Titan EyeX Smart eyewear Manuel utilisateur
Titan EyeX Smart
eyewear
User Guide
P a g e | 1
TABLE OF CONTENTS
Getting Started ………………………………… 03
•Warning …………………………………………................. 03
•Charging ……………………………………………………. 04
•Touch Input ………………………………………………… 05
•Power on the Device ……………………………………… 06
•Install the Phone App. ……………………………………. 07
•Connect your Glasses to your Phone …………………. 10
•Configure your Glasses using the phone App. ……… 11
Device Usage ………………………………….. 12
•Checking Battery level and connection status ……… 12
•Functions supported by default without the App. ….. 13
▪Incoming Call ………………………………………….. 13
▪Music Play ……………………………………………… 14
▪Voice Assistant (Ok Google or Siri) ……………….. 14
▪Alexa …………………………………………………….. 15
▪Instructions to Configure and add device in Alexa. 15
App Functionality ……………………………….. 16
•App. Interface ………………………………………………. 16
•Functions Provided with the App. ……………………… 17
•Additional Features with App. …………………………... 18
▪App. Main Screen & Fitness Screen ……………….. 18
▪Find Glasses …………………………………………… 19
▪Locate Glasses ………………………………………… 19
▪Play Notifications ……………………………………… 20
▪Calendar Alert ………………………………………….. 22
▪Custom Swipe 1 ……………………………………….. 23
▪Custom Swipe 2 ……………………………………….. 24
▪Presentation Control ………………………………….. 25
▪PPT control software on Windows Computer ……. 26
▪Glasses Settings ………………………………………. 27
•Set Goals &units. …………………………………………….. 27
•Sedentary Reminder ……………………………………… 28
•Notifications ………………………………………………... 28
•My Account …………………………………………………. 28
•Firmware Update …………………………………………… 29
•Unpair & Factory reset ……………………………………. 29
•Quit app……… ……………………………………………. 29
P a g e | 2
TABLE OF CONTENTS
Device Reset ……………………………………… 30
•Pairing to Phone or Switching Phones …………………. 30
•Peer to Master connection ………………………………… 30
•Eyecare menu………………………………………………… 31
Touch Operation summary……………………… 32
Specifications …………………………………….. 33
Warranty & Support ……………………………… 34
Regulatory & Notices ……………………………. 35
Note that this manual covers the new swipe-touch based functions
and manual connection starting with software version 2.1.0. Please
refer to old manual for functions using old touch and auto wake up
connections before this version
P a g e | 3
Getting Started
Warning:
The device plastics are fully sealed for waterproofing. Any
attempt to tamper will void warranty.
Right Temple
is Master
Left Temple
is Peer
Touch Area
Left
Touch Area
Right
LED
Speaker
Directional
Audio
Front Rim
Mic
Touch Start
Touch End
P a g e | 4
Getting Started
Charging:
Charge the unit before first time use. Full charge takes
about two hours.
Charger cable with magnetic pogo pin is used for
charging. The charger comes with Y-Split cable with two
connectors having left & right indication. Connect the
connectors to the temples (Right, Left).
Blue LED indicates device is charging.
Upon charge completion, the LED turns Green.
Please note that the EyeX is not usable during
charging. The device disconnects from phone
during charging and reconnects upon
removing charger
Direction of the connector with
cable running towards back
P a g e | 5
Getting Started
The right side temple is the master device that connects
to the phone and has a built-in mic. The left side temple
is the peer device that connects to master and gets audio
from the master.
Touch Input:
The touch start and end areas are shown below. With
each swipe of the touch area you will hear haptic sound
of clicking (in some modes, you will hear ding sound
instead of clicking).
Swipe Backward
Swipe Forward
P a g e | 6
Getting Started
Power on the device
Power On:
Swipe front on the touch area of the right temple and the
left temple. If prompted to swipe again, please do so.
Note that if the device is powering on from upside down
mode, it will power on with just a touch also
The temples will boot up and announce powering on.
Master and Peer have to be powered on individually.
This operation is needed only when the device is in
powered off state.
There will be 2-3 second delay in haptic click sound with
touch swipe during power on
Power Off:
If placing the glasses in upside down state, it will power
off
If full power off is needed, swipe backward on the left
temple. When asked to confirm, swipe backward again on
left temple to confirm Power Off. The device will play
power off and then shutdown.
P a g e | 7
Power-Off Positions
Glasses placed upside down
Glasses folding and placed upside down
In these two upside-down positions, the glasses will power
off after 10 seconds. To power on, you pick up the glasses
and touch the touch area on both temples.
Please note that the above description is for default off state
of “Auto power on (Beta)” setting in advanced setting. Please
refer Advanced settings section for description when this
setting is on
P a g e | 8
Getting Started
Bluetooth connection from phone to glasses
•The Device is shipped in power off mode
•Make sure the device is powered on
•Make sure blue LED is blinking fast (once in 2 seconds)
(discoverable mode) on the right temple. If not, you
might have to do factory reset the glasses (swipe
backward and forward on right temple)
•Make sure that your phone’s Bluetooth® is turned on.
•Go to the phone’s Bluetooth menu and pair to Titan
EyeX-XXXX from the available device list. If you see
two devices with same EyeX names, please connect to
device with headset icon.
Note that the headset icon represents the audio
connection and other icon represents the BLE data
connection. In some cases you will see both icons
connected in the Bluetooth menu.
•On Android phones make sure to select “Pair” when
phone gives Bluetooth pair request. This step is very
important for reliable Bluetooth connection. (If this
step is missed, user will have to restart new Bluetooth
connection with factory reset).
P a g e | 9
•In iPhone, please make sure the connected EyeX
device in Bluetooth list has ‘i’ next to it. If this is missing,
it has bad Bluetooth connection. You need to
disconnect and reconnect again. This can be done by
unpairing or by doing factory reset. Sometimes you will
see two EyeX connections one with ‘i’ and one without
‘i’. This is normal and does not cause any problem.
•Once paired the master temple LED will blink Green.
The audio message will play the connection status
Please note that you should wear or keep
the frames in upright position during setup
process. If the frames are kept upside
down, the frames will power off and will not
work
Table des matières
Manuels Lunettes 3D populaires d'autres marques
Silhouette
Silhouette TITAN DESIGN Instructions de montage
Soundcore
Soundcore Frames Manuel utilisateur
Wiseup
Wiseup GL2000 Manuel utilisateur
Eschenbach
Eschenbach MaxTV Manuel utilisateur
Mini Gadgets
Mini Gadgets GLSun720 Manuel utilisateur
Happy Electronics
Happy Electronics Mindroid Glasses Manuel utilisateur
