THOMSON RT304 Manuel utilisateur
Main Connections (For UK only)
CAUTION:
For UK Only
CONNECT THE MAIN LEAD INTO AC MAINS
POWER SOCKET
POWER SUPPLY 230V.
Note: The mains lead of the set is fitted with a
moulded plug. If the mains socket are not
compatible or if for any reason the plug is
removed please follow the directions below. The
moulded plug cannot be rewired and if removed
must be disposed of safely.
DO NOT under any circumstances plug the severed
plug into any mains socket as this could result in
electric shock.
Important: If the plug is removed, rewire the
new plug as follow:
The wires in the mains plug are coloured in
accordance to the following code:
BLUE = NEUTRAL & BROWN = LIVE
BLUE BROWN
If the colours of the wires in the mains lead of
this apparatus may not correspond with the
coloured markings identifying the terminals in
your plug, proceed as follows:
BLUE wire to the terminal coded N (Neutral) or
coloured black.
BROWN wire to the terminal coded L (Live) or
coloured red.
DO NOT make any connection to
the terminal in the plug which is
marked by the letter E or by the
earth symbol or coloured green
or green and yellow.
A fused plug must be fitted
with a 3A fuse approved by
ASTA or BS1362 and fuse
covers must be always be
securely replaced. If your set
does not work, the fuse may
be blown.
MAINS CONNECTIONS:
(For UK, see inside front cover)
MAINS OUTLET POWER SUPPLY: 230V ~50Hz
Note:
Power is fed to the unit even when it is not functioning. To cut the
power supply off, the power cable must be unplugged.
RT304/464 EN 2/11/03, 3:51 PM1
1
EN
Safety Information
Do not place the system near wet areas such as
bathrooms and pool side.
Do not expose this appliance to rain or moisture
Avoid storing the system at humid places or near
abnormally heated areas.
Power is continuously supplied to the system. To
disconnect power completely, unplug the power
cord from the power outlet.
Do not expose this appliance to dripping and
splashing.
WARNING:
TO PREVENTFIRE
OR ELECTRICAL
SHOCKHAZARD,
DO NOTEXPOSETHIS PRODUCT
TO RAIN OR MOISTURE.
SEE MARKING ON BOTTOM / BACK OF PRODUCT
CAUTION
RISKOFELECTRICSHOCK
DONOTOPEN
THE EXCLAMATION
POINT WITHIN THE
TRIANGLE IS A
WARNING SIGN
ALERTING YOU OF
IMPORTANT
INSTRUCTIONS
ACCOMPANYING
THE PRODUCT.
THE LIGHTNING
FLASH AND ARROW-
HEAD WITHIN THE
TRIANGLE IS A
WARNING SIGN
ALERTING YOU OF
"DANGEROUS
VOLTAGE" INSIDE
THE PRODUCT.
CAUTION: TO REDUCE THE
RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER
(OR BACK). NO USER-
SERVICEABLE PARTS IN-
SIDE. REFER SERVICING
TO QUALIFIED SERVICE
PERSONNEL.
TECHNICAL SPECIFICATIONS:
Power supply
AC 230V ~50Hz
6V 4 X LR14 / R14 / “C” size
Power consumption: 7W
Please respect the environment. Before
throwing any batteries away, consult your
distributor who may be able to take them
back for specific recycling.
RT304/464 EN 2/11/03, 3:51 PM2
2
EN
Operating the Radio
3 BAND PORTABLERADIO
RT304
Tuning the Stations
1. Slide RADIO button (located on the top
of the radio) to ON position to turn on
the radio.
2. Slide the RADIO BAND button to
switch to the desired broadcast band.
(FM/MW/LW for RT304, FM/SW/MW/LW
for RT464.)
3. Turn TUNING knob to select a station.
4. Adjust the volume level by the VOL-
UME knob.
5. You may lengthen the antenna located
at the top of the unit for better recep-
tion of FM/SW stations; for MW/LW sta-
tions, you may try rotating the antenna
to get better reception.
6. Slide RADIO button to OFF position to
turn off the radio.
RT464
Adjusting the tone level
1. Slide TONE CONTROL (located on the
top of the radio) to turn on / off the
tone.
Connecting the phones
You can use headphones to listen to radio
by inserting the headphone into the
PHONES plug located at the back of the
unit.
MW
LW
RADIO
MW
LW
RADIO
SW
4 BAND PORTABLERADIO
RT304/464 EN 2/11/03, 3:51 PM3
Power Supply
Installing batteries
1. Remove battery compartment door
by applying thumb pressure to area
indicated on battery door and then
lift the door out and off the cabinet.
2. Before inserting the batteries,
observe the polarities (That is, + and
-) of the battery, then relate the
polarities to the engraved diagram
inside the battery compartment.
Connect 4 LR14 / R14 / “C” size
battery to the connector plug.
3. Replace the compartment door.
3
Connecting power cord
1. Remove battery compartment door.
2. Plug the power cord into 230V-50Hz AC
outlet.
3. Replace the compartment door.
RT304/464 EN 2/11/03, 3:51 PM4
Ce manuel convient aux modèles suivants
1
Autres manuels THOMSON Radio-réveil
THOMSON
THOMSON CR50 Manuel utilisateur
THOMSON
THOMSON CT400i Manuel utilisateur
THOMSON
THOMSON CP284DAB Manuel utilisateur
THOMSON
THOMSON RR640CD Manuel utilisateur
THOMSON
THOMSON RR540CD Manuel utilisateur
THOMSON
THOMSON CR221I Manuel utilisateur
THOMSON
THOMSON RR96L Manuel utilisateur
THOMSON
THOMSON RR520U Manuel utilisateur
THOMSON
THOMSON RR550CD Manuel utilisateur
THOMSON
THOMSON CL300P Manuel utilisateur
THOMSON
THOMSON CP280 Manuel utilisateur
THOMSON
THOMSON RR95 Manuel utilisateur
THOMSON
THOMSON CR80 Manuel utilisateur
THOMSON
THOMSON RR200PLL Manuel utilisateur
THOMSON
THOMSON CT390 Manuel utilisateur
THOMSON
THOMSON RT554 - annexe 1 Manuel utilisateur
THOMSON
THOMSON CR50DAB Manuel utilisateur
THOMSON
THOMSON RR60 Manuel utilisateur
THOMSON
THOMSON CR400iBT Manuel utilisateur
THOMSON
THOMSON RR420CD Manuel utilisateur
