THORLABS PM100USB Manuel utilisateur

Quick Reference

Thorlabs Instrumentation

Optical Power and Energy Meter

PM100USB

2009

Safety Attention 

All statements regarding safety of operation and technical data in

the instruction manual will only apply when the unit is operated

corectly.

The power meter PM100D must not be operated in explosion

endangered environments!

Sensor, photodiode and control inputs and outputs must only be

connected with duly shielded connection cables.

Only with written consent from Thorlabs may changes to single

components be carried out or components not supplied by

Thorlabs be used.

Do not remove covers!

Refer servicing to qualified personal!

1 General Information and Physical Overview

The PM100USB Optical Power and Energy Meter is designed to measure the

optical power of laser light or other monochromatic or near monochromatic light

sources and the energy of pulsed light sources with an external PC that is

connected via USB interface.

The PM100USB is compatible to all Thorlabs “C-Type” Photodiode, Thermal,

Pyroelectric sensors, and custom Photodiode, Thermal and Pyroelectric detectors.

The provided software, including drivers and applications for LabVIEW and C

makes it easy to integrate the instrument in test and measurement systems.

All software and commands are compatible and interchangeable with the PM100D

handheld power and energy meter and with the PM100A handheld optical power

meter.

FrontView RearView

Power / Energy -

Sensor Connecto

USB

Connecto

USB Device is

read

to o

erate

Sensor detected

and ready for

eration

2 Getting Started

2.1 Unpacking

Inspect the shipping container for damage.

If the shipping container seems to be damaged, keep it until you have inspected

the contents and you have inspected the PM100USB mechanically and electrically.

Verify that you have received the following items.

1. PM100USB power/energy meter

2. USB cable, type ‘A’ to ‘mini-B’

3. Quick-start guide

4. USB memory stick with instrument drivers, user application and operation

manual

5. Certificate of Calibration

2.2 Installation and Preparation

1.For proper installing the PM100USB it requires a NI-VISA runtime version on

the PC (available on the National Instruments website www.ni.com or from the

data carrier that comes with the instrument. Allow installing and follow the

dialog instructions.

2.Install the PM100 Utility software from the data carrier. You can chose a

convenient auto-run function of the data carrier by browsing to the folder

‘Autorun’ and executing ‘autorun.exe’.

3.Interlink the USB cable with its male type ‘A’ connector at the PC side and the

‘Mini B’ type connector on the instrument side. The PM100USB gets its opera-

tion power from the PC via the USB cable. When connecting the PM100USB

first time to a PC, sequent a new hardware ‘PM100USB test and measurement

device’ and a ‘DFU device’ will be recognized; please allow installing. After

successful installation the ‘USB LINK’ LED in the rear panel lights up and the

unit is ready to operate.

4.Connect a suitable power or energy sensor. The sensors are ‘hot swappable’

and have a self-fixing mechanism. To plug or unplug a sensor slightly press

from both sides on the pins in the connector housing. After recognizing a valid

sensor and downloading its information and calibration data the ‘SENSOR’ LED

in the rear panel lights up.

5.Run the PM100 Utility software and confirm the connected PM100USB.

For more information, please refer to the detailed user manual that is provided on

the data carrier that shipped with the PM100USB.

3 Addresses

Our Company is represented by several distributors and sales offices throughout

the world.

Europe

Thorlabs GmbH

Hans-Boeckler-Str. 6

D-85221 Dachau

Germany

Sales and Support

Phone: +49 (0) 8131 / 5956-0

Fax: +49 (0) 8131 / 5956-99

Email: [email protected]

Web: www.thorlabs.com

USA

Thorlabs, Inc.

435 Route 206 North

Newton, NJ 07860

USA

Sales and Support

Phone: 1-973-579-7227

Fax: 1-973-300-3600

Email: [email protected]

Web: www.thorlabs.com

Japan

Thorlabs, Inc.

Higashi Ikebukuro Q Building 1st floor

2-23-2, Higashi Ikebukuro, Toshimaku

Tokyo 170-0013

Japan

Sales and Support

Phone: +81-3-5979-8889

Fax: +81-3-5979-7285

Email: [email protected]

Web: www.thorlabs.jp

Please call our hotlines, send an Email to ask for your nearest distributor or just

visit our homepage

http://www.thorlabs.com

19570-D02 Rev B M0009-510-614

Autres manuels pour PM100USB

Table des matières

Autres manuels THORLABS Instrument de mesure

THORLABS

THORLABS GSL Series Manuel utilisateur

THORLABS

THORLABS K10CR1 Manuel utilisateur

THORLABS

THORLABS PM200 Manuel utilisateur

THORLABS

THORLABS CVH100-COL Manuel utilisateur

THORLABS

THORLABS TPZ001 Manuel utilisateur

THORLABS

THORLABS ERM100 Manuel utilisateur

THORLABS

THORLABS GVS001 Manuel utilisateur

THORLABS

THORLABS NPL52B Manuel utilisateur

THORLABS

THORLABS LTS Series Manuel utilisateur

THORLABS

THORLABS LDM21 Manuel utilisateur

THORLABS

THORLABS M2MS-BC106N Series Manuel utilisateur

THORLABS

THORLABS PM160 Manuel utilisateur

THORLABS

THORLABS TXP5004 Manuel utilisateur

THORLABS

THORLABS SA200 Series Manuel utilisateur

THORLABS

THORLABS TLS001-635 Manuel utilisateur

THORLABS

THORLABS NR360S Manuel utilisateur

THORLABS

THORLABS HRS015 Manuel utilisateur

THORLABS

THORLABS LTS150 Manuel utilisateur

THORLABS

THORLABS CCS Series Manuel utilisateur

THORLABS

THORLABS HRS015B Manuel utilisateur

THORLABS

THORLABS PDXR1 Manuel utilisateur

THORLABS

THORLABS vytran PTR406 Manuel utilisateur

THORLABS

THORLABS PM320E Manuel utilisateur

THORLABS

THORLABS CCS Series Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur