Testrite Visual Charisma SEG XSS Custom Adjustable Series Manuel utilisateur

Page 1 of 2Version: 1

Align frame pieces with matching numbers, 1 with 1, 2 with 2, etc.

1. For each corner, align holes of bracket with the holes on the frame and lightly tighten using the small Allen screws provided. Repeat for all

four sides. Once completed, go back and fully tighten all the screws.

2. If applicable, place frame joiner in between frame halves. Align frame holes with joiner holes and use the screws provided to secure.

3. Place center support bar bracket into frame channel and use an Allen key to expand the bracket inside the channel to secure it in place.

4. Align uprights with base holes and attach using the large at head Allen screws provided. When inserting screws, tighten BOTH by hand

rst. Then, fully tighten using an Allen key.

5. Install the graphic per the instructions on page 2.

6. Choose the frame height position, then connect the frame to the uprights using the puck screws provided.

Charisma™ SEG Stand - XSS Custom Adjustable Series

4. 5. Graphic Install - See next page

Position 1

Position 2

Position 3 (If applicable)

2. (If applicable)

joiner

Page 2 of 2Version: 1

1. To install the graphic, take the corner with the pull tag on it and press about 6”-10” of silicone into the frame channel corner A. Repeat for the

opposite corner B. Repeat for the next corner C. Lastly, repeat for the nal corner D.

2. After all corners are pressed in, press the silicone into the frame channel at the mid-points on all four sides.

3. Press silicone into frame evenly between the corner and midpoints.

This prevents the graphic from bunching up or stretching too much and will ensure a smooth and tight t.

4. To remove the graphic from the frame, simply pull up on the pull tag.

5. Repeat steps 2-4 on the second side, if applicable.

Charisma™ SEG Stand - XSS Custom Adjustable Series

pull tag

(a)

(b)

(c)

(d)

pull tag

Table des matières

Autres manuels Testrite Visual Support et étagère

Testrite Visual

Testrite Visual Charisma SEG Expo Stand XP Series Manuel utilisateur

Testrite Visual

Testrite Visual Charisma SEG XSS Custom Adjustable Series Manuel utilisateur

Testrite Visual

Testrite Visual Skyscraper Mightee Mount SKMM Series Manuel utilisateur

Testrite Visual

Testrite Visual Charisma Frame XSMA Manuel utilisateur

Testrite Visual

Testrite Visual Privacy Stand PVC3 Manuel utilisateur

Testrite Visual

Testrite Visual Charisma SEG Epic Stand XS Series Manuel utilisateur

Testrite Visual

Testrite Visual Charisma SEG XSS Series Manuel utilisateur

Testrite Visual

Testrite Visual Rolling Teacher Shield Series Manuel utilisateur

Manuels Support et étagère populaires d'autres marques

Salamander

Salamander Acadia AC/W/L400/WH Manuel utilisateur

Fohhn

Fohhn VAT-09 Guide de l'utilisateur

ricoo

ricoo FS0522 Manuel utilisateur

AMSOIL

AMSOIL BMK-22 Guide rapide

Kargo Master

Kargo Master 48220 Manuel utilisateur

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur

ricoo

ricoo S1222 Manuel utilisateur

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuel utilisateur

VidaBox

VidaBox VB MNT FFS2 Manuel utilisateur

Welch Allyn

Welch Allyn 48960 Manuel utilisateur

Arkon

Arkon CM035-ST-2 Manuel utilisateur

PROEL

PROEL PLWIN60C Manuel utilisateur

Agilent Technologies

Agilent Technologies E2609B Manuel utilisateur

Mustang

Mustang MV-ARM4 Manuel utilisateur

Mounting Solutions

Mounting Solutions WRM-320 Manuel utilisateur

Pyle

Pyle PMKSPAD1 Manuel utilisateur

ShelterIt

ShelterIt 21208 Manuel utilisateur

SPL

SPL RackPack?4 1040 Manuel utilisateur