Tenmars TM-93 Manuel utilisateur

TM-93

Radiation/RF Strength Meter

User’s Manual

HB2TM930000

Contents

1Introduction......................................................1

2Accessories .....................................................1

3Safety Precaution.............................................1

4Instrument Description.....................................2

5Operation.........................................................3

5.1 Menu setting:...............................................3

5.2 Bright:..........................................................3

5.3 Langrage Select：.......................................4

5.4 Unit Select: ..................................................4

5.5 Alarm Setting:..............................................5

5.5.1 Dose RateAlarm Setting:......................6

5.5.2 RF Strength Alarm Setting:....................7

5.6 Calibration:...................................................8

5.7 Power off:.....................................................8

5.8 Sound:.........................................................9

5.9 Time Record Clear:......................................9

5.10 Information:................................................12

5.11 Reset to factory settings:............................12

6General Specifications ...................................13

7Electrical Specifications..................................15

7.1 Radiation Dose Rate and Dose..................15

7.2 RF Strength................................................15

8Maintenance or Repair...................................16

9Battery Replacement .....................................17

10 Product Disposal............................................17

TM-93

1 Introduction

Radiation dose rate measurement.。

CPS/CPM : Geiger Counter count per second (CPS)

or count per minute(CPM).

RF strength measurement。

Languages : English; Traditional Chinese; Simplified

Chinese; Japanese; Español.

Radiation dose rate alarm setting。

RF strength warning range settings.

Radiation dose rate audible alert measurement。

Calibration factor。

2 Accessories

1 Meter

1 Manual

1 9V alkaline battery

1 Carrying case

3 Safety Precaution

Caution! Please refer to this manual.

Improper use may damage the meter and its

components.

If the case needs to be opened, please avoid

touching the board in order to prevent

accidently touching the DC500V high voltage.

Complies with European Directive.

Do not operate in environments with flammable gas or humid

environments.

Operating altitude: up to 2000M.

Operating environment: Indoor use; Pollution degree 2.

Clean with soft cloth when dirty, such as glasses cloth. Do not

clean with chemicals and other solvents.

EMC: EN61326-1:CISPR 11:Group 1, Class B

TM-93

Class B –Equipment for use in all establishments other

than domestic.

Group 1 –RF energy generated is needed for internal

functioning.

Group 1 –RF energy generated is needed for internal

functioning.

4 Instrument Description

Fig. 2.

1. Color TFT display

2. Power button/setting button

3. Setting button

4. Setting button

5. Mini USB power supply

6. Battery Cover

TM-93

5 Operation

1.Press and hold the button for over 1 second to turn on

the power; the power on screen will be displayed.

2.The power on screen will be displayed for approximately 3

seconds, and then enter the measurement screen.

3.Press the “Hold” button to turn on or turn off the data hold

function. When “Hold” is displayed on the top-left of the

screen, the read value is locked.

4.Press and hold the button for over 3 seconds and the

screen will be highlighted and then it will power off.

5.1Menu setting:

Press the button to enter or exit menu setting.

10 options are displayed on the screen:

Press the button to move to the function to change and

then press the button to enter the next stratum settings;

please refer to 5.2 ~5.11.

5.2Bright setup:

Continuing the operations from 5.1, press the button and

move to the function to change, and then press the

button to save the settings and return to the measurement

screen.

Default:”High”

TM-93

5.3Langrage Select：

Continuing the operations from 5.1, press the button and

move to the function to change, and then press the

button to save the settings and return to the measurement

screen.

Default: ”English”

5.4Unit Select:

1. Continuing the operations from 5.1, press the

button and move to the function to change and enter

the next stratum settings.

2. Press the button and move to the function to

change, and then press the button to save the

settings and return to the measurement screen.

*When Radiation dose is selected, press the button into

3 radiation dose measurement screen.

TM-93

3. Start The Radiation dose:

Press the button to start the dose function; when

measurement is complete, press the button to stop

the dose.

Play

Stop

***Execution of the record function requires the unit to be

turned on for an extended period of time, so the USB power

must be used to execute this function; this function will be

invalid of no external USB power function is connected!

5.5Alarm setting:

Continuing the operations from 5.1, press the button and

move to the function to change; once selected, press the

button to enter the next stratum settings:

Select the radiation dose rate option; please prefer to 5.5.1

Select the RF strength option; please refer to 5.5.2

Default:

0.5μsv/h (start alarm)

0.3μsv/h (green area)

2.0 V/m (start alarm)

0.1 V/m (green area)

Radiation dose alarm adjustable range: 0.30 ~ 40.00μsv/h

RF strength adjustable range: 0.1 ~ 14.0 V/m。

TM-93

5.5.1 Dose Rate Alarm Setting:

1. Continuing the operations from 5.5, press the

button to enter the next stratum enable alarm setting;

select the high value or low value and then press the

button to enter the next stratum setting.

2. Press the button: Number cursor will move towards

the right.

Press the button: Numbers 0~9; the number will

increase.

Press the “ ” button to save the settings and return to

the measurement screen.

3. Enable alarm setting (using high value); using the

measurement range as the datum, it will automatically

determine whether the yellow limit has been exceeded;

when the red area is reached, the alarm will go off!

If the low value set exceeded the high value, press the

button and the high and low values will

automatically be switched around and saved.

TM-93

5.5.2 RF Strength Alarm Setting:

1. Continuing the operations from 5.5, press the

button to enter the next stratum enable alarm setting.

2. Press the “ ” button: Number cursor will move towards

the right.

Press the “ ” button: Numbers 0~9; the number will

increase.

Press the “ ” button to save the settings and return to

the measurement screen.

3. Enable alarm high limit setting; using the measurement

range as the data, it will automatically determine whether

the yellow limit has been exceeded and reached the red

area.

If the low value set exceeded the high value, press the

“ ” button and the high and low values will

automatically be switched around and saved.

TM-93

5.6Calibration:

Continuing the operations from 5.1, press the button and

move to the function to change, and then press the

button to enter the next stratum settings.

Calibration factor adjustable range: 0.01~5.00.

Press the “ ” button:Cursor below the number will move

towards the right.

Press the “ ” button: Numbers 0~9; the number will

increase.

Press the “ ” button to save the settings and return to the

measurement screen.

Default:1.00

5.7Power off:

Continuing the operations from 5.1, press the button and

move to the function to change, and then press the

button to save the settings and return to the measurement

screen. Uses minutes as the unit.

Default:15 minute

Autres manuels pour TM-93

Table des matières

Autres manuels Tenmars Instrument de mesure

Tenmars

Tenmars TM201 Manuel utilisateur

Tenmars

Tenmars TM-731 Manuel utilisateur

Tenmars

Tenmars TM201 Manuel utilisateur

Tenmars

Tenmars TM-741 Manuel utilisateur

Tenmars

Tenmars TM-191 Manuel utilisateur

Tenmars

Tenmars TRIAXIAL ELF Manuel utilisateur

Tenmars

Tenmars TM-190 Manuel utilisateur

Tenmars

Tenmars ST-502 Manuel utilisateur

Tenmars

Tenmars ST-140 Manuel utilisateur

Tenmars

Tenmars TM-190 Manuel utilisateur

Tenmars

Tenmars ST-141 Manuel utilisateur

Tenmars

Tenmars TM-203 Manuel utilisateur

Tenmars

Tenmars TM-101 Manuel utilisateur

Tenmars

Tenmars TM-103 Manuel utilisateur

Tenmars

Tenmars TM-223 Manuel utilisateur

Tenmars

Tenmars TM-197 Manuel utilisateur

Tenmars

Tenmars TM-196 Manuel utilisateur

Tenmars

Tenmars TM-218 Manuel utilisateur

Tenmars

Tenmars TM-213 Manuel utilisateur

Tenmars

Tenmars TM-213 Manuel utilisateur

Tenmars

Tenmars TM-207 Manuel utilisateur

Tenmars

Tenmars TM-183 Manuel utilisateur

Tenmars

Tenmars TM-508A Manuel utilisateur

Tenmars

Tenmars TM-185 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur

Acterna

Acterna MS1400 Manuel utilisateur