Timex W217 NA Manuel utilisateur

W217 AS 111-095012

W217_AS_Cvr_W217_AS_Cvr 3/9/10 11:09 AM Page cvr1

English page 2

日本語ページ 28

中文页码 54

Pусский страница 80

W217_AS_Cvr_W217_AS_Cvr 3/9/10 11:09 AM Page cvr3

TIMEX®WATCHES

Congratulations on purchasing your TIMEX®watch.

Please read these instructions carefully to

understand how to operate your Timex timepiece.

Your watch may not have all of the features

described in this booklet.

For more information, please visit:

www.timex.com

W217_AS_EN_analoglayout_4 3/9/10 10:59 AM Page ENi

TABLE OF CONTENTS

2 How to Start Your Watch

3 Water and Shock Resistance

4 Indiglo®Night-Light

5Date Models

7 Day/Date Models

8 Easy Set Alarm

12 Perpetual Calendar

15 Elapsed Time Ring

17 Tachymeter Ring

18 Compass Ring

19 How to Adjust Bracelet

21 Bracelet Link Removal

22 Battery

23 Warranty

ENGLISH

W217_AS_EN_analoglayout_4 3/9/10 10:59 AM Page ENii

WATER AND SHOCK RESISTANCE

If your watch is water-resistant, meter marking

(WR_M) is indicated.

*pounds per square inch absolute

WARNING: TO MAINTAIN WATER-RESISTANCE,

DO NOT PRESS ANY BUTTONS OR PULL OUT

THE CROWN UNDER WATER UNLESS YOUR

WATCH IS INDICATED AS 200 METER WATER-

RESISTANT.

ENGLISH

HOW TO START YOUR WATCH

To start your watch remove the plastic guard from

under the crown, then press the crown in against

the case. The second hand will begin advancing in

one-second intervals.

Some deep-depth water-resistant watches require

the setting crown to be screwed in to secure

water-resistance. If your watch case has a protrusion

with screw threads, the crown must be screwed in

after setting the watch.

To screw in, push the crown firmly against the

threaded protrusion and hold in while turning the

crown clockwise. Continue to screw in the crown

until it is tight. You will need to unscrew the crown

(counter-clockwise) before pulling it out the next time

you want to set your watch.

ENGLISH

Water-Resistance Depth p.s.i.a. * Water pressure

Below Surface

30m/98ft 60

50m/164ft 86

100m/328ft 160

200m/656ft 284

W217_AS_EN_analoglayout_4 3/9/10 10:59 AM Page 2

DATE MODELS

TO SET TIME:

1) PULL crown all the

way out and turn to

correct time.

2) Push crown in to

restart. For screw-in

setting crown, push

crown in while turning

CLOCKWISE to tighten.

Watches with date: Note correct time of day

(A.M or P.M.) for proper date function.

TO SET DAY:

1) PULL crown to “middle” position and turn

CLOCKWISE until correct day appears. If day does

not change, pull crown to “out” position and turn

CLOCKWISE or COUNTERCLOCKWISE through

necessary number of 24 hour periods until

correct day appears.

CROWN

POSITION

DATE

ENGLISH

1. Watch is water-resistant only as long as crystal,

crown and case remain intact.

2. Watch is not a diver watch and should not be

used for diving.

3. Rinse watch with fresh water after exposure to

salt water.

4. Shock-resistance will be indicated on the watch

face or caseback. Watches are designed to pass

ISO test for shock-resistance. However, care

should be taken to avoid damaging the crystal.

INDIGLO®NIGHT-LIGHT

Press button or crown to activate light.

Electroluminescent technology used in the INDIGLO®

night-light illuminates entire watch face at night and in

low light conditions.

ENGLISH

W217_AS_EN_analoglayout_4 3/9/10 10:59 AM Page 4

DAY / DATE MODELS

TO SET THE TIME:

1) PULL the crown out

to the “C” position.

2) TURN the crown

either way to the

correct time.

3) PUSH in the crown to

the “A” position.

TO SET THE DATE:

1) PULL the crown out to the “B” position.

2) TURN the crown either way to the correct date.

3) PUSH in the crown to the “A” position.

TO SET THE DAY:

1) PULL the crown out to the “C” position.

2) TURN the crown either way for full 24 hour cycle

to set day.

