Thermal Dynamics CUTMASTER 151 Manuel utilisateur

151

Rev. AF.01 Date: April 2, 2007 Manual # 0-4691

Operating Features:

Operating Manual

AUTOMATED

PLASMA CUTTING SYSTEM

CUTMASTER™

Art # A-04611

SL100SV PLASMA CUTTING

MACHINE TORCH

WE APPRECIATEYOUR BUSINESS!

Congratulations on your new Thermal Dynamics product. We are

proud to have you as our customer and will strive to provide you

with the best service and reliability in the industry. This product is

backed by our extensive warranty and world-wide service network.

To locate your nearest distributor or service agency call 1-800-

426-1888, or visit us on the web at www.thermal-dynamics.com.

This Operating Manual has been designed to instruct you on the

correct use and operation of your Thermal Dynamics product.

Your satisfaction with this product and its safe operation is our

ultimate concern. Therefore please take the time to read the entire

manual, especially the Safety Precautions. They will help you to

avoid potential hazards that may exist when working with this

product.

YOU ARE IN GOOD COMPANY!

The Brand of Choice for Contractors and Fabricators Worldwide.

Thermal Dynamics is a Global Brand of manual and automation

Plasma Cutting Products for Thermadyne Industries Inc.

We distinguish ourselves from our competition through market-

leading, dependable products that have stood the test of time.

We pride ourselves on technical innovation, competitive prices,

excellent delivery, superior customer service and technical

support, together with excellence in sales and marketing expertise.

Above all, we are committed to developing technologically

advanced products to achieve a safer working environment within

the welding industry.

WARNINGS

Read and understand this entire Manual and your employer’s safety practices before installing, operat-

ing, or servicing the equipment.

While the information contained in this Manual represents the Manufacturer's best judgement, the

Manufacturer assumes no liability for its use.

Automated Plasma Cutting System

Automated CutMaster™ 151 Power Supply

SL100 Machine Torch

Operating Manual Number 0-4691

Covered under U.S. Patents.

Published by:

Thermal Dynamics Corporation

82 Benning Street

West Lebanon, New Hampshire, USA 03784

(603) 298-5711

www.thermal-dynamics.com

Thermal Dynamics Corporation

Reproduction of this work, in whole or in part, without written permission of the pub-

lisher is prohibited.

The publisher does not assume and hereby disclaims any liability to any party for any

loss or damage caused by any error or omission in this Manual, whether such error

results from negligence, accident, or any other cause.

Printed in the United States of America

Publication Date: April 2, 2007

Record the following information for Warranty purposes:

Where Purchased:____________________________________

Purchase Date:_______________________________________

Power Supply Serial #:________________________________

Torch Serial #:________________________________________

TABLE OF CONTENTS

SECTION 1:

GENERAL INFORMATION ................................................................................................ 1-1

1.01 Notes, Cautions and Warnings ...................................................................... 1-1

1.02 Important Safety Precautions ....................................................................... 1-1

1.03 Publications .................................................................................................. 1-3

1.04 Note, Attention et Avertissement .................................................................. 1-3

1.05 Precautions De Securite Importantes ........................................................... 1-4

1.06 Documents De Reference ............................................................................. 1-5

1.07 Declaration of Conformity ............................................................................. 1-7

1.08 Statement of Warranty .................................................................................. 1-8

SECTION 2: SPECIFICATIONS ................................................................................................ 2-1

2.01 Scope of Manual .......................................................................................... 2-1

2.02 Power Supply Specifications......................................................................... 2-1

2.03 Input Wiring Specifications ........................................................................... 2-2

2.04 Power Supply Features ................................................................................. 2-3

2.05 Power Supply Options and Accessories ....................................................... 2-4

2.06 Torch Specifications ..................................................................................... 2-5

2.07 Torch Options and Accessories .................................................................... 2-6

2.08 Introduction to Plasma .................................................................................. 2-7

SECTION 3: INSTALLATION ..................................................................................................... 3-1

