Thumpstar TSE 12 E3-BASE Manuel utilisateur

ELECTRIC BALANCER

THUMPSTAR

OWNER’S

MANUAL

Read and understand this entire manual before riding. Thumpstar

Motorbikes strongly recommend having this machine assembled

by a skilled mechanic. Assembly should include, but is not

limited to checking over the entire bike including

the engine.

VIN & ENGINE NUMBER

NOTE:

Manual illustrations are for demonstration purposes only. Illustrations

may not reflect exact appearance of actual product. Specifications

subjected to change without notice.

www.thumpstar.com.au

www.thumpstar.co.nz

/thumpstarmoto

/genuinethumpstar

MANUAL # 3941

Owner’s Manual

THUMPSTAR BALANCER, FOR AGES 3-12

IMPORTANT: READ MANUAL CAREFULLY BEFORE

OPERATING

We care about the safety and comfort of our customers. is manual will

guide you through proper techniques in operating your THUMPSTAR

balancer.

For any additional information, please visit:

www.umpstarUSA.com

NOTE: Manual illustrations are for demonstration purposes only. Illustrations may not

reect the exact appearance of the actual product. Specications are subject to change

without notice. Please have your product Serial Number (S/N) and a copy of your receipt

before contacting us for warranty assistance and/or replacement parts.

WARNING: Riding a TSE balancer does present potential risks and caution is required.

Like any riding product, a TSE balancer has inherent hazards associated with its use (for

example, falling o or riding it into a hazardous situation). When riding the TSE balancer,

it is possible to lose control or otherwise get into dangerous situations. Both children

and the adults responsible for supervising them, must recognize that if such hazards

occur, a rider can be seriously injured or die even when using safety equipment and other

precautions. RIDE AT YOUR OWN RISK.

ese pages give an overview of the contents of your owner’s manual

Introduction ...........................................................................................

A Few Words About Safety ....................................................................

Electric Balancer Pre-Riding Safety ......................................................

Before Riding ..........................................................................................

Safety Equipment ...................................................................................

Message To Riders ..................................................................................

Loading, Accessories & Modications ................................................

Safety Labels .........................................................................................

TSE Bike Components ..........................................................................

Acceptable Riding Practices & Conditions ..........................................

Powered and Rotating Parts Warning ....................................................

Proper Riding Attire ..............................................................................

Starting Process ....................................................................................

Safely Approaching & Remounting the Bike .......................................

Loading and Un-loading .......................................................................

Check and Maintain .............................................................................

Pre-Ride Inspection & Checklist ..........................................................

rottle Components / Features ..........................................................

rottle Operation ...............................................................................

Changing Power Modes ........................................................................

Activate Program Selection ...................................................................

Select Program .....................................................................................

Exit Program Selection .........................................................................

Led Information ..................................................................................

Repair & Maintenance .........................................................................

Test Brake ............................................................................................

Adjust Brake ........................................................................................

Replace Tire and Tube ..........................................................................

Battery .................................................................................................

Troubleshooting Guide ........................................................................

Specications ........................................................................................

Spare Part Catalogue ...........................................................................

Parts Finder .........................................................................................

Warranty ..............................................................................................

Disclaimer ............................................................................................

Contents

Introduction

Congratulations on the purchase of your new TSE Balancer! With

proper assembly and maintenance, it will oer you years of enjoyable riding!

IMPORTANT:

Carefully read and follow this manual (and any other materials included

with this bike) before riding. Please retain this manual for future use. If this

bike was purchased for a child, it is the responsibility of the purchaser to

verify the bike has been properly assembled, and that the user has been

properly trained and instructed in use of the bike.

is manual is provided to assist you and is not intended to be a

comprehensive manual covering all aspects of maintaining and repairing

your bicycle. e bicycle you have purchased is a complex piece of

equipment that must be properly assembled and maintained in order to be

ridden safely. You must have it assembled and maintained by one of our

authorized dealers.

e user or consumer assumes all risk of personal injuries, damage, or

failure of the bicycle or system and all other losses or damages to themselves

and others and to any property arising as a result of using the bicycle. (need

to ensure that you hold no liability for injury to the user or damage to

property)

DO NOT DISASSEMBLE, MODIFY OR REPLACE ELECTRICAL PARTS.

If you need to change any parts, please consult one of our authorized

dealers or contact customer service for additional help.

NOTE: YOUR INSURANCE POLICIES MAY NOT PROVIDE

COVERAGE FOR ACCIDENTS INVOLVING THE USE OF THIS

BICYCLE. TO DETERMINE IF COVERAGE IS PROVIDED YOU

SHOULD CONTACT YOUR INSURANCE COMPANY OR AGENT.

Introduction

DANGER: Failure to properly assemble and maintain your bicycle could

result in serious injury or death to the rider.

is manual contains important safety, performance and service

information. e purpose of this Owner’s Manual is to help you use your

bike safely in the manner it is intended and allow you to enjoy the benets

it oers for many years to come. Please read it before you take the rst ride

on your new bicycle, and keep it for reference. If you have any questions

or do not understand something, take responsibility for your safety and

contact umpstar customer service at 330-298-5107 or

support@thumpstarusa.com

ALWAYS WEAR A PROPERLY FITTED HELMET WHEN YOU RIDE YOUR

BICYCLE. DO NOT RIDE AT NIGHT. AVOID RIDING IN WET CONDITIONS.

A Few Words About Safety

Your safety, and the safety of others, is very important and operating

this electric balancer safely is an important responsibility.

WARNING

Always use an

approved helmet &

protective gear

Never use on

public roads

Never carry

passengers

is section presents some of the most important information and

recommendations to help you ride your electric balancer safely.

Please take a few moments to read these pages. is section also includes

a special message for parents and location information for the safety

labels on your electric balancer.

You could be SERIOUSLY HURT if you don’t

follow instructions.

You could be HURT if you don’t follow

instructions.

Electric Balancer Pre-Riding Safety

CAUTION: For your safety you must carefully read this manual and

follow its instructions. Your bicycle may come with additional instruction

sheets that cover features unique to your bike. Please ensure that you read

and become familiar with their contents and retain them with this manual

for future reference. Remember bicycles, in most areas, are subject to the

same laws, rules, and regulations as motor vehicles.

Always wear a CPSC approved helmet when riding your bike.

Learn and follow local and state trac use laws.

Any major service or adjustments on your bike not covered in this manual

should be carried out by a professional bicycle mechanic. If you wish to

make adjustments yourself, this manual contains important tips on how to

do it.

CAUTION: Any adjustments you make are entirely at your own risk. Do

NOT use your bike for freestyle and stunt riding, jumping or competitive

events. Do not ride your bike when any part is damaged or not working

properly. You must, for your safety and the safety of other users, consult a

professional bicycle mechanic for any questions on repairs or maintenance.

WARNING: As with all mechanical components, the bicycle is subjected

to wear and high stresses. Dierent materials and components react to

wear or stress fatigue in dierent ways. As your bicycle ages, you should

inspect it more frequently to look for deformed, cracked, bent, or loose

components. Such conditions may lead to sudden failure. is may

possibly cause injuries to the rider. If something is cracked or broken,

do not ride until repairs have been made.

Electric Balancer Pre-Riding Safety

BEFORE RIDING

1. WARNING - ON AND OFF ROAD CONDITIONS: e condition of the

riding surface is very important to your safety. If the surface is wet, or has

sand, leaves, small rocks or other loose debris on the surface where you

plan to ride, carefully decrease the speed of the bicycle and ride with extra

caution. It will take a longer time and more distance to stop. Apply the

brakes sooner and with less force. Always apply the rear brake rst allowing

time and distance for it to take eect. en follow by cautiously applying the

front brake, in order to maintain control of the bicycle. Rapid front brake

application rst may cause a front pitch over or fall. Learn to use your brakes

properly under controlled conditions until you learn proper braking under

all road conditions.

2. NOTICE: State and federal regulations require a full set of reectors.

Some state and local laws may require that your bike be equipped

with a warning device, such as a horn or bell and most states require a

light. e manufacturer and many legal authorities DO NOT approve or

encourage riding at night. Vision is quite limited at dawn, dusk and at night

for bike riders, motorists and by-standers. If you must ride at night, take

extra precautions, use front and rear lights, wear ashers on your arms,

wear light-colored clothing, and plan your route to ride in well lighted areas

avoiding heavy trac areas.

3. NOTE: Always wear shoes when riding a bicycle and avoid loose

tting clothes. Wear a cu band or trouser clip to keep pants or other loose

clothing from getting caught in the chain wheel. Long sleeves, long pants,

gloves, eye protection, a CPSC approved helmet, elbow and knee pads are

recommended. Helmet use is required by law in many states and is always a

good idea for your safety.

Electric Balancer Pre-Riding Safety

4. CAUTION: WET WEATHER WARNING: Check your brakes frequently.

e ability to stop is critical to your safety. Roads are slippery in wet weather

so avoid sharp turns and allow more distance for stopping. Brakes become

less ecient when wet. Leaves, loose gravel and other debris on the road

can also lengthen stopping distance. If at all possible, do not ride in wet

weather. Vision and control are impaired, creating a greater risk of accidents

and injury.

5. CAUTION: A bicycle rider’s best defense against accidents is to be alert

to road conditions and trac in the area. Do not wear anything that restricts

your vision or your hearing.

6. When riding, ALWAYS WEAR A APPROVED BIKE HELMET. It may save

your life.

7. Obey all trac regulations. Most trac regulations apply to bike riders as

well as automobile operators. Observe all state and local trac regulations,

signs and signals. Check with your local police station on bicycle licensing

and inspection, and where it is legal to ride your bike.

8. ON AND OFF ROAD OPERATION: Avoid the following road hazards: drain

grates, pot holes, ruts, so road edges, gravel, leaves (especially when they

are wet), uneven pavement, railroad crossings, manhole covers, curbs, speed

bumps, puddles, and debris as all have an eect on your riding and may

result in loss of control. Adjust your speed and the way you use your brakes

if you must ride in such areas.

9. If any components become loose while riding, (STOP!!) immediately and

tighten, or bring to a mechanic for repair.

Electric Balancer Pre-Riding Safety

TO AVOID INJURY, THIS PRODUCT MUST BE PROPERLY ASSEMBLED

BEFORE USE. WE STRONGLY RECOMMEND THAT YOU REVIEW THE

COMPLETE ASSEMBLY GUIDE AND PERFORM CHECKS SPECIFIED IN

THE OWNER’S MANUAL BEFORE RIDING.

Just a minute spent before each ride can signicantly improve your safety

and the enjoyment of your ride. So, EACH TIME before you ride make a

habit of performing the following safety checks:

• Stand in front of the bicycle facing rearward and hold the front wheel

securely between your legs.Try to twist the handlebar and verify that they do

not move. en pull the handlebars up, trying to li the bike. ere should

be no movement.

• Try to push the front wheel from side to side and conrm that it feels tight

and will not wobble. Li the front wheel up by the handlebars and strike the

wheel downward with the heel of your hand to conrm that it is securely

attached to the wheel. Spin the front wheel and conrm that it does not

wobble or contact the fork or brake pads.

• Try to li/push down on and twist the seat to conrm it is tight.

• Look at the connection of the pedals to the crank arm. You should not see

pedal screw threads and the pedal should feel rm and be parallel to the

ground.

• Apply your brake(s) and make sure they feel rm to the touch, and then

spin the wheel(s). Apply the brakes. e brakes should stop the wheel(s).

• Check to be sure that the fenders and accessories (if equipped) are rmly

attached and will not contact any moving parts. Make sure all reectors are

in position and not broken.

Now, put on your BICYCLE SAFETY HELMET and enjoy your ride. Your

safety is well worth just a minute. Also, be sure to read and follow the warn-

ings and instructions in this manual

Ce manuel convient aux modèles suivants

Table des matières

Manuels Scooter populaires d'autres marques

TEKTRO

TEKTRO CHEETAH Manuel utilisateur

Douglas

Douglas Vespa Sprint Guide d'installation

PLAYTIVE

PLAYTIVE AS-2448 Manuel utilisateur

Ebinger

Ebinger DONKEY XL Manuel utilisateur

Flyer

Flyer Mountain Guide de l'utilisateur

BackCountry eBikes

BackCountry eBikes Storm Manuel utilisateur

equipmed

equipmed FreeRoam II Manuel utilisateur

Yoto

Yoto Lion Manuel utilisateur

WESTHILL BIKES

WESTHILL BIKES LINK Manuel utilisateur

BAnff

BAnff eProdigy series Manuel utilisateur

Winther

Winther 475 Manuel utilisateur

Jetson

Jetson JBZL17 Manuel utilisateur

First Choice Mobility

First Choice Mobility Roma Medical Corella S741 Manuel utilisateur

Carrera

Carrera impel Manuel utilisateur

Afikim

Afikim Superlight SL-3 Manuel utilisateur

CareCo

CareCo ZOOM Manuel utilisateur

Douglas

Douglas Vespa G.S. Manuel utilisateur

Gazelle

Gazelle with BOSCH System Manuel utilisateur