Telrad CPE8000 Manuel de l'opérateur

Page 1

Outdoor CPE8000

Installation and Configuration Guide V1.0

Page 2

Table of contents

OVERVIEW

................................................................................................................................................4

1.1. USER INTERFACE SPECIFICATION .........................................................................................................4

1.2. LTE INTERFACE SPECIFICATION ...........................................................................................................4

GETTINGSTARTED

.................................................................................................................................4

2.1. PACKING LIST AND CPE UNIT ...............................................................................................................4

2.2. INSTALLING THE EQUIPMENT .................................................................................................................5



Device logic connection

......................................................................................................................5



Installing Outdoor Unit (ODU)

...........................................................................................................6



LED Display

.........................................................................................................................................7

MANAGING CPE DEVICE

......................................................................................................................8

3.1. WEB LOGIN--192.168.0.1 ...................................................................................................................8

3.2. LTE STATUS DISPLAY-OVERVIEW ........................................................................................................8

3.3. LTE CONFIGURATION ..........................................................................................................................10



Radio Settings-ND&S Configure

.....................................................................................................10



APN Setting-Bearer configure

.........................................................................................................10

3.4. ENODEBSELECTION ...........................................................................................................................12



PLMN Selection

.................................................................................................................................12



eNodeB Setting

.................................................................................................................................13

3.5. NETWORK CONFIGURATION ................................................................................................................14



Modify MTU Size

...............................................................................................................................14



Change model from Router to Bridge

............................................................................................15

3.6. SERVICE CONFIGURATION-DMZ SETTING..........................................................................................16

3.7. SYSTEM MAINTENANCE .......................................................................................................................16



Telnet Enable

.....................................................................................................................................16



TR069 Configuration

.........................................................................................................................17



Firmware Upgrade over HTTP

........................................................................................................18



Change Password

.............................................................................................................................19



Load Factory Default

........................................................................................................................19

FAQ AND TROUBLESHOOTING

.........................................................................................................20

Page 3

PLEASE READ THESE SAFETY PRECAUTIONS!

RF Energy Health Hazard

The radio equipment described in this guide uses radio frequency transmitters. Although the

power level is low, the concentrated energy from a directional antenna may pose a health

hazard.

Do not allow people to come in close proximity to the front of the antenna while the transmitter is

operating.

Protection from Lightning

Before connecting this instrument to the power line, make sure that the voltage of the power

source matches the requirements of the instrument. The unit must be standards.

Disposal and Recycling Information

Pursuant to the WEEE EU Directive electronic and electrical waste must not be disposed of

with unsorted waste.Please contact your local recycling authority for disposal of this product.

Reduction of Hazardous Substances

This CPE is compliant with the EU Registration, Evaluation, Authorisation and Restriction

ofChemicals (REACH) Regulation (Regulation No 1907/2006/EC of the European Parliament

and of the Council) and the EU Restriction of Hazardous Substances (RoHS)

Directive(Directive 2002/95/EC of the European Parliament and of the Council).

FCC Notice, USA

The CPE8000 units comply with Part 25 of the FCC rules. Operation is subject to the following two

conditions:

•This device may not cause harmful interference.

•This device must accept any interference received including interference that may cause undesired

operation.

This device is specifically designed to be used under Part 15, Subpart E of the FCC Rules and

Regulations. Any unauthorized modification or changes to this device may void the user’s authority to

operate this device.

Furthermore, this device is intended to be used only when installed in accordance with the instructions

outlined in this manual. Failure to comply with these instructions may also void the user’s authority to

operate this device and/or the manufacturer’s warranty.

The grantee is not responsible for any changes or modifications not expressly approved by the party

responsible for compliance. Such modifications could void the user’s authority to operate the equipment.

Page 4

Overview

The ODU is a high performance 4G LTE outdoor CPE product designed

to enable quick LTE fixed data service deployment to the remote

customers. It provides high data throughput and networking features to

end users who need both bandwidth and quality service in the remote

area.

1.1.

User Interface Specification

Model

Description & User Interface

ODU

- Panel antenna:

B3_7 14dBi, B20 7dBi, B38_40_41 13dBi, B42_43 15dBi

- 1 RJ45 10/100M LAN Port

- PWR, RUN, LAN, SIM, LTE(1-5) LEDs

- 48 VDC PoE supply, ODU Power <10 Watts

- Dimensions: 203 mm (L) × 203 mm (W) × 76.5 mm (D)

- Weight: < 2 Kg

1.2.

LTE Interface Specification

Frequency Bands Band 3_7 / 20 / 38_40_41 / 42_43

Radio Access 3GPP LTE Release9

Operation Mode TDD, 2RX, 1TXD, DLMIMO

Output Power Up to 23 dBm at antenna port

Throughput Category 4

SIM Support SIM card slot

GettingStarted

2.1.