3) PUSH the crown in to the “A” position.

ENGLISH

TO SET “QUICK DATE®” FEATURE:

3-Position Crown:

1) Pull crown to “Middle” position and turn CLOCK-

WISE or COUNTERCLOCKWISE until correct date

appears.

2-Position Crown:

1) Pull crown to “OUT” position and turn CLOCKWISE

until date changes. Repeat until correct date

appears. Adjust date when month has less than

31 days. Push crown in when finished.

Caution: Wearing or storing the watch with the crown

in the "middle" position will cause damage to the move-

ment. Always return the crown to the normal position,

or if you wish to save the battery life while storing the

watch, leave the crown in the "out" position.

The date function advances the date between the

hours of 10 PM and 2 AM. Avoid setting the date

during this timeframe. If you attempt to set the date

during this time period, rotate the crown at a very

slow rate to avoid damaging the watch.

ENGLISH

CROWN

POSITION

DAY/DATE

W217_AS_EN_analoglayout_4 3/9/10 10:59 AM Page 6

EASY SET ALARM DATE & TIME SETTINGS

TO SET THE DATE:

1) With the TIMEKEEPING CROWN in the “B” position

TURN the TIMEKEEPING CROWN or TURNING RING

in either direction to set the date.

TO SET THE TIME:

1) With the TIMEKEEPING CROWN in the “C” position

TURN the TIMEKEEPING CROWN or TURNING RING

in either direction to set the time.

EASY SET ALARM SETTINGS

1) Your easy set alarm watch is equipped with two

types of alarms:

2) 12-Hour Alarm: rings OR vibrates twice per day at

the desired hour and minute as long as the alarm

is activated. (Alarm crown must be in “E” position.)

3) Hourly Alarm: rings OR vibrates every hour at the

desired minute if activated. (Alarm crown must be

in “F” position.)

ENGLISH

EASY SET ALARM

WITH DATE & INDIGLO®NIGHT-LIGHT

1) From the “A” position, PUSH the TIMEKEEPING

CROWN in (towards the watch case) to activate

the INDIGLO®Night-Light and illuminate the watch

dial.

ENGLISH

A B C POSITION

POSITION

D E F

ALARM CROWN

PULL CROWN “OUT” TO ACTIVATE

THE ALARM

TIMEKEEPING / INDIGLO®

NIGHT-LIGHT CROWN.

PUSH CROWN TO ACTIVATE

THE INDIGLO NIGHT-LIGHT

HOUR MARKER

ALARM SET

TURNING RING

MINUTE MARKER

W217_AS_EN_analoglayout_4 3/9/10 10:59 AM Page 8

TO SET THE HOURLY ALARM:

1) With the ALARM CROWN in the “D” position, TURN

the ALARM CROWN or TURNING RING in either

direction to set the minute alarm marker.

2) To activate the alarm to ring or vibrate at the

desired minute, PULL the ALARM CROWN out to

the “F” position. Three beeps sound and flash

OR a vibration indicates the Hourly Alarm is

activated.

3) The alarm will sound and the dial will flash OR

vibrate at the desired minute and will repeat

every hour on the specified minute unless the

alarm is deactivated.

NOTE: Alarm is deactivated when the ALARM

CROWN is in the “D” position.

If the alarm is not deactivated it will automatically

stop ringing after 20 beeps and flashes OR stop

vibrating, and will resume again in one hour at

the indicated minute.

ENGLISH

TO SET THE 12-HOUR ALARM:

1) With the ALARM CROWN in the “D” position,

TURN the ALARM CROWN or TURNING RING in

either direction to set the hour and minute alarm

markers. To activate the alarm to ring or vibrate at

the desired time, PULL the ALARM CROWN out to

the “E” position. A single beep sound and flash,

OR a vibration will indicate that the 12-Hour

Alarm is activated.

2) The alarm will sound and the dial will flash OR

vibrate at the desired time (hour and minute) and

will repeat every twelve hours unless the alarm is

deactivated.

NOTE: Alarm is deactivated when the ALARM

CROWN is in the “D” position.

If the alarm is not deactivated it will automatically

stop ringing after 20 beeps and flashes OR stop

vibrating, and will resume in 12 hours at the

indicated time.

