TemperZone SAT-1 Instructions de fonctionnement

SAT

SATSAT

SAT-

-1 Thermostat

1 Thermostat1 Thermostat

1 Thermostat

USER'S OPERATING

INSTRUCTIONS

AUTO

HEATER

SUN MON

TUE

WED

THU

FRI

SAT

OFF

ON ERR

UNIT

HEAT

COOL FAN DRY SLEEP

AUTO SWING

ZONE

CONTENTS

Page

Introduction ··········································· 3

Features Summary ································ 3

Display ·················································· 4

Operation ·············································· 5

Remote Control (option) ························ 9

Error Code Display ······························ 10

Troubleshooting ·································· 11

Contact for Serv ce back page

Page 3

Introduction

Your temperzone a r cond t oner s suppl ed w th a SAT-1 wall thermostat. Th s

thermostat has been des gned to ma nta n a h gh level of comfort for room

occupants. Emphas s has been placed on prov d ng controls that are easy to use

desp te the soph st cated m croprocessor system that runs t. Use of the Auto and

T mer funct on sett ngs allows you “to set t and forget t”.

Features Summary

 Cool/Dry/Fan modes.

 Heat/Auto modes (Reverse Cycle Systems only).

 Backl ght ng d splay w th d fferent colour nd cat ng d fferent mode of operat ons.

 Auto/H gh/Med um/Low fan speed select on.

 Temperature sett ng range from 16ºC to 30ºC.

 Room temperature d splay.

 Real t me clock.

 7 days programmable (Start/Stop) t mer that programs the un t to two start/stop

sess ons per day.

 Bypass funct on enables user to bypass the on/off button and any user

programmed t mes for mmed ate operat on of the a r cond t oner.

 Battery backup. In the event of a power fa lure a backup battery w ll ma nta n

the real t me clock and the ntegr ty of the control’s data. When power s

resumed (returned/sw tched on aga n), the un t w ll automat cally restart us ng

the last sett ngs.

 Key lock funct on prevents unauthor zed personnel from chang ng the sett ngs

of the wall thermostat.

 Sleep funct on.

 A r sw ng funct on.

 Zone control (opt on).

 Buzzer beep ng to acknowledge val d key entry or w reless remote handset

recept on.

 Infra red remote controller (opt on).

Page 4

Disp ay

ZONE

Press to select low, med um,

h gh or auto fan speed

Fan speed button

Press aga n to cancel sleep mode

Press once to select sleep mode

Sleep button

Press to select cool,

fan, dry, heat or auto

operat on mode

Mode button

To rece ve w reless handset s gnal

Infra red recept on

Press to act vate on/off

t mer programm ng mode

T mer button To cancel on/off t mer sett ng n

t mer programm ng mode

T mer cancel button

t mer programm ng to adjust t mer sett ng

To adjust the RTC sett ng or used n on/off

T me sett ng button

Sw ng button

Or used n weekly on/off t mer programm ng

to select day of week

To select day of week, Sunday to Saturday

Day button

Room temperature

sett ng button

Press aga n to stop operat on

Press once to start operat on

On/Off button

Error d splay

ERR

D splay error code

Error d splay area

Off t mer

OFF

On t mer

D slay on/off t mer or real t me clock, RTC

T mer d splay area

Key lock

SAT Saturday

WED Wednesday Thursday

THU FRI Fr day

Tuesday

TUE

MON Monday

Sunday

SUN

D splay day of week

Day d splay area

Fan speed d splay

H gh

Med um

Low

Auto fan

Operat on d splay

D splay set or room temperature

Temperature d splay area

SWING

AUTO SLEEP

DRYFAN

COOL HEAT

UNIT

ERR

OFF

SUN MON

TUE

WED

THU

FRI

SAT HEATER

AUTO

DAY

TIME

Page 5

Operation

On/Off

Starting Operation

When the un t s turned off, press the button. The backl ght and the

system are turned on.

Bypass Operation

To act vate the a r cond t oner outs de any pre-set t mes, follow the nstruct ons n

page 7.

Stopping Operation

When the un t s turned on, press the button. The system s turned off.