3.01 Unpacking .................................................................................................... 3-1

3.02 Lifting Options .............................................................................................. 3-1

3.03 Primary Input Power Connections ................................................................. 3-2

3.04 Gas Connections .......................................................................................... 3-4

3.05 Torch Connections ........................................................................................ 3-6

3.06 Torch Installation .......................................................................................... 3-8

3.07 Torch Parts Selection.................................................................................... 3-9

3.08 Power Supply Connection to SC-11 Standoff Control ...................................3-10

3.09 Power Supply Connection to Alternate Standoff Control ............................... 3-11

3.10 Automation Interface PC Board Set-up ........................................................ 3-13

3.11 Optional Remote Current Control Harness Installation .................................. 3-14

SECTION 4: OPERATION ......................................................................................................... 4-1

4.01 Product Features .......................................................................................... 4-1

4.02 Preparations For Operating ........................................................................... 4-2

4.03 Selection, Inspection and Replacement of Consumable Torch Parts ............. 4-6

4.04 Cut Quality ................................................................................................... 4-8

4.05 General Cutting Information .......................................................................... 4-9

4.06 Torch Operation ........................................................................................... 4-10

4.07 Cutting Parameters ...................................................................................... 4-12

4.08 Cutting Specifications .................................................................................. 4-13

4.09 Cutting Speed Chart: Mild Steel, SL100 Torch with Exposed Tip .................. 4-14

4.10 Cutting Speed Chart: Stainless Steel, SL100 Torch with Exposed Tip .......... 4-16

4.11 Cutting Speed Chart: Aluminum, SL100 Torch with Exposed Tip .................. 4-18

4.12 Cutting Speed Chart: Mild Steel, SL100 Torch with Shielded Tip ................... 4-20

4.13 Cutting Speed Chart: Stainless Steel, SL100 Torch with Shielded Tip .......... 4-22

4.14 Cutting Speed Chart: Aluminum, SL100 Torch with Shielded Tip................... 4-24

4.15 Operator's Custom Cutting Speed Charts .................................................... 4-26

TABLE OF CONTENTS (continued)

SECTION 5:

SERVICE .......................................................................................................................... 5-1

5.01 General Maintenance .................................................................................... 5-1

5.02 Common Faults ............................................................................................ 5-5

5.03 Basic Troubleshooting ................................................................................... 5-6

5.04 Advanced Troubleshooting Guide - General Information ............................... 5-11

5.05 Main Input and Internal Power Problems ...................................................... 5-13

5.06 Pilot Arc Problems ....................................................................................... 5-19

5.07 Main Arc Problems ......................................................................................5-24

5.10 Front Panel Parts Replacement ....................................................................5-27

5.11 Left Side Internal Parts Replacement .......................................................... 5-29

5.12 Right Side Internal Parts Replacement ........................................................5-38

SECTION 6:

PARTS LISTS ................................................................................................................... 6-1

6.01 Introduction ................................................................................................... 6-1

6.02 Ordering Information ..................................................................................... 6-1

6.03 Complete Power Supply Replacement .......................................................... 6-1

6.04 Power Supply Options and Accessories ....................................................... 6-2

6.05 Power Supply Major External Replacement Parts ......................................... 6-3

6.06 Power Supply Front Panel Replacement Parts ............................................... 6-4

6.07 Rear Panel Replacement Parts .................................................................... 6-5

6.08 Power Supply Left Side Internal Replacement Parts .................................... 6-6

6.09 Right Side Internal Replacement Parts ........................................................ 6-8

6.10 Torch Replacement Parts .............................................................................6-10

6.11 Torch Replacement Parts .............................................................................6-12

6.12 Torch Consumables ..................................................................................... 6-14

6.13 Torch Spare Parts Kits ................................................................................. 6-14

6.14 Complete Torch Assembly Replacement ...................................................... 6-16

6.15 Torch Options & Accessories ...................................................................... 6-16

PATENT INFORMATION ...........................................................................................................6-17

APPENDIX 1: SEQUENCE OF OPERATION

(BLOCK DIAGRAM) .......................................................................................................... A-1

APPENDIX 2: DATA TAG INFORMATION ................................................................................ A-2

APPENDIX 3: MAINTENANCE SCHEDULE ............................................................................. A-3

APPENDIX 4: TORCH PIN - OUT DIAGRAM ............................................................................ A-4

APPENDIX 5: TORCH CONNECTION DIAGRAM .................................................................... A-5

APPENDIX 6: CONTROL CABLE PIN - OUT DIAGRAM .......................................................... A-6

APPENDIX 7: INTERFACE PCB SWITCH SETTINGS (MOST COMMON SETTINGS) ............ A-7

APPENDIX 8: INTERFACE PCB SWITCH SETTINGS (Division Factors 16-24) ....................... A-8

