Teltonika RUT200 Manuel utilisateur

https://wiki.teltonika-networks.com/view/QSG_RUT200

QSG RUT200

Main Page > RUT Routers > RUT200 > QSG RUT200

This Wiki page contains the online version of the Quick Start Guide (QSG) for the RUT200 LTE

Router. Here you will find an overview of the various components on the front and back of a

RUT200 device, hardware installation instructions, first login information, device specifications, and

general safety information. It is highly recommended to acquaint yourself with the Quick Start Guide

before using the device. You can also locate a printed version of the Quick Start Guide in the

packaging box of your device.

Contents

• 1 Safety information

- 1.1 General

- 1.2 RF exposure

- 1.3 Operating conditions

- 1.4 Faulty and damaged products

- 1.5 Electrical safety

- 1.6 Product handling

• 2 Front view

• 3 Back view

• 4 Connectors

• 5 Video Quick Start Guide

• 6 Hardware installation

• 7 Configure your computer (Windows)

• 8 Login to device

• 9 SIM card recommendations

Safety information

Before starting operating the device, please review recommendations and precautions to minimize

the possibility of accidents. Safety precautions presented are supplementary and subject to the local

safety regulations. When various operations are executed on the device, the user must fully follow

the safety instructions and recommendations provided with the device.

General

Radio specifications

RF technologies 2G, 3G, 4G, WiFi

Max RF power 33 dBm@GSM, 24 dBm@WCDMA, 23 dBm@LTE, 20 dBm@WiFi

Bundled accessories speciﬁcations*

Power adapter Input: 0.45A@100-240 VAC, Output: 9 VDC, 1A, 4-pin plug

Mobile antenna 698~960/1710~2690 MHz, 50 Ω, VSWR<3, gain** 4 dBi, omnidirectional, SMA

male connector

WiFi antenna 2400~2500 MHz, 50Ω, VSWR<2.5, gain** 5dBi, omnidirectional, RP-SMA male

connector

* Order code dependant.

** Higher gain antenna can be connected to compensate for cable attenuation when a cable is used. The user is

responsible for the compliance with the legal regulations.

RUT200 router must be used in compliance with any and all applicable national and international

laws and with any special restrictions regulating the utilization of the communication module in

prescribed applications and environments.

NCC

-取得審驗證明之低功率射頻器材，非經核准，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。低功率射頻器材之使用不得影響飛航安全及干擾合法通信；經發現

有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。前述合法通信，指依電信管理法規定作業之無線電通信。低功率射頻器材須忍受合法通信或工業、科學及醫療用電波輻射性電機設

備之干擾。

-減少電磁波影響，請妥適使用

Detailed compliance information is available at the following internet address: wiki.teltonika-

networks.com/view/Certificates.

This sign means that is necessary to read the User's Manual before you start using the device.

This sign on the package means that all used electronic and electric equipment should not be

mixed with general household waste.

RF exposure

This device meets the official requirements for exposure to radio waves. This device is designed and

manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by

authorized agencies. The device must be used with a minimum separation of 20 cm from a person’s

body to ensure compliance with RF exposure guidelines. Failure to observe these instructions could

result in your RF exposure exceeding the applicable limits.

External antennas used with RUT200 must be installed to provide a distance of at least 20 cm from

any people and must not be co-located or operated in conjunction with any other antenna or

transmitter.

Any external antenna gain must meet RF exposure and maximum radiated output power limits of the

applicable rule section.

Maximum transmission power

GSM 33 dBm

WCDMA 24 dBm

LTE 23 dBm

WiFi 20 dBm

Operating conditions

Operating temperature: -40° to +75° Celsius

Humidity should be in the range of 10% to 90% (non-condensing). Only use the device in dry

environments.

Out of direct sunlight

Away from heat source, corrosive substances, salts, and flammable gases

Attention: operation outside the permissible range can considerably shorten the service life of the

device.

Faulty and damaged products

Do not attempt to disassemble the device or its accessories.

Only qualified personnel must service or repair the device or its accessories.

If your device or its accessories have been submerged in water punctured or subjected to a

severe fall, do not use until they have been checked at an authorized service center.

Electrical safety

Only use approved accessories.

Do not connect with incompatible products or accessories.

It is recommended to ground devices with grounding terminals before connecting them to

power. Failure to ground appropriately might result in a shock hazard. The cross-sectional

area of the protective grounding conductor should be at least 1mm2.

Product handling

You alone are responsible for how you use your device and any consequences related to its

use.

Use of your device is subject to safety measures designed to protect users and their

environment.

Always treat your device and its accessories with care and keep it in a clean and dust-free

place.

Do not expose your device or its accessories to open flames, lit tobacco products, liquid,

moisture, or high humidity.

Do not drop, throw or try to bend your device or its accessories.

Do not use harsh chemicals, cleaning solvents, or aerosols to clean the device or its

accessories.

Do not paint your device or its accessories.

Do not attempt to disassemble your device (exemptions for devices that require disassembly

for SIM insertion) or its accessories: it does not contain any user-serviceable parts. For safety

reasons, the equipment should be opened only by qualified personnel.

Make sure to use ESD personal protective equipment while the equipment is serviced.

Do not use your device in an enclosed environment where heat dissipation is poor.

Prolonged use in such space may cause excessive heat and raise ambient temperature, which

will lead to the automatic shutdown of your device or the disconnection of the mobile network

connection for your safety. To use your device again after such a shutdown, cool it in a well-

ventilated place before turning it on.