Room Temperature Adjustment

Normally the d splay w ll show the current room temperature (not the preset

temperature). Set the temperature of your cho ce by press ng the or

buttons. The preset temperature w ll appear.

Each push w ll change the temperature by 1ºC.

Temperature can set w th n the range 16ºC ─ 30ºC.

Dur ng Fan mode, the temperature can not be set.

Mode Se ection

Press the M O D E button to sw tch operat on between Cool, Fan, Dry, Heat and

Auto. The d splay shows wh ch mode s selected at any one t me.

Cool ─ If the room temperature s too warm, the a r cond t oner cools the room

unt l t reaches the set temperature.

Dry ─ If the atmosphere n the room s very hum d or damp, use th s mode to

both reduce the hum d ty and cool unt l the room s near the set temperature.

Heat ─ If the room temperature s too cool, the a r cond t oner warms the room

unt l t reaches the set temperature (reverse cycle systems only).

Auto ─ The a r cond t oner w ll automat cally cool or heat the room unt l t reaches

the set temperature (reverse cycle systems only).

Fan ─ If the atmosphere n the room s stale, use th s mode to c rculate the a r n

the room, w thout chang ng the overall room temperature.

Fan Speed Se ection

Press FAN button to select Auto, H gh, Med um or Low speed.

Auto ─ The SAT-1 w ll automat cally select the most su table fan speed to

ma nta n set temperature.

High, Medium, Low ─ A cho ce of three manually selected fan speeds are

ava lable.

Swing Activation

Th s funct on s only appl cable to systems w th under ce l ng ndoor un ts.

Press button to act vate the a r louver sweep funct on, or to set the louver

at a preferred angle.

Page 6

Time Functions

Setting Cloc

a) Press

TIME

button to enter clock set mode, clock symbol flashes.

b) Press

TIME

button to ncrease or decrease the clock sett ng n 1

m nute. Hold down the button to change the sett ng at a faster speed.

c) Press

DAY

button to change the set day.

Setting 7 Day Timer

The t mer can be set to turn on and off, two sess ons per day, and one regular

sess on per week.

On or Off Timer Setting

a) Press TIMER button to select on t mer or off t mer. If on t mer s selected,

symbol and set day flash ng. If off t mer s selected, OFF symbol and

set day flash ng.

b) There are 2 sess ons of on or off t mer ava lable per day. Press or

button to select sess on 1 (P1) or sess on 2 (P2). The selected sess on s

nd cated on the temperature d splay area as P1 or P2.

c) Press

DAY

button to change the set day of the on or off t mer.

d) If the selected t mer for the set day s empty, t mer d splay area shows

, otherw se the on or off t mer sett ng w ll be shown.

e) Press

TIME

button to change the on or off t mer sett ng. Hold down the

button to change the sett ng at a faster speed.

f) Symbol l ghts up to nd cate there s on or off t mer be ng set.

g) Press CANCEL key to cancel the current on or off t mer be ng set, t mer

d splay area shows .

h) Repeat step a) to e) unt l the des red t mer for each sess on and each day

have been set.

) System w ll save and ex t t mer sett ngs 6 seconds after last key press.

j) In non t mer set mode, hold down CANCEL key for 5 seconds w ll cancel all

the on or off or overr de t mer be ng set.

Page 7

Example:

Two sess ons of on and off t mer per day be ng set as follow:

P1 on t mer

0800

P1 off t mer

1200

P2 on t mer

1300

P2 off t mer

1700

If current t me s 0730 hrs, t w ll rema n as last state. At 0800 hrs, t w ll turn on

the un t us ng P1 on t mer. At 1200 hrs, t w ll turn off the un t us ng P1 off t mer.

At 1300 hrs, t w ll turn on the un t us ng P2 on t mer. At 1700 hrs, t w ll turn off

the un t us ng P2 off t mer.

Press ng on/off button to on/off the un t w ll bypass the control of current event.

The second event w ll take over upon exp ry of current event.

Example: If user turns off the un t at 1000 hrs, t w ll rema n off unt l 1300 hrs, at

wh ch t me control s taken over by t mer P2.

