Titan TTS-NP Series Manuel utilisateur
1
Models of the TTS-NP series
Industrial videoscope with 2 or 4 way swiveling
camera head
User manual
2
Safety recommendations
This device must not be used for medical or veterinary purposes.
Do not use this item in explosive atmospheres.
Do not modify or disassemble the unit.
Do not subject the insertion tube (camera cable) or other cables to strong pulling.
Do not move the display unit around by holding the cables. Otherwise the insertion tube or cables may
be damaged.
Do not subject the distal end and the angulation section to severe impact, pulling or bending. Otherwise
the precision components that make up the distal end and the angulation section may be damaged.
Do not allow any other liquids than water, saltwater, machine or diesel oil to come into contact with the
insertion tube. Otherwise the insertion tube may be damaged.
Do not allow water to come into contact with other parts than insertion tube. Water creates the risk of
electric shock. All parts of the device, except of the camera cable and camera head are not waterproof.
That’s why the main unit should not be submerged into liquids or being used or stored in wet
environment. Don’t use or store the device at temperatures higher than 60°C or lower than -20°C and
store it in dry and adequately ventilated environment.
3
Open the battery compartment
1. Use the supplied screwdriver to remove the screw at the bottom of the handle and pull out the
battery compartment.
2. Open the battery compartment by lifting the cover carefully.
3. Replace the 2 supplied batteries, observe correct polarity.
4. Close the cover of the battery compartment. Make sure that the two small hooks at the top inside of
the cover hook into the two small slots inside at the top of the battery compartment.
5. Reinstall the battery compartment and tighten the screw.
Charging the batteries
Insert the 2 Li-ion batteries into the supplied battery charger. Pay attention to correct polarity.
Plug the charger into a standard wall outlet.
The charging is finished when the 2 indicator lights at the top of the charger turns green. Charging
time to reach full charge needs approx. 7 hours. The fully charged battery can continuously works
up to 8 hours.
Note: Do not mix old and new batteries. Do not mix alkaline standard (carbon-zinc) and
rechargeable (nickel cadmium) batteries.
Never dispose of the device or used batteries/rechargeable batteries in
household waste. The user is obligated to take end-of-life devices to a
designated collection point for the disposal of electrical and electronic
equipment. And consumers are legally required to take used batteries
to appropriate collection sites, the retail store where the batteries were
purchased, or wherever batteries are sold.
4
Parts and their functions
01 display 08 arrow key up 15 DC in
02 playback
09 MENU button
16 reset
03 charge i
ndicator
10 OK 17 headphone
04 power indicator 11 camera cable 18 video key
05 freeze k
ey
12 m
icro USB
19 illumination/brightness
06 arrow key down
13 HDMI o
utput
20 snapshot
07 power on/off 14 TF card slot 21 exposure to light
(except of TTS-S08-6.0(D)
– there this button means
lens change - front to side
and vice versa)
5
t
Button Preview mode Playback mode Indication mode Menu mode
no function switch to next
photo or video
adjust optional
functions or options
select previous function
or option
no function go to the previous
photo or video
adjust optional
functions or options
select next function or
option
enter to menu mode enter into menu
mode
enter to menu mode no function
choose indication mode combined with
to confirm
deleting of files
choose next function confirm selection
or option
enter into playback mode return to preview
mode
enter into playback
mode
no function
freeze image delete this file freeze image return to the preview
mode/indication mode
power off power off power off power off
illumination/
brightness
no function illumination/
brightness
no function
start /stop
video recording
Press this button to start
video recording. REC
appears in the top left
corner to indicate
recording status. Press it
again to stop recording.
REC will disappear
accordingly.
select recorded
videos
start /stop
video recording
Press this button to
start video recording.
REC appears in the
top left corner to
indicate recording
status. Press it
again to stop
recording. REC
will disappear
accordingly.
no function
Snapshot – press this
button to take a picture.
After that system
automatically returns to
preview mode.
select recorded
photos
Snapshot – press this
button to take a
picture. After that
system automatically
returns to preview
mode.
no function
Button description
6
There are 4 basic modes for easier usage:
Operation
brightness (except for
model TTS-S08-6.0(D) –
there this button means
lens change - front to side
and vice versa)
no function brightness (except
for model
TTS-S08-6.0(D) –
there this button
means lens change -
front to side and vice
versa)
no function
preview mode live image, snapshot, video recording
playback mode view photos or videos on memory card or delete them
indication mode optional functions as:
illumination, brightness , exposure, zoom, freeze,
rotation, image colors, screen format, white balance
menu mode system settings
Operation modes
7
Button Function
brightness (5 levels)
exposure (0.0, + 1,0, +2,0, -2.0, -1,0)
zoom (original = 1x, 2x, 4x, 8x)
freeze image
90° image rotation (up, down, left, right)
adjusting image colours: original, negative, black & white
change between full screen and 16:9
scale for measurements – currently without function
white balance (AUTO, cloudy)
Buttons of indication mode and their functions
8
Press the MENU button in preview or indication mode to display options as follows:
For all options of the system setting applies:
Choose the respective options by moving with the arrow keys and confirm your
selection with OK. You can leave the menu mode and return to preview mode by pressing the
‘freeze’ button (except under the ‘Date & Time’ option. Under ‘Date & Time’ you can leave
by pressing OK.)
Language
You can choose between 10 languages. Use the arrow keys to move up and down and confirm your
selected language with OK.
System settings in menu mode
9
Date & Time
Confirm your selection of ‘Date & Time’ with OK. A new submenu will open. A red cursor shows
you the adjustable values like year, month, date (YY/MM/DD), hours and minutes. Increase the
value by pressing the up arrow and reduce it by pressing the down arrow .
You can move the red cursor to the next value by pressing the ‘freeze’ button
Power Save
Adjust the time limit for automatically shut off. You can choose between OFF (without
automatically shut off), 1 min., 3 min. and 5 minutes.
10
Date Stamp
The ‘Date Stamp’ function allows you to add the recorded date and time on your photos or videos.
You 3 options:
OFF: Photos and videos are shown WITHOUT date and time.
Date: Date of the recording appears on the photos and videos.
Date&Time: Date and time of the recording appears on the photos and videos.
Format
‘Format’ means to erase all data stored on memory card. But please note that all data are deleted
irrevocably. If you choose ‘Format’ a submenu will open where you can choose ‘Yes’ or ‘No’. Yes
deletes all photos and videos. If you select ‘No’ nothing will happen and you will return so the all
system settings in menu mode.
Table des matières
