Page | 10
DIY PROGRAMMING
1. To start programming press the Programming button and then using the Up/Down
button, navigate until you get to ‘DIY’.
2. Press (tºc) button to enter the program mode.
3. Press the Up/Down button to start programming the 0-24 hours bar. Once the
programming is complete press the Timer button to save the setting. Complete
the steps above to program the rest of the week.
4. If you want to use the same program you have already saved for a day you can
copy it. Find the program for the day you wish to copy. Press the Programming
button and then using the Up/Down button, navigate until you get to ‘DIY’. Then
press (tºc) button to enter programming mode. Press the Timer button to select
the required day of the week. After the required day is selected, press the Copy
button. The COPY symbol will appear on the screen, the selected day setting has
now been copied. Select the Timer button and then select the day you wish to
use the copied setting on. Once the day has been selected, press the Copy
button. The COPY symbol will now disappear and the day selected will now have
the same settings as the one copied.
Heater switch off - timer function
When the heater is operating, press the Timer button once. Use the Up/Down button
to set the heater to switch off at a desired time. To set the minutes, press the Timer
button once again and use the Up/Down button again to select the desired minutes.
The heater will switch off after the timer expires.
Heater switch on - timer function
When the heater is switched off and only the power indicator is illuminated, press and
hold the Timer button for 3 seconds. Use the Up/Down button to set the heater to
switch on at a desired time. To set the minutes, press the Timer button once again and
use the Up/Down button again to select the desired minutes.
Lock
When the heater is operating, to lock the system, simultaneously press and hold the
Up and Down buttons for 3 seconds. A lock symbol will then appear on the screen.
To unlock the system, simultaneously press and hold the Up/Down buttons for 3
seconds.
Memory restart function
In the case of a short term power outage, the heater will automatically switch on and
will operate in the last user settings once the
power supply is restored.
Maintenance
The unit must be cleaned regularly to remove
dust and dirt from external surfaces. Prior to any
maintenance, switch the heater off at the
power supply and ensure it has cooled down.
Use a clean, damp cloth when cleaning. Do not
use detergents.