Please check all national laws and local regulations for the disposal of electronic products.

Do not operate the device where ventilation is restricted.

Do not use or install this product near water to avoid fire or shock hazards.

Avoid exposing the equipment to rain or damp areas.

Arrange power and Ethernet cables so that they are not likely to be stepped on or have items

placed on them.

Ensure that the voltage and the rated current of the power source match the device’s

requirements. Do not connect the device to an inappropriate power source.

During a thunderstorm, no operations should be carried out on the device and cables.

The unit must be powered off where blasting is in progress and explosive atmospheres are

present or near medical life support equipment.

Do not leave your device and its accessories within reach of small children or allow them to

play with it. They could hurt themselves or others and could accidentally damage the device.

Your device contains small parts with sharp edges that may cause an injury choking hazard.

Like any wireless device, this device operates using radio signals, which cannot guarantee

connection in all conditions. Therefore, you must never rely solely on any wireless device for

emergency communications or otherwise use the device in situations where the interruption of

data connectivity could lead to death, personal injury, property damage, data, or other loss.

The device may become warm during regular use.

Front view

Back view

Connectors

POWER SOCKET PINOUT

Video Quick Start Guide

Need some help setting up your new Teltonika Networks RUT200 Industrial Cellular Router? Watch

our quick start guide video and follow the step by step instructions to easily set up your new router

for operation.

Hardware installation

Configure your computer (Windows)

1. Ensure the

Wireless

network

connection is

Enabled. Go to

Start — Control

Panel —

Network and

Internet —

Network and

Sharing

Center. Click

on the Change

adapter

settings in the

left panel, then

right-click on

Wireless

Network

Adapter, and

select Enable.

2. Check if IP

and DNS are

obtained

automatically.

Right-click on

Wireless

Network

Adapter and

select

Properties.

Then select

Internet

Protocol

Version 4 and

click

Properties.

3. If not

selected, check

to obtain an

IP address

and obtain

DNS server

address

automatically.

Click OK.

4. Connect to a

wireless

network by

right-clicking

on Wireless

Network

Adapter and

selecting

Connect.

5. Choose the

wireless

network

RUT200 ****

from the list

and click

Connect. Enter

the WiFi

password

located on the

device's label.

1. To enter the

router's Web

interface

(WebUI), type

http://192.168.1.1

into the URL field

of your Internet

browser.

2. When

prompted for

authentication

enter the

username admin

and enter the

password located

on the device

information

label/engraving.

3. After logging

in, you must set a

new password for

security reasons.

You will not be

able to interact

with the router’s

WebUI until the

default password

is changed. The

new password

must consist of a

minimum of 8

characters.

Requirements:

one uppercase

letter, one

lowercase letter,

and one digit.

4. Next, the

Configuration

Wizard will start

to help you set up

some of the

router's main

operational

parameters.

5. Finally, let's

verify the Mobile

signal strength.

Go to the Status

— Network page

and pay attention

to the Signal

Strength

indication.

To achieve the

best signal

conditions and

maximize cellular

performance, try

adjusting the

antennas or

changing the

location of your

device. You can

find information

on signal

strength

recommendations

here.

SIM card recommendations

Before installing the SIM cards, please apply a thin layer of dielectric grease to the SIM card

contacts for devices used in environments with high-vibration levels. This will help avoid

SIM cards losing touch with the SIM slot and prevent unexpected failures.

Industrial Grade SIM cards are recommended for devices requiring a long lifespan used in

environments with extreme temperatures, corrosive or extra humid climates, or hard-to-

reach locations.

Autres manuels pour RUT200

Table des matières

Autres manuels Teltonika Routeur réseau

Teltonika

Teltonika RUT956 Manuel utilisateur

Teltonika

Teltonika RUT905 Manuel utilisateur

Teltonika

Teltonika RUT955 Manuel utilisateur

Teltonika

Teltonika RUT950 Manuel utilisateur

Teltonika

Teltonika FMB002 Manuel utilisateur

Teltonika

Teltonika RUT723 Manuel utilisateur

Teltonika

Teltonika RUT240 Manuel utilisateur

Teltonika

Teltonika WiMAX Manuel utilisateur

Teltonika

Teltonika RUT9 Series Manuel utilisateur

Teltonika

Teltonika RUT955 Manuel utilisateur

Teltonika

Teltonika TMT250 Guide d'installation et d'utilisation

Teltonika

Teltonika RUT955 Manuel utilisateur

Teltonika

Teltonika RUT850 Manuel utilisateur

Teltonika

Teltonika RUT500 Manuel utilisateur

Teltonika

Teltonika RUT955 Manuel utilisateur

Teltonika

Teltonika RUT200 Manuel utilisateur

Teltonika

Teltonika RUT240 Manuel utilisateur

Teltonika

Teltonika RUT950 LTE Manuel utilisateur

Teltonika

Teltonika RUT104 HSUPA Manuel utilisateur

Teltonika

Teltonika RUT9 Series Manuel utilisateur

Teltonika

Teltonika RUT950 LTE Manuel utilisateur

Teltonika

Teltonika RUT850 Manuel utilisateur

Teltonika

Teltonika RUTX08 Manuel utilisateur

Teltonika

Teltonika RUT905 Manuel utilisateur

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité