Thuraya SatSleeve Manuel utilisateur
ENGLISH
BAHASA INDONESIA
Certification/Compliance/Warranty
Limitation of Liability
DEUTSCH
ESPAÑOL
ITALIANO
РУССКИЙ
FRANÇAIS
한국어
中國語
1
EnBiDeEsFrIt
Pусский
Parts Description
No. Parts Description
1 Power On/Off button
2 Status indicator LED
3 Earpiece
4 Loud speaker
5 Wi-Fi button
6 Charger jack
7 Antenna
8 Microphone for hands-free calling
9 SIM card holder
10 Micro USB jack
11 Adaptor lock
12 Earphone jack
13 Microphone
User Guide | ENGLISH
2
Preparation
The Thuraya unit uses satellite communications which
requires direct line of sight to a Thuraya satellite. To
achieve the best connection, please note the following:
• High buildings, tall trees and mountains may
obstruct the line of sight with the satellite.
• In order to connect to the satellite network, the
satellite unit needs to receive the GPS location
data rst. This may take several minutes if the
product is used in a new location.
• Always keep the antenna fully extended when
using the satellite unit.
Getting Started
Installing the Application
In order to use the satellite unit with your smartphone,
you need to download the Thuraya SatSleeve Hotspot
App for free from the App Store or Google Play and
install the application on your smartphone.
Inserting the SIM Card
A SIM card is required to connect to the Thuraya
satellite network. Make sure to insert the SIM card
before inserting the battery and turning on the
satellite unit.
3
EnBiDeEsFrIt
Pусский
Inserting the Battery
Remove the battery cover by pushing it downward
(1) and sliding it down (2).
Insert the battery from the top end rst. Once the
battery is in place, reinstall the battery cover.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY
AN INCORRECT TYPE. DISPOSE OF USED BATTERIES
ACCORDING TO THE INSTRUCTIONS.
Turning On the satellite unit
Press and hold the power button down for about 2
seconds to power on the unit. The blue LEDs will
blink and you will hear a beeping sound. The unit is
now ready to connect with your smartphone.
To turn the unit off, press and hold the power button
down for about 2 seconds until all of the red LEDs
are ashing and you hear a beeping sound.
User Guide | ENGLISH
4
How to use
To enable satellite mode on your smartphone, you
will need to connect it with the satellite unit via
Wi-Fi:
1On your smartphone go to Settings > Wi-Fi >
On to activate Wi-Fi
2Select e.g. SAT0000000 from the network list
to connect your phone to the satellite unit (the
default password is 12345678).
3Open the SatSleeve Hotspot application.
Overview of Home Screen
Contacts Tab
Messages Tab
More Options
Network Name
Location Information
Battery Status
Call Divert
GmPRS initiated
GmPRS active
Earphone connected
Info Message
SMS Full
Missed Call
SAT
Roaming
Signal Strength
Weak signal. Point
antenna towards satellite
HPA Strength
Receiving GPS-x
In Use
Mute On
Ciphering Off
SMS
Voice Mail
Phone Tab
Home Tab
Making a Call in Satellite Mode
On the Phone tab you can enter a phone number
directly, or select a phone number from your
smartphone contacts.
5
EnBiDeEsFrIt
Pусский
SOS Call without smartphone
The satellite unit allows you to make and receive a
call even if you don’t have the smartphone with you.
The SOS Call button is located between the main
unit and the docking adaptor.
Setting an SOS Number
1Select More at the
bottom of the screen.
2Tap Call > SOS number.
3Enter a phone number
you would like to set as
emergency number.
4Tap Done.
NOTE
If there is no emergency number stored, the SOS
button will route the call to an emergency service
(not available in all countries) as long as a SIM card
is inserted.
User Guide | ENGLISH
6
Sending a Message
1Tap the Messages tab.
2Enter a phone number or select the phone
number from your contacts.
3Enter the message.
4Tap Send.
Managing Contacts
When using the Thuraya SatSleeve Hotspot
application, you have access to all of your contacts
on your smartphone. If you create a new contact in
the App the contact will be saved on your phone.
Creating a Contact
1Tap Contacts at the bottom of the screen.
2Tap +.
3Enter the related information and tap Done.
7
EnBiDeEsFrIt
Pусский
How to Use Satellite Data on your
smartphone
You can use emails, instant messaging, social
media and smartphone apps over satellite on your
smartphone by switching on Satellite Data on the
SatSleeve Hotspot App.
1Tap More.
2Tap Satellite Data
3Tap On to activate satellite data
4 If the MAC address eld is empty, go to the
eld and tap My MAC address. Alternatively,
if you want to use the satellite data connection
on a device other than your smartphone, you
can choose the radio button ‘Other device’ and
manually ll in the MAC address of that device.
5You are now ready to use data in satellite mode.
User Guide | ENGLISH
8
Settings
Tools
You can activate satellite data and change SSID,
password and Wi-Fi network security method.
The GPS function allows you to view your current
coordinates and send them by SMS.
Phone Settings
Adjust the settings for Calls, Messages, and
Sounds.
Network Settings
Select network options and network priorities.
Advanced
You can activate and change PIN codes, Barring
code and set a Closed User Group. You can check
the device information including IMEI Number, App
version and rmware version. Factory reset will
restore the default settings.
Charging the Battery
Connect the charger to the bottom left side of the
satellite unit.
9
EnBiDeEsFrIt
Pусский
Optional: Connecting to a PC or
laptop
You can also use Internet and email over satellite on
your laptop or PC by connecting to it with the USB
data cable.
Installing the USB driver
1 Download the USB driver from the Thuraya
website (www.thuraya.com/support).
2 Install the driver on your PC or laptop.
3 Turn on the satellite unit and connect it to the PC
or laptop with the USB cable.
Installing the modem on PC/laptop
1 Select Start > Settings > Control Panel >
System > Hardware > Device Manager.
2 Check the USB serial port of the SatSleeve (e.g.
COM40).
3 Select Start > Settings > Control Panel >
Phone and Modem.
4 Select the Modems tab and press Add.
5 Check the box “Don’t detect my modem; I will
select it from a list.” and press Next.
6 Select and press Standard 56000 bps Modem
and press Next.
7 Select the USB serial port that you previously
checked in step 2 and press Next.
8 When the modem installation is completed,
press Next.
Creating a dial-up connection
1 Select Start > Settings > Control Panel >
Network and Sharing Center.
2 Select and press Set up a new connection or
network.
3 Select and press Set up dial-up connection
and then Next.
4 Enter *99# on the Dial-up phone number
eld. You do not need to enter user name and
password.
5 Input connection name and press Connect.
6 Use the Internet with the newly created dial-up
connection.
Autres manuels pour SatSleeve
4
Table des matières
Autres manuels Thuraya Routeur sans fil
