Tesvor S6 Manuel utilisateur
Open the sealing plug of the water tank, and slowly pour water into it.
Close the sealing plug of the water tank, paste the cleaning cloth to
Velcro on the bottom of the tank.
Press the button at the rear of the robot to take out the dust box and
install the water tank.
Click on the remote control or Smart Clean on the app.
1
1
2
2
3
3
4
4
How to Use
Note:
1. Please remove the water tank when charging to avoid danger.
2. Mopping is not suitable for carpets. When mopping, please roll up the edges of
carpets or use magnec strips to isolate carpets.
3. If there is any abnormality in the robot, please try to turn off the power switch on
the right side of the robot to restart it when not charging.
1
Remove the water tank: press the button at the rear of the robot to
remove the water tank.
Remove the cleaning cloth, rinse and dry it.
Drain the remaining water in the water tank.
Dry the water tank.
1
1
2
2
3
3
4
4
Water Tank Maintenance
2
Please DO NOT lift up and tilt the
robot vacuum after water tank is
installed, in case water inflows the
machine and damage it.
55
MORE FAMILY TIME. LESS CLEANING.
Importer: Bright star consulng e.K.
Address: Humboldtstr.5, 31812 Bad Pyrmont Germany
Call Us : +49 69 365065463 Mon-Fri 9AM-5PM (CET)
Company website: hps://www.tesvor.com/de
Customer Service: service@tesvor.com
Manufacturer: Shenzhen Zhisheng Dianzishangwuyouxiangongsi
Address: Qianwan Yilu 1hao Adong 201shi Qianhai shenganghezuoqu Shenzhen Guangdong China
Autres manuels pour S6
6
Table des matières
Autres manuels Tesvor Aspirateur
Tesvor
Tesvor R5 Manuel utilisateur
Tesvor
Tesvor V300 Manuel utilisateur
Tesvor
Tesvor S6 Manuel utilisateur
Tesvor
Tesvor S6 Manuel utilisateur
Tesvor
Tesvor S6 Manuel utilisateur
Tesvor
Tesvor X500 Manuel utilisateur
Tesvor
Tesvor X500Pro Manuel utilisateur
Tesvor
Tesvor X500Pro Manuel utilisateur
Tesvor
Tesvor X500Pro Manuel utilisateur
Tesvor
Tesvor X500Pro Manuel utilisateur
