Tended V1 Manuel utilisateur
Hub
instruction
booklet
This booklet provides important safety and regulatory
information that should be read before rst use. An
online version is available at tended.co.uk/downloads
Device model
Hub V1
Manufacturer email address
Data notice
Please be aware that anonymous usage data is
gathered during interaction with your Hub. For more
information on why and how this it gathered, please
visit: tended.co.uk/legal/privacy-policy
Health and safety information
To prevent damage to your device, and to reduce
the likelihood of injury or damage, please follow the
precautions below. Further information can be found
at:tended.co.uk/legal
• Only use the supplied charger with your device.
Do not use it if it is damaged, or in the presence
of water.
• The charger is for use with a power supply rated:
5 Volt DC, maximum 1 Amp. Failure to comply
may result in electrical hazard, re, injury, or
damage to the product.
Safety and regulatory guide
• Do not expose the Hub to direct sunlight,
high temperatures or submerge in water. Do not
disassemble, bend, burn, crush or puncture your
device.
If you suspect that contact with water has caused the
device to malfunction, do not dry with an external heat
source.
Waste electrical and electronic equipment
Disposal information: This symbol means
that according to local laws and regulations,
your product and/or its battery shall be
disposed ofseparately from household
waste.
When these products reach their end of life, take
them to a collection point designated by local
authorities or return them to Tended at the address
given on our website: tended.co.uk. The separate
collection and recycling of your products will help
conserve natural resources and ensure that they are
recycled in a manner that protects human health
and the environment. For more information on our
environmental practices, please visit: tended.co.uk
®
Tended was founded to improve safety through
the use of technology.
We’re on a mission to put an end to avoidable
accidents and fatalities to make workplaces safer.
We believe that with technology, preventable
incidents can be a thing of the past.
Our solutions are built around our users. We
always put privacy rst and our technology can’t
be used to track or monitor your location.
UK based Privacy rst Simple solutions
Contents
The Hub 5
Hub attachments 6
Getting started 7
Attaching your Hub 8
Hub specications 9
Troubleshooting 11
5
The Hub
Charging
port
Pairing
button
Wake /
snooze
button
The Hub checks the distance between two or
more devices. It will vibrate to alert you when it
comes within a set distance of others.
6
Hub attachments
Attachment
clip
Release
clip
Lanyard
attachment
Strap loop
ArmLanyardBelt
7
2
1
Once charged, press the
wake/snooze button to
activate ranging.
You can then attach the
Hub to your belt, arm or
lanyard using the strap
provided.
Getting started
These steps will take you through the process of
getting your Hub set up for social distancing.
After receiving your Hub,
unbox it and place on charge
with thecharger provided.
Placing the Hub on charge
will put it into Sleep mode
and it will not detect
otherdevices.
A full charge should take at
least three hours.
8
Attaching your Hub
Use the clip on the back of the Hub to attach to
your belt or waist band.
Belt
To attach to your arm, rst remove the clip on the
back of the Hub. Lift the release clip, pull down to
remove, then slide the strap through the loops.
Arm
9
Hub specifications
Physical features
Dimensions 70 x 90 x 25mm
Weight <150g
Charger weight 12g
Power requirements
Power supply 1 x 5V 1A power adaptor
External power input 1 x micro-USB charging
lead
Charging voltage Max. 5V
Charging current Max. 1A
Charging time
Between 3-6 hours
(assuming correct
charging current)
Battery type 3Ah 3.7V LiPo
Battery life ~ 24 hours active usage
Autres manuels pour V1
1
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Tended Changer
