Manual Rev 1.1
3. Delete All :
Step 1: Enter programming mode
Step 2: Press “3”
Step 3: Press “3”
Step 4: Press “999”
Step 5: Wait for 1min to delete all cards.
Note: The back light of the keypad “3,6,9,enter” will be off.
e. Key “4”: Lock Release Mode
0. Lock Release Time: (How long the lock will be open)
Step 1: Enter programming mode
Step 2: Press “4”
Step 3: Press “0”
Step 4: Enter (01-99)s Default : 05 seconds
Step 5: Press “Enter”
1. Toggle Mode:
Step 1: Enter programming mode
Step 2: Press “4”
Step 3: Press “1”
Step 4: Press “Enter”
f. Key “5”: Door Open Time (How long the door can be open before buzzer makes noise)
Step 1: Enter programming mode
Step 2: Press “5”
Step 3: Input time (01 - 99 seconds) Default: 00 seconds
Step 4: Press “Enter”
Note: If time set “00”, this will Disable Alarm.
g. Key “6”: Add User Pin
0. Read card: (Auto Location)
Step 1: Enter programming mode
Step 2: Press “6”
Step 3: Press “0”
Step 4: Present the card
Step 5: Enter 4 Digit Pin.
Step 6: Press “Enter”
Step 7: Repeat step 4, 5, 6 if more than one card
Step 8: Press “ESC”
1. Card Number:
Step 1: Enter programming mode
Step 2: Press “6”
Step 3: Press “1”
Step 4: Enter 5 Digit Card Number
Step 5: Enter 4 Digit Pin.
Step 6: Press “Enter”
Step 7: Repeat step 4, 5, 6 if more than one card number
Step 8: Press “ESC”
