Tesvor S6 Manuel utilisateur
Note：Please track the first test run of the robot and help troubleshoot
few ny problems to guarantee a successful cleaning. Do not stand in front of
the robot during the test.
Hinweis: Bie verfolgen Sie den ersten Testlauf des Roboters und helfen
Sie bei der Behebung einiger kleiner Probleme, um eine erfolgreiche Reini-
gung zu gewährleisten. Stellen Sie sich während des Tests nicht vor den
Roboter.
Remarque: S'il vous plaît suivre le premier test de fonconnement du
robot pour garanr un neoyage efficace. Gérer les zones où le robot risque
de se coincer, tels que des pantoufles au sol, des fils encombrés, des miroirs,
les tapis noir etc.
Ne vous tenez pas devant le robot pendant le test.
Nota ： Verificare la prima prova di funzionamento del robot al fine di
risolvere alcuni piccoli problemi per garanre una pulizia riuscita. Non sostare
davan al robot durante il test.
CONTENTS
1. Safety Instructions
3. Using Your S6
4.Cleaning and Maintenance
5. Troubleshooting
6. Specification
Important Tips before Use
Preparation
LED Indication
Charging Modes
Switching Modes
Cleaning Modes
Set Time and Scheduled Cleaning
S6 Anatomy
Clean the Rolling Brush
Clean the Side Brushes
Clean the box and Filters
Replace the Side Brushes
Clean the Sensors and Charging Terminals
2. What’s in the Box
P2
P5
P6
P6
P7
P9
P9
P11
P13
P14
P15
P15
P16
P17
P17
P10
P14
P18
P19
7. Customer Service P19
Safety Instructions for S6 and Accessories
Warning
To reduce the risk of injury or damage, read these safety instructions
carefully and keep them at hand when setting up, using, and maintaining
this device.
Aenon
1. Safety Instructions
1. Do not disassemble, repair or refit the product without authorization;
otherwise, it may damage the product or pose a hazard.
2. Do not use the device in an environment with a risk of fire or explosion.
3. This device is only to be used with the original power adapter; otherwise, it
may be damaged or catch fire.
4. This device is not a toy. Do not sit or stand on this device. Small children and
pets should be supervised when this device is operating.
5. If the metal part of the power plug is dusty, please wipe it with a dry cloth.
6. The power adapter is applied to a 100-240V AC voltage. Please plug it into the
socket properly and keep away from children.
7. Do not wash or soak the main body and electronic accessories in water;
otherwise, the device may be damaged by a short circuit.
8. Do not damage, load weight on, heat, pull, or bend it.
9. During cleaning, please pay attention to the safety of toddlers and the elderly
at home to avoid tripping, and to avoid injury please do not touch the wheel and
side brush. (Please pay special attention to toddlers).
10. This device is for indoor use only. Please do not use it outdoors.
11. Do not allow metal and conductive materials to come in contact with the
battery. It may result in a short circuit.
1. Do not touch the device with wet hands. It may result in an electric shock.
2. Do no place the device where it could easily fall, such as on tables, chairs, high
platforms in room, etc.
3. The device has a sophisticated design and should be protected from long-term
exposure to sunlight.
4. Do not use the device in humid environments, such as bathrooms.
5. Do not place the device near cigarette butts, lighters or open fires.
6. Clean the product at the end of charging.
7. Please turn off the power switch on the side of the robot when it is out of
service for a long time.
2
Safety Instructions for S6 and Accessories
Warning
Danger
1. When skin or clothing is exposed to the battery electrolyte, please immediately
wash with clean water to avoid inflammation of the skin, etc.
2. Do not use the rechargeable battery on other devices. This battery is only
suitable for the Tesvor robot vacuum cleaner.
3. If the battery’s outer box is found to be deformed and enlarged, or there is a
leakage of electrolytes, do not charge or continue to use to avoid danger.
4. Do not throw or inflict a strong impact on the battery. It may result in leakage,
heating or rupture.
5. Do not disassemble the battery pack. It may result in battery rupture and
electrolyte outflow, leading to fire, explosion, and other dangers.
6. This device can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning the use
of the device in a safe way and understand the hazards involved.
7. Children should be supervised to ensure they do not play with this device.
8. Cleaning and maintenance must not be performed by children without adult
supervision.
9. This device contains batteries that can only be replaced by skilled people.
10. Only use the detachable supply unit provided with this device to recharge the
battery.
