TRANSMITTER STATUS DISPLAY
Spectrum Analyzer - Detects congestion in the
area and determines which frequencies are
available to use. Each bar represents a frequency,
and the height represents the amount of congestion
in that frequency.
Status - Displays the current status of your input,
including frequency and frequency information,
camera recording status, temperature, and
amount of linked receivers.
Settings (Menu descriptions listed on pg. 11) - Tap
the button at the top of the screen to customize the
transmitter’s various settings.
RECEIVER STATUS DISPLAY
SNR (Signal to Noise Ratio) - Compare the signal power
level to the noise power level from the attached antennas.
Range Analyzer - Displays the transmission distance
between the transmitter and receiver.
Settings (Menu descriptions listed on pg. 11) - Tap
the button at the top of the display to customize the
receiver’s various settings such as the output format,
audio, display and OSD.
Spectrum Analyzer - Detects congestion in the area and
determines which frequencies are available to use. Each
bar represents a frequency, and the height represents
the amount of congestion in that frequency.
Status - Displays the name, link quality, resolution
and other of your video input.
6
Signal Quality - Determine the quality and reliability
of the signal being received.
LAUNCHPAD APP
2
1
3Navigate to the Bluetooth menu on the transmitter and receiver, then select Enable.
Download the Launchpad App.
Open the Launchpad App from your iOS or Android device, then tap the Ranger
Devices button.
Use the Launchpad App to remotely manage and monitor every parameter of Ranger
including pairing, frequency selection, and 3D LUTs.
Select the device(s) you want to pair or monitor.
4
CONNECT VIA BLUETOOTH
Enable Bluetooth on your iOS or Android device.
5
