4
•Practice Safe Maintenance
•Understand procedure before doing work. Use proper tools and equipment; refer to Operator’s
Manual for additional information.
•Work in a clean, dry area
•Lower the implement to the ground, put the tractor in park, turn off the engine, and remove the key
before maintenance.
•Allow implement to cool completely.
•Do not grease or oil implement while it is in operation.
•Inspect all parts. Make sure details are in good condition and installed correctly.
•Remove the buildup of grease, oil, or debris.
•Remove all tools and unused parts from implementation before operation.
PREPARE FOR EMERGENCIES
•Be prepared if a fire starts.
•Keep a first aid kit and fire extinguisher handy
•Keep emergency numbers for doctor, ambulance, hospital, and fire department near the phone.
WEAR PROTECTIVE EQUIPMENT
•Wear protective clothing and equipment appropriate for the job. Avoid loose-fitting clothing.
•Prolonged exposure to loud noise can cause hearing impairment or hearing loss. Wear suitable
hearing protection such as earmuffs or earplugs.
•Operating equipment safety requires the full attention of the operator. Avoid wearing radio
headphones while operating machinery.
AVOID HIGH-PRESSURE FLUIDS HAZARD
•Escaping fluid under pressure can penetrate the skin causing severe injury.
•Avoid the hazard by relieving pressure before disconnecting hydraulic lines or performing work on
the system.
•Ensure all hydraulic fluid connections are tight and all hydraulic hoses and lines are in good condition
before applying pressure to the system.
•Use a piece of paper or cardboard, NOT BODY PARTS, to check for suspected leaks.
•Wear protective gloves and safety glasses or goggles when working with hydraulic systems.
•If an accident occurs, see a doctor immediately. Remember, any fluid injected into the skin must be
treated within a few hours, or gangrene may result
TIRE SAFETY
•Tire changing can be dangerous, and trained personnel should be the only ones using correct tools
and equipment.
•When inflating tires, use a clip-on chuck and extension hose long enough to allow you to stand to one
side and NOT in front of or over the tire assembly. Use a safety cage if available.
•When removing and installing wheels, use wheel handling equipment adequate for the weight
involved.
•
