Use ‘Adv’, ‘Mode’ and ‘Prog’ to set the OFF time.
Press ‘Prog’ twice so that the ON time for programme 2 flashes. Scroll through
programme 2 ON, programme 2 OFF, press ‘Prog’ twice, programme 3 ON,
programme 3 OFF, press ‘Prog’ twice, programme 4 ON, programme 4 OFF,
press ‘Prog’ twice, programme 5 ON, programme 5 OFF, press ‘Prog’ twice,
programme 6 ON, programme 6 OFF, adding in times as required.
At any stage, after programming an off time, if ‘Prog’ is pressed once,
there is the option of changing to the next day, and skipping the remaining
ON/OFF times.
Press ‘Prog’ to move to
next programmed time
mode (in example
shown Sa Su).
(The example shown is for 5 + 2 programme, as screen shows Mo Tu We Th Fr)
For the 24hr mode, Mo Tu We Th Fr Sa Su will remain displayed
during programming.
For 7 day different mode, the default will start with Mo, and when
programming is complete for Mo, it will move on to Tu, We, Th, Fr, Sa, Su in turn
until all are programmed.
Use ‘Adv’ or ‘Mode’ to set the time, using ‘Prog’ to change between hours
and minutes.
Press ‘Prog’ to change
to programme 1 OFF time.
