. Dispose of the spent battery
according to your country’s regulations. Do not incinerate.
When using the remote control within close proximity to the front panel remote sensor, you might
notice some flashing of the display. This is normal.