S eep Activation

Press SLEEP button to act vate the sleep opt on. Th s opt on saves energy by

alter ng the set temperature over a two hours per od.

Example uses:

In Summer, before go ng to bed at n ght w th the cool mode set, press ng the

SLEEP button gradually ra ses the set temperature by 2 degrees to compensate

for a person’s lower metabol sm when sleep ng.

In W nter, w th the heat mode set, press ng the SLEEP button gradually lower

the set temperature by 3 degrees to compensate for heav er w nter bedd ng.

The sleep opt on s only ava lable for Cool, Heat and Auto modes.

Zone Contro (option)

If your a r cond t on ng nstallat on has zones nstalled ( .e. dampers), select the

zones to be turned on us ng the appropr ate Zone button. Zone 1 s always

ass gned as master zone. Each zone can be nd v dually turned on or off.

However, zone 1 can only be turned off prov ded there are two other zones

turned on.

Key Lock

Th s feature protects the control be ng tampered w th by ch ldren or unauthor zed

persons.

To act vate, hold down

TIME

and M O D E buttons for 3 seconds, key lock

symbol w ll l ght up.

When the key lock s act ve,

a) button can be used to on or off the system.

b) or button can be used to program the Bypass t mer (refer below).

c) CANCEL can be used to cancel the Bypass t mer.

d) Other buttons are gnored.

Page 8

To cancel the key lock, hold down

TIME

and M O D E buttons for 3 seconds, key

lock symbol w ll no longer be d splayed.

Bypass

Th s feature prov des a qu ck ‘on demand’ alternat ve to the ‘pre-programmed’

type of use. Bypass operat on perm ts the user to start the a r cond t oner

mmed ately, bypass ng the button and any programmed sess on t mes.

Bypass s n t ated by,

a) Hold down or button for 3 seconds, w ll be shown at the

temperature d splay area. Letter “H” nd cates hour sett ng.

b) Press or to set the bypass t mer sett ng anywhere from 0 to 9 hours.

c) Press CANCEL button w ll cancel the bypass t mer sett ng.

d) System w ll ex t from bypass sett ng 3 seconds after last key press.

If Bypass t mer s set, the d splay w ll alternate between temperature and number

of countdown hours left, e.g. 8H and the room temperature. Upon Bypass t mer

countdown reach ng zero:

a) If the On or Off t mer sett ngs are n l, system w ll sw tch off

b) If there s On or Off t mer ava lable, the un t w ll cont nue to operate f the t me

span of the On or Off t mer allows t to be on. At an undef ned reg on or off

t me span, the un t w ll sw tch off.

To term nate the bypass t mer before chosen t me has f n shed, press

button to cancel the sett ng and turn off the a r cond t oner.

Buzzer

Buzzer beeps n response to a val d button press or w reless s gnal recept on. It

beeps tw ce when the system s turned on, otherw se beeps once to all other

val d acknowledgements.

Back ight

Backl ght colour changes accord ng to the operat ng mode sett ng.

Operat ng Mode

Backl ght Colour

Cool Blue

Fan Yellow

Dry P nk

Heat Redd sh orange

Auto L ght v olet

a) The colour changes to red whenever there s system fault. Whenever the fault

s cleared, backl ght colour w ll return to or g nal.

b) If the un t s on, backl ght w ll turn off 30 seconds after the last button press.

c) If the un t s off, any button press w ll turn on the backl ght and the screen

d splay. The backl ght w ll turn off 10 seconds after last button press. Once

the backl ght s turned on, sett ng can be done the same way as when the

system s on.

Page 9

Remote Contro (option)

Operation

A beep w ll sound when the wall plaque rece ves a s gnal from the hand held

nfra red remote control. The IR remote control must be po nted d rectly at the

SAT-1 wall thermostat plaque n order for ts s gnal to be rece ved.

Dry Fan Heat Signal

Fan Speed

Sleep

Swing

Clock

Set Temperature

Cool

Under Fan mode, only low,

medium and high are available.

Under Dry mode, fan peed will be

inhibited and will not be di played.

Fan

Pre thi button will advance

the fan peed a follow :

Auto→Low→Medium→High

Mode

Pre thi button will advance the

mode in the following equence:

Cool→Dry→Fan→Heat→Auto

Adju t Set Temperature

Pre down or up button to

decrea e or increa e the de ired

room temperature.