APPENDIX 9: INTERFACE PCB SWITCH SETTINGS (Division Factors 24-30) ....................... A-9

TABLE OF CONTENTS (continued)

APPENDIX 10: INTERFACE PCB SWITCH SETTINGS (Division Factors 30-33) .............................................. A-10

APPENDIX 11: INTERFACE PCB SWITCH SETTINGS (Division Factors 33-36) .............................................. A-11

APPENDIX 12: INTERFACE PCB SWITCH SETTINGS (Division Factors 36-43) .............................................. A-12

APPENDIX 13: INTERFACE PCB SWITCH SETTINGS (Division Factors 43-50) .............................................. A-13

APPENDIX 14: AUTOMATION INTERFACE PC BOARDWIRING LAYOUT ...................................................... A-14

APPENDIX 15: AUTOMATION INTERFACE PC BOARD LAYOUT and TEST POINTS ....................................... A-15

APPENDIX 16: AUTOMATION INTERFACE PC BOARD WIRING CONNECTIONSTO OEM CNC HARNESS ... A-16

APPENDIX 17: AUTOMATION INTERFACE PC BOARD WIRING CONNECTIONSTO ALTERNATE

CNC HARNESS ................................................................................................................................. A-17

APPENDIX 18: MAIN PC BOARD LAYOUT .................................................................................................... A-18

APPENDIX 19: MAIN PC BOARD WIRING LAYOUT (208/230-Volt POWER SUPPLIES) .................................... A-20

APPENDIX 20: MAIN PC BOARD WIRING LAYOUT (400-V, 415-V, 460-V, 600-V POWER SUPPLIES) .............. A-21

APPENDIX 21: LOGIC BOARD LAYOUT ....................................................................................................... A-22

APPENDIX 22: POT / LED BOARD LAYOUT ................................................................................................. A-23

APPENDIX 23: OUTPUT DIODE LAYOUT ..................................................................................................... A-24

APPENDIX 24: OUTPUT DIODE WIRING DIAGRAM ..................................................................................... A-25

APPENDIX 25: PILOT BOARD LAYOUT ........................................................................................................ A-26

APPENDIX 26: 28VAC CIRCUIT DIAGRAM ................................................................................................... A-27

APPENDIX 27: 208/230V SYSTEM SCHEMATIC ............................................................................................ A-28

APPENDIX 28: 208/230V SYSTEM SCHEMATIC ............................................................................................ A-30

APPENDIX 29: 400 / 415 / 460V SYSTEM SCHEMATIC .................................................................................. A-32

APPENDIX 30: 400 / 415 / 460V SYSTEM SCHEMATIC .................................................................................. A-34

APPENDIX 31: 600V SYSTEM SCHEMATIC .................................................................................................. A-36

APPENDIX 32: 600V SYSTEM SCHEMATIC .................................................................................................. A-38

APPENDIX 33: Manual Publication History ..................................................................................................... A-40

Global Customer Service Contact Information ............................................................................. Inside Rear Cover

Manual 0-4691 1-1 GENERAL INFORMATION

SECTION 1:

GENERAL INFORMATION

1.01 Notes, Cautions and Warnings

Throughout this manual, notes, cautions, and warnings

are used to highlight important information. These high-

lights are categorized as follows:

NOTE

An operation, procedure, or background informa-

tion which requires additional emphasis or is help-

ful in efficient operation of the system.

CAUTION

A procedure which, if not properly followed, may

cause damage to the equipment.

WARNING

A procedure which, if not properly followed, may

cause injury to the operator or others in the oper-

ating area.

1.02 Important Safety Precautions

WARNINGS

OPERATION AND MAINTENANCE OF

PLASMA ARC EQUIPMENT CAN BE DAN-

GEROUS AND HAZARDOUS TO YOUR

HEALTH.

Plasma arc cutting produces intense electric and

magnetic emissions that may interfere with the

proper function of cardiac pacemakers, hearing

aids, or other electronic health equipment. Per-

sons who work near plasma arc cutting applica-

tions should consult their medical health profes-

sional and the manufacturer of the health

equipment to determine whether a hazard exists.

To prevent possible injury, read, understand and

follow all warnings, safety precautions and in-

structions before using the equipment. Call 1-603-

298-5711 or your local distributor if you have any

questions.

GASESANDFUMES

Gasesandfumes produced during the plasmacuttingprocess

can be dangerous and hazardous to your health.

• Keepall fumes and gases fromthebreathingarea. Keep

yourheadoutof the welding fume plume.

• Use an air-supplied respirator if ventilation is not ad-

equate to remove all fumes and gases.

• The kinds of fumes and gases from the plasma arc de-

pend on the kind of metal being used, coatings on the

metal, and the different processes. You must be very

carefulwhen cutting orweldingany metals which may

contain one or more of the following:

Antimony Chromium Mercury

Arsenic Cobalt Nickel

Barium Copper Selenium

Beryllium Lead Silver

Cadmium Manganese Vanadium

• Always read the Material Safety Data Sheets

(MSDS) that should be supplied with the material

you are using. These MSDSs will give you the in-

formation regarding the kind and amount of fumes

and gases that may be dangerous to your health.

• For information on how to test for fumes and gases

in your workplace, refer to item 1 in Subsection 1.03,

Publications in this manual.

• Use special equipment, such as water or down draft

cutting tables, to capture fumes and gases.

• Do not use the plasma torch in an area where com-

bustible or explosive gases or materials are located.

• Phosgene, a toxic gas, is generated from the vapors

of chlorinated solvents and cleansers. Remove all

sources of these vapors.

• This product, when used for welding or cutting,

produces fumes or gases which contain chemicals

known to the State of California to cause birth de-

fects and, in some cases, cancer. (California Health

& Safety Code Sec. 25249.5 et seq.)

GENERAL INFORMATION 1-2 Manual 0-4691

ELECTRICSHOCK

Electric Shock can injure or kill. The plasma arc process uses

and produces high voltage electrical energy. This electric en-

ergy can cause severe or fatal shock to the operator or others

intheworkplace.

• Nevertouchanypartsthatareelectrically“live”or“hot.”

• Wear dry gloves and clothing. Insulate yourself from

the work piece or other parts of the welding circuit.

• Repairorreplaceall worn or damaged parts.

• Extracaremustbe taken when the workplace ismoistor

damp.

• Installandmaintain equipment according to NECcode,

refer to item 9 in Subsection 1.03, Publications.

• Disconnectpowersourcebefore performing any service

orrepairs.

• Read and follow all the instructions in the Operating

Manual.

FIREANDEXPLOSION

Fire and explosion can be caused by hot slag, sparks, or the

plasmaarc.

• Besurethere is no combustible orflammablematerialin

the workplace. Any material that cannot be removed

mustbe protected.

• Ventilateallflammableorexplosivevaporsfromthework-

place.

• Do not cut or weld on containers that may have held

combustibles.

• Provideafirewatch when working in an areawherefire

hazardsmayexist.

• Hydrogengasmaybeformedandtrappedunderalumi-

numworkpieceswhentheyarecutunderwaterorwhile

usinga water table. DO NOT cut aluminum alloys un-

derwater or on a water table unless the hydrogen gas

canbe eliminated or dissipated. Trappedhydrogengas

that is ignited will cause an explosion.

NOISE

Noisecancausepermanenthearing loss. Plasma arc processes

can cause noise levels to exceed safe limits. You must protect

your ears from loud noise to prevent permanent loss of hear-

ing.

• To protectyourhearingfromloudnoise,wearprotective

ear plugs and/or ear muffs. Protect others in the work-

place.

• Noiselevels should bemeasured to be surethe decibels

(sound) do not exceed safe levels.

• For information on how to test for noise, see item 1 in

Subsection 1.03, Publications, in this manual.

PLASMAARC RAYS

PlasmaArc Rays caninjureyoureyesandburnyourskin. The

plasmaarc process producesverybright ultra violet andinfra

redlight. Thesearc rays will damage youreyesandburnyour

skin if you are not properly protected.

• To protect your eyes, always wear a welding helmet or

shield. Alsoalwayswearsafetyglasseswithsideshields,

goggles or other protective eye wear.

• Wear welding gloves and suitable clothing to protect

your skin from the arc rays and sparks.

• Keep helmet and safety glasses in good condition. Re-

place lenses when cracked, chipped or dirty.

• Protect others in the work area from the arc rays. Use

protective booths, screens or shields.

• Use the shade of lens as suggested in the following per

ANSI/ASCZ49.1:

Minimum Protective Suggested

Arc Current Shade No. Shade No.

Less Than 300* 8 9

300 - 400* 9 12

400 - 800* 10 14

* These values apply where the actual arc is

clearly seen. Experience has shown that lighter

filters may be used when the arc is hidden by the

workpiece.

Autres manuels pour CUTMASTER 151

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Thermal Dynamics Système de soudage

Thermal Dynamics

Thermal Dynamics CutMaster 40MM Manuel utilisateur

Thermal Dynamics

Thermal Dynamics SL60 Manuel utilisateur

Thermal Dynamics

Thermal Dynamics 35C DRAG-GUN PLUS Manuel utilisateur

Thermal Dynamics

Thermal Dynamics A40 Manuel utilisateur

Thermal Dynamics

Thermal Dynamics ULTRA-CUT 400 XT Manuel utilisateur

Thermal Dynamics

Thermal Dynamics CutMaster 58 Manuel utilisateur

Thermal Dynamics

Thermal Dynamics CUTMASTER 39 Manuel utilisateur

Thermal Dynamics

Thermal Dynamics Ultra-Cut 400 Manuel utilisateur

Thermal Dynamics

Thermal Dynamics Drag-gun Manuel utilisateur

Thermal Dynamics

Thermal Dynamics Cutmaster 82 Manuel utilisateur

Thermal Dynamics

Thermal Dynamics CUTMASTER Manuel utilisateur

Thermal Dynamics

Thermal Dynamics Pak Master 100XL Manuel utilisateur

Thermal Dynamics

Thermal Dynamics cutmaster A60 Manuel utilisateur

Thermal Dynamics

Thermal Dynamics A80 CUTMASTER Manuel utilisateur

Thermal Dynamics

Thermal Dynamics ULTRA-CUT 200 XT Manuel utilisateur

Thermal Dynamics

Thermal Dynamics CUTMASTER 81 Manuel utilisateur

Thermal Dynamics

Thermal Dynamics MERLIN 6000 Manuel utilisateur

Thermal Dynamics

Thermal Dynamics 38 Cutmaster Manuel utilisateur

Thermal Dynamics

Thermal Dynamics PAK Master 150XL Manuel utilisateur

Thermal Dynamics

Thermal Dynamics 42 CUTMASTER Manuel utilisateur

Thermal Dynamics

Thermal Dynamics PCH-100XL Manuel utilisateur

Thermal Dynamics

Thermal Dynamics CUTMASTER Manuel utilisateur

Thermal Dynamics

Thermal Dynamics PakMaster 75XL Plus Manuel utilisateur

Thermal Dynamics

Thermal Dynamics CutSkill PCH-42 Torch Manuel utilisateur

Manuels Système de soudage populaires d'autres marques

Berner

Berner PLASMACUT 54 Manuel utilisateur

Pro Spot

Pro Spot PR-155 Manuel utilisateur

Forney

Forney 210 Manuel utilisateur

Thermal Arc

Thermal Arc 400S Manuel utilisateur

Lincoln Electric

Lincoln Electric HANDYMIG 170I Manuel utilisateur

GYS

GYS PROTIG 201 AC/DC Manuel utilisateur

TAFA

TAFA 30*8B35 Manuel utilisateur

Lincoln Electric

Lincoln Electric INVERTEC V350-PRO CE Manuel utilisateur

ESAB

ESAB Buddy Arc 145 Manuel utilisateur

CIGWELD

CIGWELD 636804 Guide rapide

Red-D-Arc

Red-D-Arc DC-400 Manuel utilisateur

Hobart Welding Products

Hobart Welding Products Spool Gun DP 3035-10 Manuel utilisateur

Elettro

Elettro HI-MIG 3000 SYNERGIC Manuel utilisateur

WIA

WIA Weldmatic 270 CP132-2 Manuel utilisateur

Sonics

Sonics H520T Manuel utilisateur

Miller

Miller Big Blue 400D Manuel utilisateur

NewArc

NewArc RT2000 Guide de démarrage rapide

Hypertherm

Hypertherm powermax1000 Manuel utilisateur