ENGLISH

W217_AS_EN_analoglayout_4 3/9/10 10:59 AM Page 10

TO SET TIME

To set time, simply pull crown all the way out and

turn. Day and date change automatically when time

is adjusted past midnight; there is no additional step

for setting day or date. Push crown in when done.

After setting, if date changes at noon, time needs to

be adjusted ahead or back 12 hours.

If crown is accidentally put in MIDDLE position and

turned, date display will change temporarily, but date

setting is unaffected. Simply pull crown all the way

out and set time. Proper date display will resume.

7-YEAR BATTERY LIFE* WITH

FREE LIFETIME REPLACEMENT**

If the battery needs to be changed, we recommend

that only TIMEX replace it. Your watch will need to be

recalibrated to correct time and date after changing

the battery. To return your watch to Timex use a pre-

paid shipper. To obtain a pre-paid shipper please call

1-800-448-4639 or visit the retailer where you

purchased your watch or go to www.TIMEX.com.

Please include the following with your watch to cover

ENGLISH

PERPETUAL CALENDAR

Your Perpetual Calendar watch accurately keeps

track of how many days are in each month. It also

adjusts for leap years. The date on your watch

(including the month and year) was preset at the

factory to Eastern Standard Time, Greenwich Mean

Time or Hong Kong Standard Time (depending on

where you purchased your watch). You only need to

adjust the time.

ENGLISH

WED 14

MIDDLE OUT

CHECK DATE

(FACTORY USE ONLY)

SET TIME

DAY, DATE

W217_AS_EN_analoglayout_4 3/9/10 10:59 AM Page 12

Autres manuels pour W217 NA

Table des matières

Langues :

Autres manuels Timex Montre

Timex

Timex W-90 Manuel utilisateur

Timex

Timex Expedition WS4 Manuel utilisateur

Timex

Timex FamilyConnect SENIOR Manuel utilisateur

Timex

Timex 939-095000 Manuel utilisateur

Timex

Timex COMMAND ENCOUNTER Manuel utilisateur

Timex

Timex Metropolitan+ Manuel utilisateur

Timex

Timex Helix Manuel utilisateur

Timex

Timex 94 Manuel utilisateur

Timex

Timex i-Control TMXM805 Manuel

Timex

Timex W196 Manuel utilisateur

Timex

Timex 127-095000 Manuel utilisateur

Timex

Timex W92 Manuel utilisateur

Timex

Timex Ironman Manuel utilisateur

Timex

Timex W-92 Manuel utilisateur

Timex

Timex IronMan Run x50+ Manuel utilisateur

Timex

Timex 104 Manuel utilisateur

Timex

Timex IRONMAN ONE GPS+ Manuel utilisateur

Timex

Timex 688-095000 NA Manuel utilisateur

Timex

Timex W-219 Manuel utilisateur

Timex

Timex W-11 Manuel utilisateur

Timex

Timex 660-095000 Manuel utilisateur

Timex

Timex W-215 Manuel utilisateur

Timex

Timex Marathon Manuel utilisateur

Timex

Timex W-194 Manuel utilisateur

Manuels Montre populaires d'autres marques

Pandora

Pandora WATCH2 Manuel utilisateur

Casio

Casio QW-4343 Manuel utilisateur

Suunto

Suunto X6 Manuel utilisateur

Seiko

Seiko N830 Manuel utilisateur

MotionX

MotionX 365 Manuel utilisateur

Garmin

Garmin VENU SQ 2 Manuel utilisateur

QCY

QCY Watch GTC Manuel utilisateur

Canyon

Canyon Cindy CNE-KW41WP Manuel utilisateur

Esq

Esq Watches Guide d'installation

Crane

Crane AA5-CDSM-3A Manuel utilisateur

DETOMASO

DETOMASO MATERA Manuel utilisateur

Geemarc

Geemarc Watch N Shake Manuel utilisateur

LORUS

LORUS W590 Manuel utilisateur

STENLILLE

STENLILLE Actío Manuel utilisateur

Casio

Casio 5594 Manuel utilisateur

Sinn

Sinn HUNTER'S WATCH 3. Edition Manuel utilisateur

Slazenger

Slazenger SLZ800 Manuel utilisateur

iTOUCH

iTOUCH 3360 Manuel utilisateur