Note: A temperature can not be

et in Fan mode.

Clock

Pre down or up button for

2 econd to activate. The

current clock etting will

decrea e or increa e at 1

minute interval on each

pre .

The peed of interval

updating increa e after 4

econd of continuou key

pre . It will update at high

peed after 6 econd of

continuou key pre .

Swing

Pre to activate or deactivate

the air louver weep function.

(NB Thi function i only

applicable to y tem with

under ceiling indoor unit ).

Sleep

Pre to activate the energy

aving Sleep function which

automatically adju t the

temperature to provide a

more confortable leep, ie

for u e in bedroom .

On/Off

Pre to witch on or off

the air conditioner.

Page 10

Error Code Disp ay

1. Should there be any fault happen w th the ma n board, the relevant error code

w ll be shown on the error d splay area and symbol ERR w ll l ght up.

2. If there are mult ple faults happening at the same t me, the error codes w ll be shown

one after another.

3. The error codes are:-

Fault Error code Remarks

Room sensor #1 fa lure 1 Ma n board AD3

Room sensor #2 fa lure 2 Ma n board AD4

Room sensor #3 fa lure 3 Ma n board AD5

Room sensor #4 fa lure 4 Ma n board AD6

#1 ndoor co l sensor fa lure 5 Ma n board AD1

#1 outdoor co l sensor fa lure 6 Ma n board AD2

#1 nsuff c ent of refr gerant 7

#1 compressor overload 8

#1 low pressure fa lure 9

#1 h gh pressure fa lure 10

Room sensor #5 fa lure 11 At wallpad B

Room sensor #6 fa lure 12 At wallpad A

All room sensor fa lure 13

Water pump/float sw tch fa lure 14

Low safety thermostat fa lure 15

Commun cat on fa lure 16

Hydron c pump sw tch fa lure 17

Table des matières

Autres manuels TemperZone Thermostat

TemperZone

TemperZone EASY ZONE TOUCH Manuel utilisateur

TemperZone

TemperZone TZT-100 Guide de l'utilisateur

TemperZone

TemperZone CLIMATE TOUCH CTC-1 Mode d’emploi

TemperZone

TemperZone TTS-10 Instructions de fonctionnement

TemperZone

TemperZone TTS-11 Instructions de fonctionnement

TemperZone

TemperZone SAT-3 Instructions de fonctionnement

TemperZone

TemperZone TTS-10 Manuel utilisateur

TemperZone

TemperZone TZT-100 Manuel utilisateur

TemperZone

TemperZone TZT-701 Manuel utilisateur

TemperZone

TemperZone Climate Touch Manuel utilisateur

TemperZone

TemperZone SAT-2 Instructions de fonctionnement

TemperZone

TemperZone TZT-701 Guide de l'utilisateur

Manuels Thermostat populaires d'autres marques

EWELLY

EWELLY EW-181 Manuel utilisateur

Prolon

Prolon T1100 Instructions d'installation

Computherm

Computherm Q20 Manuel utilisateur

Heatmiser

Heatmiser neoStat Manuel utilisateur

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Manuel utilisateur

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manuel utilisateur

Saswell

Saswell SAS920XWHB-7-S-RF Mode d’emploi

Aircalo

Aircalo TFP1-ET85P2 Manuel utilisateur

Honeywell

Honeywell CM721 Manuel utilisateur

Carrier

Carrier DEBONAIR 33CS Manuel utilisateur

Lennox

Lennox iHarmony Zone Thermostat Instructions de montage

Gemtech

Gemtech GT7000 Mode d’emploi

Rollei

Rollei Smartes 45000 Manuel utilisateur

Sinope

Sinope TH1300RF Manuel utilisateur

Honeywell

Honeywell RLV4305 Manuel utilisateur

Honeywell

Honeywell Prestige 2.0 THX9421 Manuel utilisateur

NuTone

NuTone NTBZ48 Instructions d'utilisation d'origine

Stelpro

Stelpro MAESTRO ASMT402AD Manuel utilisateur