Eyedaptic EYE5 Manuel utilisateur

www.eyedaptic.com

EYE5

Eyedaptic Glasses User Manual

Version 5.0.0/0

EYE5 MD3

Enhancing Vision To Revitalize Life

Package Contents

(A) EYE5 glasses

(B) Mobile phone with pre-installed

software to control EYE5 glasses

phone (L shaped plug)

(D) USB charger block

(E) Charging cable for the PHONE only

*Cables (C) and (E) are NOT interchangeable

EYE5 Glasses (A) - Parts Overview

EYE5 connection port

Use the included data cable to

connect the phone to the glasses

EyeSwitch toggle button

L shaped side of the data cable (C)

plugs into glasses - must use this

data cable for the glasses to work

Adjustable nose pad

EYE5 Phone (B) –Parts Overview

Charging and connection port

This same port is used for charging the phone

and for connecting the phone to the glasses

EYE5 control app icon

(visible when powered on)

Power save mode

Press once to turn off

the phone display, but

leave the glasses on

Press again to turn

phone display back on Sleep mode and

power button

Press button once

to turn off glasses

and phone screen

Hold down button

for 5 seconds to

power on/off

phone and glasses

entirely

Zoom adjuster

Press the up/down

buttons to adjust

zoom level

•To power on the phone: hold the power button for

5 seconds, or until the screen lights up

•To power off the phone: hold the power button

for 5 seconds, click on the "Power Off" option, and

the screen will go dark

How to Power On/Off

Power button

(lower button)

"Power Off"

How to Charge the Phone

Only the phone needs to be charged, the glasses do not need to be charged

1. Plug the charging cable (E)

into the charging block (D)

2. Plug the charging cable (E)

into the phone (B)

DO NOT USE THE DATA CABLE FOR CHARGING

3. Plug the charger into an outlet

4. Charge until the phone

battery reaches 100%

*The phone will always stay ON while charging, it cannot be turned off

(A)

(D)

(E)

Sleep Mode

To activate sleep mode: press the power button once (top

right) - the phone screen AND glasses will go dark

To exit sleep mode: press the power button again (top right)

- the phone screen AND glasses will turn back on

Sleep mode puts the phone display and the glasses to sleep, but does not

completely turn off the device –this will save battery

Power

button

Phone is in sleep mode,

glasses are off

To activate power save mode: press the top left button once

–the screen will go dark and a flashing arrow will appear

To exit power save mode: press the top left button again –

the screen will turn back on

Power Save Mode

Power save mode turns the phone screen off, but the glasses remain on

This mode is ideal for situations where the phone screen is distracting (ie. movie theaters)

Power save

button

Phone is in power save

mode, glasses are still on

Setting up the Phone & Glasses

1. Before using EYE5 glasses for the first time:

a) Fully charge the phone battery, until light at the top of the

phone turns green or percentage on the phone is 100%

2. After the battery is charged:

a) Make sure the phone is not connected to any cables

b) Power on the phone by holding down the power button

c) This phone takes several seconds to start up and shows

various screens before it is ready to use

READY TOGO

Setting up the Phone & Glasses

1. Connect the phone to the glasses:

a) To do this, plug the L shaped side of the data

connection cable (C) into the glasses (A) and the other side

into the phone (B)

2. Wait for the EYE5 app to launch automatically or press the

Eyedaptic logo to start the app

a) If the app does not open, unplug the cable from the phone, wait 5 seconds,

plug the cable back in, and try again

3. The first time the app is opened, a EULA acceptance will pop

up –this must be accepted to use the app

(A)

(B)

(C)

Table des matières

Manuels Lunettes 3D populaires d'autres marques

Sony

Sony BKM-30G Manuel utilisateur

Samsung

Samsung Gear VR SM-R322 Manuel utilisateur

Segula

Segula 50546 Manuel utilisateur

LG 360 VR Manuel utilisateur

Wicked3D

Wicked3D eyeSCREAM Manuel utilisateur

Silhouette

Silhouette TITAN DESIGN Instructions de montage

Soundcore

Soundcore Frames Manuel utilisateur

Wiseup

Wiseup GL2000 Manuel utilisateur

Eschenbach

Eschenbach MaxTV Manuel utilisateur

Mini Gadgets

Mini Gadgets GLSun720 Manuel utilisateur

Happy Electronics

Happy Electronics Mindroid Glasses Manuel utilisateur

BASETech

BASETech 1456965 Manuel utilisateur

YEAZ

YEAZ SUNUP Manuel utilisateur

Dimensional Optics

Dimensional Optics Active 3D Manuel utilisateur

xelux

xelux Smartglass I3 LED Manuel utilisateur

Cyclopital3D

Cyclopital3D HD3D View-Vaster Manuel utilisateur

Panasonic

Panasonic TY-EP3D10EB Manuel utilisateur

Rollei

Rollei Sunglasses Cam 100 Manuel utilisateur