8. Before using the device, please remove all vulnerable items on the floor, such as
glass, lamps, and items such as wires and curtains that may become entangled with
the side brush and suction passages.
9. When the dust box is full, please empty it into the garbage before using it again.
10. Do not use the robot to clean construction waste.
11. The operating temperature of the device ranges from 0 degrees Celsius to 40
degrees Celsius; please do not use it in a high-temperature environment.
12. Before the device is scrapped, please remove the battery from the robot. When
you remove the battery, please ensure that the device is not connected to a power
supply. Please recycle the battery safely for environmental protection.
1. Always use a dedicated battery adapter to avoid leakage, heating or rupture.
2. Do not short-circuit the battery or remove the battery. It may result in leakage,
heating or rupture.
3. Do not transport or preserve with necklaces, hairpins and other metal objects. It
may result in a short circuit, leakage, heating or rupture.
4. Do not burn or heat the battery. It may result in leakage, heating or rupture.
3
Aenon
11. The power supply must be removed from the socket-outlet before cleaning or
maintaining the device.
12. The battery must be removed from the device before it is scrapped.
13. The device must be disconnected from the mains supply when removing the
battery.
14. The battery should be disposed of safely.
15. How to remove the battery：
1. If abnormal overheating is discovered during charging, stop using it immediately
to avoid leakage, heating or rupture.
2. To prolong the service life of the battery, please remove the battery and place it
in a cool, dry environment if it is out of service for a long time; this will avoid
leakage, heating or rupture.
3. Do not soak the battery in water or let it come into contact with any liquid;
otherwise, it may cause leakage, heating or rupture.
4. Be sure to stop using it immediately in case of any problem (e.g., discoloration
or deformation), to avoid leakage, heating or rupture.
5. Always use tape to insulate the battery’s electrode when recycling or disposing
of it.
①Take out the two screws on the battery cover with a screwdriver.
②Take off the battery cover.
③Take the battery out and unplug the electric wires to remove the battery.
4
2. What’s in the Box
Main Body
Charging Base Remote Control
(2 * AAA Batteries required
but NOT included)
High-effective
Filter/Sponge
Power Adapter
Cleaning Tool Side Brushes(4)
While the accessories provided for some models are slightly different,
they are subject to the actual product.
5
Water Tank Component Mop
Important Tips before Use
Remove power cords and small objects from the floor that may become
entangled with the S6.
The S6 may climb on top of objects less than 0.63 in/16 mm in height.
Remove these objects if possible.
Do NOT stand around narrow places, such as thresholds and aisles, to reduce
the uncovered rate.
The S6 will clear all memories and re-plan all work routes if it is manually
moved or it is controlled by the remote control during cleaning. To ensure it
works efficiently, please do NOT arbitrarily move S6 manually or operate it
by remote control during cleaning.
Anti-drop sensors prevent the S6 from tumbling down stairs and steep
drops. They may work less effectively if they are dirty or used on reflective/very
dark-colored floors. It is recommended that physical barriers are used to block
off areas where the S6 may fall.
Please make sure all furniture is properly organized so that the S6 is able
to clean well without becoming stuck.
1
1
2
2
3
3
4
4
5
5
6
3. Using Your S6
6
6
Preparation
Install the side brushes before use. Please note L and R should correspond to
each other when installing the side brushes.
Turn on the main power switch on the side of S6.
Place the Charging Base on a hard, level surface and against a wall.
Do not place any objects within 3.3 ft. to the left / right and 6.6 ft. to the
front of the charging base, and do not place any mirrors or other reflective
objects within this range.
1
2
3
4
7
Remove the protective
film before use.
Remove before use
Autres manuels pour S6
6
Table des matières
Autres manuels Tesvor Aspirateur
Tesvor
Tesvor S6 Manuel utilisateur
Tesvor
Tesvor S6 Manuel utilisateur
Tesvor
Tesvor S6 Manuel utilisateur
Tesvor
Tesvor X500Pro Manuel utilisateur
Tesvor
Tesvor X500Pro Manuel utilisateur
Tesvor
Tesvor S6 Manuel utilisateur
Tesvor
Tesvor X500Pro Manuel utilisateur
Tesvor
Tesvor Robot Vacuum Manuel utilisateur
Tesvor
Tesvor M1 Manuel utilisateur
Tesvor
Tesvor X500 Manuel utilisateur
