TheFibers OCPM-18 Manuel utilisateur
OCPM-18
Page 2/16
1. Introduction
OCPM-18 is developed to measure exact power and frequency adoptable to the various network conditions.
This instrument is portable and made to be appropriate to the outside environment.
1.1 Main Functions
- Works as a typical power meter
- It is compact in size and lightweight for excellent portability
- OCPM-18 is easy-to-use testing instruments for optical fiber network
- Provide linkage with various wavelength network
- Can use the existing charger
- Adopter color LCD
- Saves/ Stores measured data
1.2 Standard Accessories
Accessories Quantity
Power Meter Body (included Battery) 1 EA
Body Rubber Case 1 EA
USB Data Cable 1 EA
Typical 5-pin Charger 1 EA
Software CD 1 EA
User Manual 1 EA
OCPM-18
Page 3/16
1.3 Optical Standards
- Wavelength
Parameter Unit Specification
Range nm 1270-1610
Number of Channels 18
Measuring Wavelengths nm 1270/1290/1310/1330/1350/1370/1390/1410/1430
1450/1470/1490/1510/1530/1550/1570/1590/1610
Wavelength Resolution nm 20
- Optical Power
Parameter Unit Specification
Range of display dBm +10 ~ -40
Accuracy dB
±
0.5dB @ -20dBm
Resolvability dB 0.01
Measuring unit dB / dBm
- Optical Connector
Optical connector interchangeable adapter.
FC, ST, SC, LC
1.4 Specifications
- Input voltage : 1250mAh 3.7v
- Electricity consumption : MAX 0.2A
- Power Supply : Rechargeable Lithium-Polymer Battery
- Weight : 250g
- Width : 77.9mm
- Height : 154.9mm
- Thickness : 35mm
- Display size : 2.8 inch
- Operating Temperature : 0℃~ +50℃
- Guaranteed time of operating
: 600 minutes when fully charged
- Relative Humidity
: 10%~90% RH from 0 ~ 40℃
OCPM-18
Page 4/16
1.5 About the charger
A rechargeable battery is installed inside the measuring instrument, and this charger module has the
Ministry of Information and Communication standard 5 pin charger phot. When the charger module is
connected to the measuring instrument, the circular picture on the connecting part points to the bottom of the
instrument.
[ Typical 5-pin Charger ]
-Charging conditions :
LED Color Action of LED Conditions for battery charge
Red ON The charger module is in charging mode.
Green ON Charge complete.
※Caution
- Do not allow battery to short circuit.
- Keep the battery away from fire.
- Never dismantle, change structure of distort the battery.
- Do not dip the battery in water or other liquid.
- Do not store the battery in places warmer than 60 degrees Celsius.
- Do not drop or give a shock to the battery.
1.6 Warranty
OCPM-18 you bought is passed our all inspection and then is shipped to the customers. TheFibers give
you a warranty for one year from the buying date. During the warranty period, the returned product by
freight prepaid from the customer, TheFibers will provide repair and replacement for any defective product
without additional charge which is needed to repair or replacement.
However please careful that the following are expressly NOT COVERED under warranty:
▪Any loss, damage by using un-approved Battery and AC Adaptor
▪In case the serial or warranty sticker is removed
▪Failure to use products under abnormal operating conditions
▪Any loss, damage by user fault
▪Any damage by disassembly without permission
OCPM-18
Page 5/16
2. Getting Started
2.1 Explanation of user interface and operating keys
Key Function
Backlight Power ON/OFF
PM Power Display
CWDM Scanned dB value of the wavelength is represented as a data.
SCAN Wavelength is scanned and dB value is represented.
dB/dBm Each time you press the key, dB and dBm are repeated.
▲Up arrow
Graph Scanned dB value of the wavelength is represented as a graph.
Recall Store
ENTER Enter
Save Data Save
ESC Cancel
▼Down arrow
MENU Set up and Data delete
OCPM-18
Page 6/16
2.2 Screen Information
1) Power ON / OFF
-
Is used to turn the instrument power on and off. If you press the (Backlight) button for more than 2
seconds, the logo shown below appears and it moves to ‘Power Meter’, which is the basic channel.
-
Press the
(Backlight) button for more than 2 seconds to turn the power off.
2) Power Meter
-
Power Measurement is divided into ‘Auto’ and ‘Manual’. If you select 'Auto', the largest value are shown after
the measurement.
OCPM-18
Page 7/16
-
Use the arrow keys to different values can be found.
-
'Manual' is the wavelength of the desired user is used to determine the value of dBm.
-
In the above screen , click (PM) button, will write the wavelength to be measured.
And click
(Enter) button.
-
If you want to re-select ‘Auto’, click
(PM) button
.
3) CWDM
- Depress the
(CWDM) button, then the display will show as the figure below.
- If a screen shows asking for a channel selection, input the channel you want and press the
(Up arrow)
and (Down arrow) key.
- Pressing the
(dB/dBm) key alternately shows the ‘dBm’ and ‘dB’.
OCPM-18
Page 8/16
4) SCAN
- If you press the
(SCAN) button, The selected wavelengths are scanned.
5) Graph
- If you press the
(Graph) button after scanning, a graph screen like the one on the right show.
OCPM-18
Page 9/16
- If you press the
(Graph) button again it returns to text mode.
6) Recall
- Press the
(Recall) button to access the menu that calls the measured result of optical power for each
channel in the form of text.
- Press the
(Enter) button to select the data you want, the data saved are displayed.
OCPM-18
Page 10/16
7) Save
- This saves the currently displayed value, and All text and graph modes are savable using the
(save)
button.
- When you press the (save) button the following message shows and asks the name of the Data to be
saved, and the data based on the current data and time is saved if you press the
(Enter) button.
2.3 Menu
If you press the (Menu) button, it changes to a screen where you can configure the operating
environment of OCPM-18.
- The menu consists of ‘SCAN SET’, ‘Select Lambda’, ‘Off Set’, ‘Auto Power Off’, ‘Time Set’, ‘Data Delete’,
‘Data Format’, ‘System Info’, ‘Scan Display’, ‘SCAN Mode’ and ‘Threshold’.
Table des matières
Autres manuels TheFibers Instrument de mesure
Manuels Instrument de mesure populaires d'autres marques
Endress+Hauser
Endress+Hauser Proline Promag 50 Caractéristiques techniques
Siemens
Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces
KLINGER
KLINGER CMF V Series Manuel utilisateur
EXFO
EXFO FTB-2 Manuel d'exploitation et d'entretien
Keysight
Keysight M8290A Manuel utilisateur
ADTEK
ADTEK MW-5 Manuel utilisateur