THORLABS PM10-3 Manuel utilisateur

Optical Power Meter Interfaces

2021

PM103, PM103A, PM103U

Operation Manual

Version:

Date: 1.0

15-Mar-2021

Foreword

Contents

1 General Information 1

21.1 PM103x Model Comparison 31.2 Ordering Codes and Accessories 41.3 Requirements

2 Getting Started 5

52.1 Parts List

3 Operating Instructions 6

63.1 How To 63.1.1 PM103x Setup 63.1.2 Connecting a Power Sensor 83.2 Power Meter Interface Features 83.2.1 PM103x Sensor Connector 93.2.2 PM103 103.2.3 PM103A 103.2.4 PM103U 113.2.5 USB Operation 113.2.6 RS232 Operation 123.2.7 UART Operation 123.2.8 Reset Button 123.2.9 Baud Rate 123.2.10 Non-Volatile Memory 123.2.11 Digital I/O Ports 133.2.12 Analog Output 133.2.13 Autonomous Operation to Analog Output 143.2.14 NTC Input 143.2.15 Power Supply 143.3 Software 153.3.1 Software Requirements 153.3.2 PM103x Specific Software Functions 153.3.2.1 PM103 Specific Software Functions 153.3.2.2 PM103A Specific Software Functions 153.3.3 Sensor Calibration 153.3.4 Frimware Update

4 Maintenance and Service 16

5 Appendix 17

175.1 Technical Data 205.2 Pin Assignment Output Connector

205.3 Pin Assignment of the Sensor Connector 225.4 Safety 235.5 Return of Devices 235.6 Manufacturer Address 245.7 Certifications and Compliances 255.8 Warranty 255.9 Copyright and Exclusion of Liability 265.10Thorlabs Worldwide Contacts - WEEE Policy

We aim to develop and produce the best solutions for your

applications in the field of optical measurement techniques. To help

us to live up to your expectations and constantly improve our

products, we need your ideas and suggestions. We and our

international partners are looking forward to hearing from you.

Thorlabs GmbH

Warning

Sections marked by this symbol explain dangers that might result in

personal injury or death. Always read the associated information

carefully before performing the indicated procedure.

Please read this advice carefully!

This manual also contains "NOTES" and "HINTS" written in this form.

Attention

Paragraphs preceded by this symbol explain hazards that could

damage the instrument and the connected equipment or may cause

loss of data.

Note

PM103x

Page 1 MTN023788_D02

1 General Information

The PM103x Optical Power and Energy Meter interfaces measure the optical power of laser

light or other monochromatic or near monochromatic light detected by a connected sensor. Its

high repetition rate with up to 80kHz supports even fast pyroelectric sensors. The PM103x

power meter interfaces are compatible with all Thorlabs “C-Series” Photodiodes, Pyroelectric

sensors, and respective custom sensors.

To flexibly integrate the PM103x into a setup, the PM103x models offer different electronic in-

terfaces for instrument control and output:

·PM103: USB port and DA-15 connector

·PM103A: USB port (Input and Output) and SMA analog interface (Output only)

·PM103U: USB port only

The USB port features a fixture for secure connection of the cable to the housing.

For the PM103U and PM103A power meters, instrument control and power supply are facilita-

ted via the USB port. The PM103 can alternatively use the DA-15 interface for instrument con-

trol and to connect a power supply. For more information on the special features of the PM103x

models, please see the table PM103x Model Comparison below.

For instrument control and data analysis through a connected PC, tablet or laptop, Thorlabs of-

fers the Optical Power Monitor (OPM) software. Instead of the OPM software, the user can

write custom made software. For this, information on driver and SCPI commands are provided

in the manual WriteYourOwnApplication (WYOA) for the PM103x.

In summary, the PM103x models give the customer the choice of different interfaces, as well as

provide a supplied control and analysis software and the option to use custom made software.

Further, the PM103 can even be controlled via an external micro-controller, supplied by the

customer. These features allow for maximum flexibility to integrate the instrument in test and

measurement systems and a wide range of industrial and scientific applications in manufactu-

ring, quality control, quality assurance, and R&D for stationary and field use.

Attention

Please find all safety information and warnings concerning this product in the chapter Safety

in the Appendix.

1 General Information

Rev: 1.0, 15-Mar-2021 Page 2

1.1 PM103x Model Comparison

PM103

PM103A

PM103U

USB Connector and Operation

SMA Connector

DA-15 Universal Connector

RS232 Operation

Analog Output Operation

Autonomous Operation to

Analog Output

Real Analog Output

Sensitivity Configurable

Analog Output

UART Operation

2 Digital I/O Ports

1 Digital I/O Ports

NTC Input

Power Supply +5V to +36V

9 10 10

PM103x

Page 3 MTN023788_D02

1.2 Ordering Codes and Accessories

PM103

Power and Energy Meter Interface with DA-15 Connector; USB, RS232, or UART

Operation. Digital or Analog Signal Output; Two Digital I/O Ports; NTC Input; USB

Interface for Control and Power Supply.

PM103A

Power and Energy Meter Interface with SMA Connectors for two Analog Outputs

and one Digital I/O Port; USB Interface for Control and Power Supply.

PM103U

Power and Energy Meter Interface with USB Connector and USB Operation for

Control, Read Out, and Power Supply.

Included Accessories:

The PM103x Power and Energy Meters include certain cables. Further cables are recommen-

ded in Optional Accessories .

PM103: DA-15 Connector and Connector Housing

USB Cable, Type A to Mini B, with locking screw, 1.5m

PM103A: USB Cable, Type A to Mini B, with locking screw, 1.5m

PM103U: USB Cable, Type A to Mini B, with locking screw, 1.5m

Optional Accessories:

To run the PM103x power and energy meter, additional cables or mounting devices may be re-

quired.

Cables

·PM103: Cable to attach to the provided DA-15 connector housing.

·PM103A: SMA cable: please provide a cable with a SMA connector with your PM103A.

Thorlabs offers a variety of SMA connector cables.

Mounting

·Horizontal Mounting Clamp (ECM225) to mount the PM103x onto a post.

·Vertical Mounting Clamp (ECM100) to mount the narrow side of the PM103x onto a post.

·Double Sided Horizontal Mounting Clamp (EPS225) to securely mount two devices on top of

each other.

Please visit our homepage http://www.thorlabs.com for various accessories like power and en-

ergy sensors, fiber adapters, posts and post-holders.

1 General Information

Rev: 1.0, 15-Mar-2021 Page 4

1.3 Requirements

Hardware Requirements

PM103: Please provide an appropriate cable to be attached to the DA-15 connector.

PM103A: Please provide appropriate cables to connect to the SMA ports.

Software Requirements

All models of the PM103x can be run with the Thorlabs' OPM software. Please see the require-

ments for the OPM on the website.

Sensor Requirements

Thorlabs C-Series Sensors

The PM103x supports all Thorlabs C-Series photodiode and pyroelectric sensors. The C-Series

can be easily identified by the red connector-housing of the DE-9 connector, compared to older

versions of Thorlabs power sensors.

Please refer to the chapter Connecting a Power Sensor on how to use older Thorlabs

sensors or custom sensors.

PM103x

Page 5 MTN023788_D02

2 Getting Started

Please inspect the shipping container for damage. Please do not cut through the cardboard.

You might need the box for storage or for returns.

If the shipping container seems to be damaged, inspect the contents for completeness and test

the PM103x mechanically and electrically. Keep the container for storage or in order to return

the product in case of future problems.

Verify that you have received the following items within the package:

2.1 Parts List

1. PM103x Optical Power and Energy Meter Interface

2. USB Cable, Type A to Mini B, with Locking Screw, 1.5 m

3. PM103: DA-15 Connector and Connector Housing

4. Quick Reference

5. Certificate of Calibration

Autres manuels pour PM10-3

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels THORLABS Instrument de mesure

THORLABS

THORLABS LTS Series Manuel utilisateur

THORLABS

THORLABS PM160 Manuel utilisateur

THORLABS

THORLABS KSG101 Manuel utilisateur

THORLABS

THORLABS S1 Series Manuel utilisateur

THORLABS

THORLABS S1FC635 Manuel utilisateur

THORLABS

THORLABS HNL020R Manuel utilisateur

THORLABS

THORLABS HTPS Manuel utilisateur

THORLABS

THORLABS Redstone OSA305 Manuel utilisateur

THORLABS

THORLABS HRS015 Manuel utilisateur

THORLABS

THORLABS SL1310V1 Series Manuel utilisateur

THORLABS

THORLABS S2011 Manuel utilisateur

THORLABS

THORLABS CCS Series Manuel utilisateur

THORLABS

THORLABS HNLS008R Manuel utilisateur

THORLABS

THORLABS LDM21 Manuel utilisateur

THORLABS

THORLABS ERM100 Manuel utilisateur

THORLABS

THORLABS Redstone OSA305 Manuel utilisateur

THORLABS

THORLABS Blueline Series Manuel utilisateur

THORLABS

THORLABS VSD500 Manuel utilisateur

THORLABS

THORLABS PM300 Manuel utilisateur

THORLABS

THORLABS NST50 Manuel utilisateur

THORLABS

THORLABS MCLS Series Manuel utilisateur

THORLABS

THORLABS CCS Series Manuel utilisateur

THORLABS

THORLABS SA200 Series Manuel utilisateur

THORLABS

THORLABS PM5020 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur