Thermaltake WaterRam RGB Manuel utilisateur

WaterRam RGB

Liquid Cooling Memory

DDR4

3200MHz

2x8GB 16GB

Aura Addressable Strip Header(s) Addressable RGB LED Header(s) AORUS RGB Fusion with Digital LEDs

ASUS ASROCK GIGABYTE

JRGB-strip Header(S)

MSIMSI

+5V D G

JRAINBOW

Parts List

This product is intended for installation only by expert users. Please consult with a qualified technician for installation. Improper installation may result in damage to your equipment.

Before you start using this product please follow these basic guidelines:

1. Please carefully read through the instruction manual before beginning the installation process.

2. Please remove your graphics card from your motherboard to ensure the safest process and in order to prevent any possible damages to your CPU and motherboard.

3. It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000.

A x 1

Water Block

B x 2

Memory Module

C x 8

Screw

Installation Guide

Plug the Memory Module(B)

to the DDR4 slot on the

motherboard.

Please refer to the

motherboard manual for

the installation location.

Remove the protective film

of Thermal Pad

on the Water Block(A).

Tighten the Screws(G)

to enclose the

Water Block(A) and

Memory Module(B).

Connect the LED

Y-Cable onto the

Water Block.

D x 1

LED Y - Cable

E x 1

MB SYNC Cable

Motherboard SYNC installation Guide

Please power off the PC and check

the Positive and Negative ends on

the connector before connecting

the cable to motherboard. Connecting

the wrong end can damage the LEDs.

CAUTIONCAUTION

E E E E

Connect the MB SYNC Cable (D)

to LED Y-Cable (E)

WaterRam RGB

Liquid Cooling Memory

DDR4

3200MHz

2x8GB 16GB

Parts List

Installation Guide

Connect the Waterblock onto the controller.

123

Set the DIP switch on the back side of the controller to assign the

number of the controller

NO.1

1 2 3 4

NO.3

1 2 3 4

NO.2

1 2 3 4

NO.4

1 2 3 4

NO.9

1 2 3 4

NO.11

1 2 3 4

NO.10

1 2 3 4

NO.12

1 2 3 4

NO.5

1 2 3 4

NO.7

1 2 3 4

NO.6

1 2 3 4

NO.8

1 2 3 4

NO.13

1 2 3 4

NO.15

1 2 3 4

NO.14

1 2 3 4

NO.16

1 2 3 4

Connect the controller cable onto the motherboard

(USB 2.0 9 pin) and controller.

If you want to connect two or more controllers, you can use

the bridge cable to connect the controllers.

Connect the power cable to the 4pin Molex connecter

and controller.

Fx 1 Gx 1 Hx 1 I x 1 J x 1

Controller Power Cable Velcro

Controller Cable Bridge Cable

www.thermaltake.com

5 6

1 2 3 4

Autres manuels Thermaltake Stockage

Thermaltake

Thermaltake N0006US Manuel utilisateur

Thermaltake

Thermaltake Silver River II ST0018Z Manuel utilisateur

Thermaltake

Thermaltake Muse X-Duo RAID Manuel utilisateur

Thermaltake

Thermaltake Vi-ON ST0009U Manuel utilisateur

Thermaltake

Thermaltake MAX-2533 Manuel utilisateur

Thermaltake

Thermaltake Silver River II ST0016U Manuel utilisateur

Thermaltake

Thermaltake MAX-1542 Manuel utilisateur

Thermaltake

Thermaltake Muse NAS-RAID N0001LN Manuel utilisateur

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

HP StorageWorks MSL2024 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

HP P9000 Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur