timecode systems UltraSync BLUE Manuel utilisateur
Manual Issue 1.0
For the latest user guide, please visit:
www.support.timecodesystems.com
UltraSync ONE
User Guide
UltraSync ONE User Guide
Copyright Notice - Timecode Systems Limited
All rights reserved. No part of this publication may be reproduced without the
expressed written permission of Timecode Systems Ltd.
Timecode Systems Ltd shall not be liable to the purchaser of this product or third
parties for damages, losses, costs, or expenses incurred by the purchaser or third
parties as a result of accident, misuse or abuse of this product or unauthorised
modifications, repairs, or alterations to this product, or failure to strictly comply
with Timecode Systems Ltd operating and installation instructions.
Contents
Welcome to UltraSync ONE
Chapter 1 UltraSync ONE Overview
UltraSync ONE for Synchronisation 10
Switch UltraSync ONE On and Off 11
Display and Controls 13
OLED 13
Status Indicator LED 14
Up and Down 15
Select 15
Ports 16
DIN 1.0/2.3 to BNC Cables 17
Charging your UltraSync ONE 18
Mounting your UltraSync ONE 19
Technical Specification 20
Chapter 2 Networks and Modes
Master and Slaves 24
How Can I Tell if a Slave is Communicating with a Master? 25
What if a Slave Cannot Find a Master? 26
Multiple Masters in the Same Network 28
RF Network 29
What is an RF Network? 29
BLINK Network 31
What is a BLINK Network? 31
Master TX 33
RF Slave 35
EXT LTC Input 36
EXT LTC Input, Output to RF Slaves 37
EXT LTC Input, Output to Wired Devices 38
Free Running and Jamming 39
Free Running - UltraSync ONE as a Standalone Device 39
Jamming to an External Timecode Source 40
Output via SYNC 42
UltraSync ONE User Guide iii
Chapter 3 Quick Set Up
Preparation - Before you Set Up your UltraSync ONE 44
44
Getting Started - Master TX Mode 45
Getting Started - RF Slave Mode 45
Getting Started - EXT LTC Input 46
Master to RF Slaves and Wired Devices 47
Master to Wired Device Only, No RF Slaves 50
Run UltraSync ONE as an RF Slave 52
How does an RF Slave Synchronise with a Master? 54
Set UltraSync ONE to use LTC as an Input 56
Send Timecode from a Standalone UltraSync ONE 59
Jam UltraSync ONE to a Signal 61
Chapter 4 Configuration Settings
Set the RF Country/Area 64
Set the Timecode Mode 65
Set the RF Channel 68
Set the Timecode for the Master 72
Set the Frame Rate Per Second 73
Set the User Bits 74
Set the SYNC Output 76
Set the LTC Level 78
Change the Status Indicator LED Brightness 79
Change the Screen Brightness 80
Change the Screen Saver Time 81
Flip the Display 82
Button Lock 83
Chapter 5 Status Information
Main Screen 86
Version Number and Serial Number 87
Power and Battery Status 88
Synchronisation Status 89
SYNC Output Status 90
LTC Output Status 91
iv UltraSync ONE User Guide
Chapter 6 BLINK Hub
Remote Settings using BLINK Hub 94
Chapter 7 Warranty and Conformity
Warranty 96
Quality Declarations 97
Use of External Antenna(s) 97
RF Exposure Warning Statement: 97
FCC Warning Statement: 97
Industry Canada Statements: 98
EC Declaration of Conformity 99
Chapter 8 Troubleshooting and FAQs
Troubleshooting 102
UltraSync ONE Slave not Connecting to Master 103
UltraSync ONE Slave is Connecting to the Wrong Master 103
UltraSync ONE not Responding to Select button 103
UltraSync ONE Battery not Charging 104
Restore Factory Settings 105
Reset 106
FAQs 107
Can UltraSync ONE be used as a Master Unit? 107
Can a Master Device use Drop-Frame Timecode? 107
How Long Does it Take for UltraSync ONE to Re-Sync? 107
Chapter 9 Safety and Disposal
Battery Safety and Disposal 110
Battery Safety 110
Disposal and Recycling 110
Index
UltraSync ONE User Guide v
vi UltraSync ONE User Guide
Welcome to UltraSync ONE
Thank you for choosing Timecode Systems' UltraSync ONE as your timecode
synchronisation solution. You have made a great choice. With its compact and
lightweight design, long battery life (at least 25 hours) and ability to run as a
timecode master or slave, UltraSync ONE is one of the most advanced timecode and
synchronisation options on the market.
In this user guide, you will find everything you need to know about using your
UltraSync ONE.
Your Timecode Revolution Starts Here...
UltraSync ONE User Guide 7
8 UltraSync ONE User Guide
In this chapter, you can learn about the screen, buttons, and ports of
your UltraSync ONE, and its technical specifications.
UltraSync ONE for Synchronisation 10
Switch UltraSync ONE On and Off 11
Display and Controls 13
Ports 16
Charging your UltraSync ONE 18
Mounting your UltraSync ONE 19
Technical Specification 20
UltraSync ONE User Guide 9
Overview
Chapter 1
UltraSync ONE Overview
UltraSync ONE for Synchronisation
UltraSync ONE is a highly accurate timecode generator and multichannel digital
timecode transceiver.
You can use your UltraSync ONE as:
la stand-alone device to provide timecode, genlock, and word clock to your
camera or sound mixer/recorder
la timecode master, where it provides timecode to other Timecode Systems
products for synchronisation
la timecode slave, where it receives timecode from a 'master' device and then
provides this timecode to your camera or sound mixer/recorder.
You can learn more about these modes in Networks and Modes on page 23.
Tip: If you use UltraSync ONE with a :pulse, you have free access to the
BLINK Hub app. You can use the app to configure and monitor your
UltraSync ONE. For more details, see Remote Settings using BLINK Hub on
page 94.
10 UltraSync ONE User Guide
Autres manuels pour UltraSync BLUE
1
Table des matières
