Teltonika RUT100 Manuel utilisateur

2 | P a g e

LEGAL NOTICE

or storage of part or all of the contents in this document in any form without the prior written

permission of TELTONIKA Ltd is prohibited. The manufacturer reserves the right to modify the

product and manual for the purpose of technical improvement without prior notice.

Other product and company names mentioned herein may be trademarks or trade names of their

respective owners.

CE COMPLIANCE

This equipment has been tested and found to comply with the limits for a Class B digital device.

CE mark declaration of conformity can be found at Teltonika WEB page www.teltonika.eu

ATTENTION

Before using the device we strongly recommend read this user

manual.

Do not rip the device. Do not touch the device if the device block

is broken or its connecting wires are without isolation.

All wireless devices for data transferring may be susceptible to

interference, which could affect performance.

The device is not water-resistant. Keep it dry.

The device requires high 230V AC voltage.

IMPORTANT NOTES!

It is mandatory to read the notes and manual carefully before starting to use the device.

TECHNICAL SUPPORT CONTACTS

If you face any problems related to the device, which you are not able to solve by yourself, you are

always welcome to address our technical support department by e-mail [email protected]. We will

be very glad to help you.

3 | P a g e

Table of Contents

1SAFETY INFORMATION ........................................................................................................................5

2PRODUCT OVERVIEW............................................................................................................................6

2.1 Introduction .............................................................................................................................................6

2.2 Package contents .....................................................................................................................................6

2.3 System requirements...............................................................................................................................6

2.4 RUT100, RUT104, RUT105 Hardware, LED's and connections ...................................................7

2.4.1 Back panel......................................................................................................................................7

2.4.2 Front panel ....................................................................................................................................7

2.5 RUT110 Hardware, LED's and connections ......................................................................................8

2.5.1 Back panel......................................................................................................................................8

2.5.2 Front panel ....................................................................................................................................8

3GETTING STARTED.................................................................................................................................9

3.1 Initial setup...............................................................................................................................................9

3.2Router installation guide.........................................................................................................................9

4ROUTER CONFIGURATION.............................................................................................................. 10

4.1 Connect to router WEB configuration page using wired connection.......................................... 10

4.2 Connect to router WEB configuration page using wireless connection...................................... 11

4.3 WEB configuration page interface structure.................................................................................... 12

4.4 Quick Setup........................................................................................................................................... 13

4.5 Status...................................................................................................................................................... 15

4.5.1 System Information................................................................................................................... 15

4.5.2 Hardware information .............................................................................................................. 16

4.5.3 ARP table.................................................................................................................................... 16

4.5.4 DDNS ......................................................................................................................................... 16

4.6 Configuration........................................................................................................................................ 17

4.6.1 Mobile Network Settings.......................................................................................................... 17

4.6.2 Network Settings ....................................................................................................................... 18

4.6.3 Wireless Settings ........................................................................................................................ 19

4.6.3.1 Country code......................................................................................................................... 19

4.6.3.2 Basic wireless settings .......................................................................................................... 19

4.6.3.3 Advanced wireless settings.................................................................................................. 19

4.6.3.4 Wireless security ................................................................................................................... 20

4.6.3.4.1 Wireless security with WEP 64/128bit .................................................................. 21

4.6.3.4.2 Wireless security WPA/WPA2 with pre-shared key............................................ 21

4.6.3.4.3 Wireless security with the RADIUS authentication ............................................. 21

4.6.4 Dynamic DNS Settings............................................................................................................. 22

4.6.5 Port forwarding.......................................................................................................................... 23

4.6.5.1 DMZ............................................................................................................................................ 24

4.6.6 Service ......................................................................................................................................... 25

4.6.6.1 SSH......................................................................................................................................... 25

4.6.6.2 HTTP..................................................................................................................................... 25

4.7 VPN ....................................................................................................................................................... 26

4.7.1 OpenVPN (site to site )............................................................................................................ 26

