TerraTec DMX 6Fire USB Manuel utilisateur
Scope of delivery
Start by making sure that the contents of the package are complete.
The DMX 6Fire USB package should contain the following items:
■1 DMX 6Fire USB (the hardware)
■1 network adapter
■1 adapter (6.3 mm -> 3.5 mm, stereo)
■1 adapter (6.3 mm -> 3.5 mm, mono)
■1 USB cable (1.8 m)
■1 installation CD (with detailed manual)
■1 Quick Start Guide
■1 customer service card
■1 registration card with the serial number
Windows installation—step by step
Please follow the steps in the same exact order they appear here.
Do not connect the DMX 6Fire USB to the computer until the point
specified in the installation.
Which operating system?
The DMX 6Fire USB can be used with Windows XP (Service Pack 2) and Windows Vista
only. Older Windows versions are not supported. Please ensure that you have applied the
current service packs and updates to your Windows installation.
Power supply
The DMX 6Fire USB is not bus-powered and thus cannot be used without a power
adapter. Power supply via USB cable is feasible only for smaller USB devices; more
complex systems like the DMX 6Fire USB require a separate power connection. More-
over, a power adapter provides much "cleaner" power than a USB port, which has a
noticeable effect on sound quality. Therefore, connect the 6Fire to the power adapter
provided.
2 DMX 6Fire USB (English)
Installing the DMX 6Fire USB driver in Windows XP
1. Before you start, ensure that your Windows XP version is up to date. Right-
click the "My Computer" icon and choose "Properties" from the context menu.
If you still have the default "Teletubbyland" desktop background image for XP,
the following path will take you to the information you need: Start -> Settings ->
Control Panel -> System. It is important for Windows XP Service Pack 2 (SP2
for short) or Windows Vista to be installed on your computer. If this is not the
case, please contact Microsoft (www.microsoft.com) to update your system.
For Windows, this is generally free of charge.
2. After you insert the installation CD provided, the AutoStart program starts
automatically. If AutoStart does not open, start it manually by double-clicking
"Autorun.exe" in the CD's root directory. The "Installation" button in
AutoStart installs the DMX 6Fire USB driver and the Control Panel in your op-
erating system.
3. The installation wizard will now display its welcome message.
DMX 6Fire USB (English) 3
4. The default destination for the installation is specified in the following window.
If you prefer another folder, select "Browse..." and choose the corresponding
directory. Then, click "Install".
5. You can disregard the following safety warning without concern. Click "Con-
tinue Anyway" to continue.
4 DMX 6Fire USB (English)
6. The driver is now installed in the system, and as soon as the message below
appears, you can connect the DMX 6Fire USB to your computer's USB 2.0 port
using the cable provided. Windows XP will automatically recognise the device
as new hardware and open the driver installation dialogue.
7. The Windows "Found New Hardware Wizard" asks what driver to use for the
new hardware component. You do not have to search for the driver online. The
next window asks about the driver for the DMX 6Fire USB hardware. Next, se-
lect "Install the software automatically [Recommended]" and confirm with
"Next".
8. Then, just to be safe, a new system restore point is set. Nothing to be con-
cerned about—this is a standard precaution.
DMX 6Fire USB (English) 5
9. This concludes part 1 of the installation, so click "Finish".
6 DMX 6Fire USB (English)
10. This returns you to the installation wizard, as only the drivers for the USB con-
troller have been installed; now, the drivers that make the controller a USB au-
dio device are installed. Here, too, select "Install the software automatically" to
install the second batch of drivers.
11. Again, you can safely ignore the message that the software did not pass the
"Windows Logo test".
DMX 6Fire USB (English) 7
12. Click "Finish" to complete the installation of the drivers.
Installing the DMX 6Fire USB driver in Windows Vista
1. After you insert the installation CD provided, the AutoStart program starts auto-
matically. If AutoStart does not open, start it manually by double-clicking "Auto-
run.exe" in the CD's root directory. The "Software Installation" button in AutoStart
installs the DMX 6Fire USB driver and the Control Panel in your operating system.
8 DMX 6Fire USB (English)
2. The installation wizard will now display its welcome message.
3. The default destination for the installation is specified in the following window. If
you prefer another folder, select "Browse..." and choose the corresponding direc-
tory. Then, click "Install".
4. The driver is now installed in the system, and as soon as the message below ap-
pears, you can connect the DMX 6Fire USB to your computer's USB 2.0 port using
the cable provided. Windows Vista will automatically recognise the device as new
hardware.
Autres manuels pour DMX 6Fire USB
1
Table des matières
Autres manuels TerraTec Carte son
TerraTec
TerraTec Aureon 7.1 USB Manuel utilisateur
TerraTec
TerraTec Base Series Manuel utilisateur
TerraTec
TerraTec TT Solo 1-NL Manuel utilisateur
TerraTec
TerraTec AUREON 7.1 PCI Manuel utilisateur
TerraTec
TerraTec DMX Manuel utilisateur
TerraTec
TerraTec Aureon 5.1 USB MK II Manuel utilisateur
TerraTec
TerraTec 128I PCI Manuel utilisateur
TerraTec
TerraTec DMX 6fire 24/96 Manuel utilisateur
TerraTec
TerraTec XLerate Manuel utilisateur
TerraTec
TerraTec Aureon 5.1 PCI Manuel utilisateur
TerraTec
TerraTec XLerate Pro Manuel utilisateur
TerraTec
TerraTec AudioSystem EWS 64 S Manuel utilisateur
TerraTec
TerraTec Maestro 3296 Manuel utilisateur
TerraTec
TerraTec DMX Xfire 1024 Manuel utilisateur
TerraTec
TerraTec Aureon 5.1 USB MK II Manuel utilisateur
TerraTec
TerraTec EWX 24/96 Manuel utilisateur
TerraTec
TerraTec Integra128-T Manuel utilisateur
TerraTec
TerraTec WaveTable Manuel utilisateur
TerraTec
TerraTec AudioSystem EWS88 D Manuel utilisateur
TerraTec
TerraTec AudioSystem EWX24 Manuel utilisateur
