6
This document is the property of THRILL INTERNATIONAL and may not be reproduced without the company’s prior consent.
• Do not use the appliance if the power supply unit or power cable are damaged in any way or
if the machine itself has been previously knocked over or dropped.
• To avoid risk, do not modify or make any changes to the product. Do not replace the
connection cable yourself.
• In case of the need for repair, do not attempt such repairs yourself. Only have your appliance
repaired by our service centre or laboratories authorized by Thrill International.
• In the event that liquids penetrate the appliance casing or foreign objects fall into the
appliance, immediately disconnect the plug from the electricity supply.
Have the appliance safety checked before operating it.
The appliance casing, power cable, power adapter, and plug must not be immersed in water
or other liquids.
However, in the event that the appliance falls into water or other liquid, immediately remove
the plug from the electricity supply. Under no circumstances touch or attempt to remove
the appliance until you have done so. Do not attempt to use the appliance until a specialist
laboratory has checked it.
Do not touch the power adapter or cable with wet hands.
Connect the plug to a properly tted and easily accessible power socket, whose voltage
corresponds to the specications provided on the rating plate. The power socket must remain
easily accessible once the appliance has been connected.
Make sure that the power cable is not susceptible to damage from sharp edges or hot spots.
The appliance is not completely disconnected even after it has been switched o and therefore
to ensure it is completely isolated from the power supply, remove the plug.
When positioning the appliance, ensure the power cable is not kinked or crushed.
To remove the plug from the wall socket, always pull the plug and never the cable.
The socket outlet must be protected by a RCD with IΔn ≤ 30 mA instantaneous trip.
If in doubt, consult a qualied electrical installer.
- HYGIENE
The appliance must be cleaned regularly in order to prevent the growth of bacteria.
Do not place dirty glasses containing liquid residues on the grille.
Avoid the build-up of liquid in the drip tray.
While this appliance reduces the build-up of bacteria in glassware and plastic receptacles, it
is not a substitute for proper cleaning and sanitization, which must be performed using a
dishwasher.
- USE
Never look directly into the jet stream or directly expose it to parts of the body (face, hands,
arms, etc.), in order to avoid the risk of frost burn.
Avoid placing your hands inside the basin during operation or immediately after appliance use.
Before using the appliance, ensure it is completely dry, as the presence of water in the tank
can lead to splashing and potential frostbite; if liquids have accumulated in the drip tray, dry
it thoroughly. There is a risk that protective treatments and nishes applied to work surfaces
may cause the rubber feet tted to the appliance to corrode or become stuck to the surface;
to ensure this does not occur, place a non-slip base or mat under the machine. Do not use
detergents or acids for cleaning surfaces; only use products specically suitable for cleaning
stainless steel. Clean all exterior surfaces of the machine by hand; the nozzle, grille and
accompanying parts can be washed in a dishwasher.