Packing list and CPE Unit

Page 5

Upon receiving the product, please unpack the product package carefully. Each product is shipped with

the following items:

Table 2-1 Packing List

Outdoor CPE Products

Quantity

ODU unit 1

Power adapter 1

Power Line 1

Mounting brackets 1

PC Ethernet Cable 1

If you find any of the items is missing, please contact our local distributor immediately.

CPE Unit：

Unpacking the Equipment Table 2-1 lists all the standard parts that are supplied in your LTE CPE

Unit Installation Package. Please take the time to unpack the package and check its contents

against this list.

2.2.

Installing the Equipment



Device logic connection

For outdoor CPE product, it is suggested that the CPE device be installed in a shaded area to

avoid direct sun light exposure which may cause over heat in certain extreme weather condition.

The CPE should be properly grounded for proper protection against lighting or power surge.

To power on the device, the outdoor CPE must uses a 48V PoE integrated DC power supply

adapter. The power adapters can operate in 90-250V AC range and therefore can be used in

different country. Once the device is powered up, the user should wait for about 2 minutes before

Page 6

the device becomes operational. For CPE with the RUN LED indicator, a slowly flashing light

indicates the system has completed the startup procedure.

To connect PC, LAN switch or other type of IP device to the CPE product, the user should use

standard CAT5 Ethernet cable and connect to the appropriate LAN port. Once connect the CPE

LAN LED indicator should come on.



Installing Outdoor Unit (ODU)

Mounting Bracket::

Header Connection:

Page 7



LED Display

LED

Indicator

Function

Description

PWR Power Indicator Green Color – Device is powered on

RUN System Run Indicator Fast Blinking – Device is rebooting

Slow Blinking – Device is in normal operation

LAN LAN port status Solid Green – LAN port is up

Blinking Green – LAN data activity in progress

SIM SIM Card Indicator Light is on – SIM card state ready.

RF(5LEDs) RF Signal Strength

5 level signal strengths indication by 5 green

LEDs

1 green LED: RSRP<= -118dBm

2 green LEDS: -118 dBm <=RSRP< -105 dBm

3 green LEDS:-105dBm<=RSRP< -95dBm

4 green LEDS:-95dBm<=RSRP< -85dBm

5 green LEDS:-85dBm<=RSRP

Page 8

Managing CPE Device

The ODU supports several management interfaces including TELNET, WEB, and TR-069 for

local or remote managements. However normal end user is only provided with WEB based

access

3.1.

WEB Login--192.168.0.1

It is a preferred to setup the CPE using a Web browser from a local PC connected to device LAN

port. The user should ensure that the connected PC acquired IP address via DHCP from the device.

After IP connectivity is established between the PC and CPE device, the user may launch a Web

browser and specify http://192.168.0.1 in the address bar. A window will pop up requesting

password. Input the user login password and then click the “Log In” button. After successful log on,

the default home page of the WEB GUI interface will appear. Note that the default user password

is “admin123”.

3.2.

LTE Status Display-Overview

Once the user is logged in, the following window LTE Information window will be prompted for

viewing. The page gives quite detailed LTE information including the System Information, the

UL/DL Frequency, the PCI and the Connection status

Page 9

Page 10

3.3.

LTE Configuration



Radio Settings-ND&S Configure

There is a LTE radio button which is used for the user can turn the radio on or off to restart the

LTE module.

The CPE would scan frequency auto as soon as the system has completed the startup procedure,

and you can configure the fixed Frequency manual as follow:

Note: After configure any parameters of the device, you must click the “

Save & Apply

” button to

save the configuration otherwise the configuration will not take effect.



APN Setting-Bearer configure

The Bearer List is design for the operator to configure the APN. You can configure the only one

APN for all the service classes, as follow:

And the operator also can configure two APNs for Manage and data service classes. As follow

picture, the Management Data Class will be transport via the “internet“ network and the Data Traffic

Class will be transport via the “ctlte” network.

Table des matières

Autres manuels Telrad Matériel réseau

Telrad

Telrad BreezeAIR ACE Manuel du propriétaire

Manuels Matériel réseau populaires d'autres marques

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuel utilisateur

Yudor

Yudor YDS-16 Manuel utilisateur

D-Link

D-Link ShareCenter DNS-320L Manuel utilisateur

Samsung

Samsung ES1642dc Instructions d'utilisation

Honeywell Home

Honeywell Home LTEM-PV Instructions de montage

evertz

evertz 7700 Series Manuel utilisateur

D-Link

D-Link ShareCenter DNS-343 Manuel utilisateur

Asante

Asante AsanteBridge 1012 Manuel utilisateur

FireBrick

FireBrick FB2700 Manuel utilisateur

Audiovox Electronics

Audiovox Electronics ARWH2T Manuel utilisateur

ADC

ADC DSX-1 Manuel

NetComm

NetComm NF2 Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 5620 Manuel utilisateur

Dell EMC

Dell EMC XC6420 Series Manuel utilisateur

Lanner

Lanner NCA-1020A Manuel utilisateur

Allied Telesis

Allied Telesis AT-TN121-A Manuel utilisateur

Arista

Arista CCA-ETM-Q12 Manuel utilisateur