4.7.1.1 Server configuration............................................................................................................. 27

4.7.1.2 Client configuration ............................................................................................................. 27

4.7.1.3 Static authentication key...................................................................................................... 28

4.7.2 GRE Tunnel............................................................................................................................... 29

4.7.3 IPsec ............................................................................................................................................ 30

4.7.3.1 Manual IPsec Key exchange............................................................................................... 31

4.7.3.1.1 Authentication header (AH) settings...................................................................... 31

4.7.3.1.2 Encapsulating Security Payload (ESP) settings..................................................... 32

4.7.3.2 Auto IKE IPsec Key exchange.......................................................................................... 33

4 | P a g e

4.7.3.3 Tunnel keep alive ................................................................................................................. 34

4.8 Admin .................................................................................................................................................... 35

4.8.1 Account....................................................................................................................................... 35

4.8.2 Management ............................................................................................................................... 35

4.8.2.1 RCMS..................................................................................................................................... 35

4.8.2.2 SNMP .................................................................................................................................... 36

4.8.2.3 Clock/NTP ........................................................................................................................... 37

4.8.3 Maintenance ............................................................................................................................... 38

4.8.3.1 Firmware upgrade ................................................................................................................ 38

4.8.3.2 Reboot.................................................................................................................................... 38

4.8.3.3 Factory Defaults ................................................................................................................... 38

4.8.3.4 Troubleshooting file download.......................................................................................... 39

4.9 Tools ...................................................................................................................................................... 40

4.9.1 Site Survey .................................................................................................................................. 40

4.9.2 Ping Reboot................................................................................................................................ 40

5TECHNICAL SPECIFICATION........................................................................................................... 41

6ORDERING INFORMATION.............................................................................................................. 44

6.1 RUT100 HSDPA series....................................................................................................................... 44

6.2 RUT104 HSUPA series....................................................................................................................... 44

6.3 RUT110 HSDPA series....................................................................................................................... 44

6.4 RUT105 HSUPA series....................................................................................................................... 44

1. Appendix A Configuring PC wireless security........................................................................................ 45

7Appendix B Changing router IP address................................................................................................. 47

8Appendix C Updating router firmware.................................................................................................... 48

9Appendix D Accessing RUT from the WEB ......................................................................................... 50

10 Appendix E SIM card public or private IP address............................................................................... 51

5 | P a g e

1 SAFETY INFORMATION

In this document you will be introduced how to use 3G Mobile Router safely. We suggest you

to adhere to following recommendations to avoid any damage to person or property.

You have to be familiar with the safety requirements before starting to use the device!

3G Mobile Router is used to provide a mobile Internet access using a GSM network. To avoid burning

and voltage caused traumas, of the personnel working with device, please follow these safety

requirements.

Device requires power supply source that satisfies all safety

requirements listed in LST EN 60950-1 standard. Each power

supply source should not exceed 15VA.

The PC and power supply source, to which the device is

connected, should satisfy LST EN 60950-1 standard. The device

can be used on first (Personal Computer) or second (Notebook)

computer safety class.

Disconnect device from power supply before mounting to avoid

voltage effect!

Do not mount or serve device during a thunderbolt.

To avoid mechanical damages of the device it is recommended to transport the device packed

in damage-proof pack. While using the device, it should be placed so, that its indication LED would be

visible as they inform in which working mode the device is and if it has any working problems.

Protection against over currents, short circuits and earth faults should be provided as a part of

the building installation. Two pole protective device is required to protect from short-circuit and earth

false. The power of connected device should satisfy power of release device. To disconnect the device

plug off AC/DC power adapter from the wall outlet or power strip. The interstice between contacts

should be no less than 3mm.

Signal level of the device depends on the environment in which it is working. If the device

starts working insufficiently only qualified personnel may repair this product. We recommend to

forward it to repair centre or to manufacturers. No exchangeable parts inside of the device.

6 | P a g e

2 PRODUCT OVERVIEW

2.1 Introduction

Teltonika 3G Mobile Router provides WAN connectivity to wired and wireless clients using the

3G cellular data network. It allows multiple users to get IEEE 802.11 compliant connection within

your wireless broadband network with a single 3G data access account and SIM card. 3G Mobile

Router is extremely useful for mobile work teams or emergency crews that need access to the

broadband Internet but have no permanent base. The 3G/IEEE 802.11 router might be an easy

solution to provide Internet connection for commuter vehicles, such as trains or company buses.

Quickly set up a IEEE 802.11 hotspot Internet connection to check email and browse the web or share

files.

2.2 Package contents

RUT100, RUT110, RUT105

RUT104

3G Mobile Router

2 external Wireless LAN antennas

External GSM antenna

Power adapter

CAT5 LAN cable

CD with User Manual

Leaflet “Quick Start Guide”

3G Mobile Router

2 external Wireless LAN antennas

2 External GSM antennas

Power adapter

CAT5 LAN cable

CD with User Manual

Leaflet “Quick Start Guide”

Note: The manufacturer does not supply the SIM card, which is mandatory for setting up a

connection to the GSM network! The SIM card may be purchased from your GSM (mobile) service

provider!

Note: Using a power supply with a different voltage rating than the one included with the

RUT100 will cause damage and void the warranty for this product.

Note: If any of the components is missing or damaged, please contact the retailer or reseller

from which this product was purchased.

2.3 System requirements

A computer with Windows®, Macintosh®, or Linux-based operating systems with a network

connection (wired or wireless).

A web browser Internet Explorer 6.0, Netscape Navigator™ 6.0, Opera 9.0, Mozilla 5.0 or later

versions for configuration.

7 | P a g e

2.4 RUT100, RUT104, RUT105 Hardware, LED's and connections

2.4.1 Back panel

Figure 1. Router back panel view.

1. Wireless LAN antenna connection.

2. GSM antenna connection.

3. Wireless LAN antenna connection.

2.4.2 Front panel

Figure 2. Router front panel view.

1. GSM LED. A solid light indicates data transfer over GSM network.

2. Reset button.

3. Ethernet socket.

4. Ethernet LED. A solid light indicates proper connection of the Ethernet. A blinking light

indicates data transfer.

5. Power LED. A solid light indicates a proper connection to the power supply.

6. SIM card socket.

7. Power supply adapter socket.

8 | P a g e

2.5 RUT110 Hardware, LED's and connections

2.5.1 Back panel

Figure 1. Router back panel view.

WLAN - wireless LAN antenna connection.

Power - power adapter socket.

GSM - GSM antenna connection.

LAN - Ethernet connection.

2.5.2 Front panel

Figure 2. Router top panel view.

GSM –solid light indicates proper connection to GSM network.

WLAN –solid light indicates that the wireless network is turned on.

LAN –solid light indicates proper connection of the Ethernet. A blinking light indicates data transfer.

Power –solid light indicates proper connection to the power supply.

9 | P a g e

3 GETTING STARTED

3.1 Initial setup

3G Mobile Router enables to access network using a wireless connection from virtually

anywhere within the operating range of wireless network. Some things should be considered before

finding place to set up access point:

1. Make sure the power outlet is nearby as the router requires power supply.

2. Keep the access point as central in work area as possible.

3. The number of walls and ceilings between the router and other network devices should be kept

to a minimum as each wall or ceiling probably will reduce adapter’s range from 1-30 meters.

Signal strength and speed fall off with distance.

4. Higher is often better. Set up the router on the top shelf of a bookcase rather than the bottom

one, if it is possible. The antenna usually works best if oriented to point straight up.

5. Building materials make a difference. A solid metal door or aluminum studs may have a

negative effect on range. Try to position access point and computers so that the signal passes

through drywall or open doorways. Materials and objects such as glass, steel, metal, walls with

insulation, mirrors, file cabinets, bricks, and concrete will degrade wireless signal.

6. Keep router away (at least 1-2 meters) from electrical devices or appliances that generate RF

noise.

7. If you are using 2.4GHz cordless phones or other wireless products your wireless connection

may degrade dramatically or drop completely. Make sure your 2.4GHz phone base is as far

away from your wireless devices as possible. The base transmits a signal even if the phone in

not in use.

3.2 Router installation guide

1. Attach Wireless LAN and GSM antennas.

Remove the antenna from its plastic wrapper.

Screw the antenna in a clockwise direction to the back panel of the unit.

Position the antenna upward at its connecting joint. This will ensure optimal reception.

2. Insert the SIM card which was given by your GSM (mobile) service provider.

3. Insert the Ethernet cable into LAN Port if the router will be configured using wired

connection.

4. Connect the power adapter to the socket on the front panel of 3G Mobile Router. Then plug

the other end of the power adapter into a wall outlet or power strip.

Note: SIM card is mandatory for setting up connection to the GSM network. However, the

manufacturer of this equipment does not supply the SIM card. The SIM card can be purchased from

your GSM (mobile) service provider! For APN, user name and password please contact your GSM

(mobile) service provider. The 3G Mobile Router must be powered off while inserting or taking out the

SIM card.

10 | P a g e

4 ROUTER CONFIGURATION

4.1 Connect to router WEB configuration page using wired connection

Step 1 Connect 3G Mobile Router to your PC using LAN cable.

Step 2 Setup Local Area Network adapter on your

computer (Go to Start > Settings > Network Connections

Right click on Local Network Connection select

Properties)

Step 3 Setup the Local Area network adapter’s IP address.

Choose Internet Protocol (TCP/IP) and click Properties.

Setup the Local area network adapter to

Obtain an IP address automatically and

Obtain DNS server address automatically

Note: It is possible to assign manually static IP address within

192.168.0.2 - 192.168.0.254 address range with mask 255.255.255.0,

gateway 192.168.0.1 and DNS server 192.168.0.1.

Step 4 Open the Web browser and type the IP address of the router (Default : 192.168.0.1) and

enter the 3G Mobile Router administrator login details to access the Web management tool:

The default administrator login settings are:

Password: admin01

Note: It is strongly recommended to change the password after the first router configuration.

Step 5 After successful administrator log on you will see the main page of the 3G Mobile

Router Web configuration interface. The device now is ready for configuration.

Autres manuels pour RUT100

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Teltonika Routeur

Teltonika

Teltonika RUT950 LTE Manuel utilisateur

Manuels Routeur populaires d'autres marques

TRENDnet

TRENDnet TEW-722BRM Manuel utilisateur

virtual access

virtual access GW7304-3G-AC Manuel utilisateur

Intellinet

Intellinet 524445 Manuel utilisateur

Kasda

Kasda KW6516 Manuel utilisateur

EnGenius

EnGenius EPG600 Manuel utilisateur

Hawking

Hawking HWRN1A Manuel utilisateur

Four-Faith

Four-Faith F7B30 Manuel utilisateur

D-Link

D-Link DIR-501 Manuel utilisateur

D-Link

D-Link DIR-612 Manuel utilisateur

TP-Link

TP-Link Archer D5 Manuel utilisateur

D-Link

D-Link DSL-G604T Manuel utilisateur

TP-Link

TP-Link TL-WR902AC Manuel utilisateur

D-Link

D-Link DIR-825/AC Manuel utilisateur

Sapido

Sapido BRB72n Manuel utilisateur

NETGEAR

NETGEAR NIGHTHAWK R7000 Manuel utilisateur

D-Link

D-Link GO-DSL-N150 Manuel utilisateur

TRENDnet

TRENDnet TEW-651BR Manuel utilisateur

MikroTik

MikroTik mAP lite Manuel utilisateur