
User Guide - Tempilot-Multi-use/Single-use Dry Ice Logger
VS Series Temperature Data Logger
MARK
REC
DAY(S)
HR(S)
MIN(S)
REC
STOP
MARK
MARK
REC
MARK
REC
MAX MIN AVG MKT
MARK
MARK
REC
READY
READY
I. Inspecting the Logger
II. Start the Logger
III. Mark and View in Transit
IV. Stop the Logger
V. Get the Reports
START/STOP VIEW/MARK
HS
MARK
REC
START/STOP VIEW/MARK
HS
MARK
REC
USB Interface
View/Mark
Start/Stop
Connect the unit to PC, and the LCD will show the progress % of generating. Once the progress reaches
100% the file generating process is complete, then a flash disk named “Tempilot” will pop up automatically
with data reports. Also via an OTG line user could acquire the reports through an Android Smartphone.
Tempilot (multi) series could monitor the temperature for different applications
which support a minimum temperature of -35℃,-50℃,-100℃,-200℃ respectively.
Without installing any software, end-user could quickly acquire detailed data reports
in both PDF and CSV format.
Single press any button or to wake the device, “READY” means logger is OK for a start.
The battery indicates the power of the logger.
Press and hold “START/STOP” button for more than 4 secs until the “CLOCK”
icon appears then release the button within 2 secs, once see the clock
flashing indicates start successfully. After delay ends, the device will record, and
the LCD will turn to “REC.” automatically.
Press and hold “START/STOP” button for more than 4secs until the “CLOCK” icon appears , then
release the button within 2secs to stop, then LCD will show “STOP” which indicates stop successfully.
Hi: To Start or Stop the device: when hold and press the START/STOP button, a clock will show firstly;
Release the pressing means execute the action. If continue pressing, the clock will disappear shortly
afterwards which means cancel the action.
Hi: Start-delay means a period that device is starting/working but not recording
after delay passed the device will start recording automatically. In other words,
when you see the clock flashing or “REC” both means start successfully.
If the logger doesn’t programme a “start-delay”, the LCD will show “REC.”
directly, which means start successfully and is recording now.
Note: if the logger is not stopped manually, the device will continue to record the data until it is plugged into
a USB port on a PC or until the programmed trip length is reached.
Tempilot loggers provide an option that user could double press “VIEW/MARK” button to mark an event
at any time during the logger recording period; the mark will show in the report, the number beside the
MARK
indicates the times that has marked, the maximum mark is times. This optional function mostly
used for some important events or urgent matters happen.
Single-press “VIEW/MARK” button to check the time has been recorded and the
MIN / MAX / AVG / MKT temperature since recording. (Single-press shows in turn)
The example shows: The logger has been recording 10 days 20hrs 30mins.
Tempilot(H:)
START/STOP VIEW/MARK
HS
MARK
REC
www.etomatoes.com
Data Report
Temp Summary
℃
Share
START/STOP VIEW/MARK
HS
MARK
REC
PDF X
CSV
Hi: Please do not pull off the logger during the process of generating!
Full power, easy using.
Low power, not suggest using, be aware the device
may possibly stop during monitoring.
Empty power, cannot be started.
Device programmed a start-delay:
Device not programmed a start-delay: