Telic SBC3 CAN 4G Manuel utilisateur

SBC3 CAN 4G User Manual

04.12.2019

Contents

1General Terms and Conditions............................................................................. 2

1.1 General Information .................................................................................................................................................2

1.2 Contact ..........................................................................................................................................................................2

1.3 Conventions used in this Manual........................................................................................................................3

2Safety ............................................................................................................................. 3

2.1 Audience and Intended Use..................................................................................................................................4

2.2 General Safety Information....................................................................................................................................4

2.3 Precautions...................................................................................................................................................................4

2.4 ESD protection............................................................................................................................................................5

2.5 General Battery Handling.......................................................................................................................................5

2.6 Battery Storage...........................................................................................................................................................6

2.7 Battery Disposal .........................................................................................................................................................6

3Product Description.................................................................................................. 6

3.1 Identification (label to be modified) ..................................................................................................................7

3.2 Technical features......................................................................................................................................................7

3.3 Functional Overview.................................................................................................................................................8

3.4 Wiring description.....................................................................................................................................................9

3.5 Wiring the SBC3 CAN 4G to the asset or vehicle.......................................................................................13

3.6 Delivery Content and Accessories....................................................................................................................13

4Operating Set up .....................................................................................................14

4.1 Operating the device.............................................................................................................................................14

4.2 Insert the SIM Card ................................................................................................................................................15

4.3 Switching the device On/Off..............................................................................................................................16

5Status indicators ......................................................................................................18

6Connect to the vehicle...........................................................................................19

6.1 Placing the device into the vehicle..................................................................................................................19

6.2 Wiring connection..................................................................................................................................................19

7Configuring a device..............................................................................................20

7.1 Basic event types ....................................................................................................................................................20

7.2 Power modes............................................................................................................................................................20

7.3 Basic configuration ................................................................................................................................................21

8Connection to Kentaur ..........................................................................................24

8.1 Connecting the device to Kentaur...................................................................................................................24

8.2 Dashboard Guide....................................................................................................................................................25

9Troubleshooting hints ...........................................................................................36

SBC3 CAN 4G User Manual - Telic AG

Pg 2

1General Terms and Conditions

All information in this documentation has been carefully assembled and checked, but should not be

considered as a guaranteed feature set. The copyright of the related documentation is with Telic AG.

The Telic Logo and the terms Telic, and Telic SBC3 CAN 4G are brands of Telic AG.

All further names and terms used can be brands or registered brands of their respective owners.

Telic reserves the right to change the included information without notice and doesn’t take

responsibility for errors in the document and/or missing information.

1.1 General Information

This Installation Manual consists of the following chapters:

Chapter

Description

General Information provides basic information such as the conventions for the warning

levels, applicable related documentations, and contact information.

Safety addresses the audience for this manual, the indented use of this device and

safety-related information important to read before using the device.

Product Description provides a brief overview about the functions and features of the

device as well as the available accessories.

Operation Setup guides you with detailed step-by-step-procedures through the process

of commissioning the device.

Status Indicators describes the different LED status.

Connect to the Vehicle provides important instructions about how to install the device

within the vehicle.

Configuring the Device explains how to configure the device for its proper working.

Connection to Kentaur explains how to connect the device to Kentaur and provides an

overview of Kentaur’s graphical interface.

Troubleshooting Hints provides solutions to issues that may occur during operation

setup and active use of the device.

1.2 Contact

Support Hotline

If you need specific technical support, please submit a request at the following link:

https://www.telic.de/en/contacts/support-request.

SBC3 CAN 4G User Manual - Telic AG

Pg 3

1.3 Conventions used in this Manual

The following conventions for warning levels are used in this manual:

Warning

Warnings against hazards that may result directly in serious injuries or death

in case of non-observance.

Caution

Warnings against hazards that may result in injuries in case of non-observance.

NOTICE

Warnings against hazards that may result in material damage in case of non-observance.

Indicates that the device can be damaged by electrostatic discharge.

This note contains helpful suggestions or references to material not covered in

the document.

2Safety

This device has been designed in accordance with state-of-the-art standards, manufactured with

utmost care using high-quality materials, and tested. Nevertheless, its use may constitute a risk to

persons or cause material damage.

The following safety instructions must be followed in order to ensure the safety of users and the

device.

If these instructions are ignored, Telic will not assume responsibility for any damages that are

incurred.

SBC3 CAN 4G User Manual - Telic AG

Pg 4

2.1 Audience and Intended Use

The device enables telematics and logistic service providers to track vehicles or other assets with an

external power source 9e.g. trailers), and is designed for installation inside and outside the vehicle. Any

other use is not indented.

2.2 General Safety Information

Caution

Read all enclosed instructions and information.

Observe the warnings included in the documentation.

It must only be used by persons being aware of the risks and dangers involved in

operating it.

2.3 Precautions

Caution

Negative consequences on safety and device integrity due to connecting

the wrong cable to the unit.

Only use cables which are listed in the Telic accessory list.

NOTICE

The messages of the device are transmitted via the mobile network. Therefore you need a

standard 3 Volts or 1.8 Volts SIM card.

NOTICE

Take care that the housing covers fit together tightly and properly, and that the rubber

gasket is still in place.

Check that the clear plastic light guides are located above the LEDs.

NOTICE

Be careful not to over tighten the screws as it will damage the casing and could lead to a

reduction in the effectiveness of the environmental protection of the housing:

Min. torque M = 1,2 Nm

Max. torque M = 1,5 Nm

SBC3 CAN 4G User Manual - Telic AG

Pg 5

NOTICE

When using screws for mounting the device onto to the object to the tracked, we

recommend using screws with thread M6 and a minimum length of 30 mm. Please note

that the actual length of the screws depends on the underlying object’s material!

2.4 ESD protection

An electrostatic discharge (ESD) is the transfer of charge between two electrically charged objects with

different electrical potentials either caused by contact or short circuit. If you are charged, for example

due to walking on a carpeted room, you generate static electricity that can damage the PCB.

Therefore, take proper measure for ESD protection, e.g. electrical connection of the body to the

ground, to make sure you do not destroy internal electronics.

Electrostatic discharge (ESD)

The internal electronics of the device can be damaged.

Take proper measures for ESD protection, e.g., electrical connection of the body to

ground.

Repair of ESD damages caused by user’s negligence will not be covered by Telic’s warranty.

2.5 General Battery Handling

The device includes a rechargeable battery. The battery is designed to represent the highest possible

degree of safety. It may however present a potential hazard if it is abused electrically or mechanically.

This is in most circumstances associated with the generation of excessive heat. In this case the internal

pressure may cause the cell case to rupture. For this reason, the following general guidelines should be

followed when handling the device’s battery:

Caution

Material damage caused by electrical or mechanical abuse.

Do not short-circuit.

Do not over discharge.

Do not incinerate.

Do not expose to temperatures beyond the specified temperature range.

Do not crush or puncture.

Do not open cells, do not disassemble battery packs.

Do not expose contents to water.

Do not connect with false polarity.

Do not weld or solder to the battery’s body.

Only authorized official Telic replacement batteries must be used in the

devices.

SBC3 CAN 4G User Manual - Telic AG

Pg 6



The batteries included with the devices must only be used in the device.

The batteries must never be used in any other device unless specifically

authorized by Telic, including but not limited to other Telic products or

devices.

2.6 Battery Storage

The following guidelines should be followed when storing the batteries:

Do not store batteries in rooms with generally high temperature and high humidity levels. Storage

temperature range: should be below 35 °C, avoid temperatures above 75 °C.

Ensure that storage areas are well ventilated.

Store the batteries in their original packaging materials or in the device itself. This will eliminate

unintentional shorting.

You can store batteries in conductive anti-static bags or foam. Prerequisite: The resistivity of the

material exceeds 1 MΩ.

Batteries should not be placed on or covered with metallic or otherwise conductive material.

Batteries should be stored away from any flammable material in the storage area. Fire extinguishers

for metal fire (class D) are preferred.

Do not attempt to extinguish fires with small amounts of water, sand, or with carbon dioxide

extinguishers.

2.7 Battery Disposal

The disposal or recycling of batteries is regulated by each European country. In each country, the

manufacturers, importers and users are responsible for the proper disposal. The European Community

(EC) has issued two directives, 91/157/EEC and 93/86/EEC. These directives are implemented by each

member country of the EC independently and in a different way. In accordance with these directives,

the batteries do not contain dangerous substances. The reaction products are inorganic and do not

represent environmental risks once the decomposition process is terminated.

3Product Description

This chapter provides an overview about the functions and features of the device.

SBC3 CAN 4G User Manual - Telic AG

Pg 7

3.1 Identification (label to be modified)

On the top side of the device, you will find the type label.

Table 1: Identification label

3.2 Technical features

Cellular / GNSS

LTE Cat M1 / EGPRS

Receiver type: 72-channel GNSS receiver

GPS | GLONASS

GNSS sensitivity: -167 dBm

Positions acquisition time:

-Cold 29 sec

-Hot 1 sec

Position accuracy: 2.5m CEP50

Software

Software Download Over The Air (DOTA) or through RS232 interface

Device-configuration: TCP/IP, RS232, or SMS

FTP configuration file download

Event based wake up: time / motion/ input based

Event-based reporting based on time, duration, distance, course change

Up to 50 rectangular geofence zones

Memory capacity for messages: ~20.000 (only positioning data)

Data transmission modes: TCP/IP or UDP/IP

RS232 transparent mode & support of local RS232-protocols

3-Level Watchdog System

Driver identification for up to 50 IDs

Label

Description

S/N

Serial number

IMEI

International Mobile

Equipment Identity

HW-Rev.

Hardware Revision

Number

CE Verification mark

Disposal in accordance

with European Directive

2002/96/CE

SBC3 CAN 4G User Manual - Telic AG

Pg 8

Hardware Features

Housing: Extremely robust dust – and water protected: IP6K6K ISO 20653 for vehicles

Integrated mobile communication and GNSS antennas

Integrated 3D Accelerometer for Motion detection

Robust SIM card holder (1.8/3V) for Mini SIM cards

Status Indicators: 3 LEDs (Mobile communication; GNSS; Battery)

Approvals: E1; CE

Hardware Interfaces

Power Management (*)

External voltage range: 7V -32V

Battery Capacity: 660 mAh (LiPo)

Battery Safety compliant with IEC 62133 for extended operating temperature range

Typical consumption in sleep Mode (external source): ≤ 1 mA (@12V)

Typical consumption in sleep Mode (internal battery): ≤ 0,14 mA

Hardware Characteristics

Dimensions: 150x65x45 mm

Operating temperature: -30°C to +70°C

Recharging temperature: 0°C to +45°C

Weight: 220 g

(*) The SBC3 CAN 4G begins to operate immediately after receiving main power, even after long non-

operating times, and depleted back-up battery.

3.3 Functional Overview

The picture below gives an overview about the main components and its functions available on the

PCB after opening the upper lid.

Ignition Status (On/Off): 1x

General Purpose Inputs(digital/analogue): 2x, Analog Inputs: 1x

Digital Outputs: 1x

1-Wire: iButton ID key|Temperature Sensor (DS18S20; DS18B20; DS19221)

CAN bus: Configurable CAN; OBD-II; FMS

RS232: 1x peripherals, 1x monitoring/configuration of the device

SBC3 CAN 4G User Manual - Telic AG

Pg 9

Picture 1: Functional Overview

Function

Connectors for power supply and vehicle interfaces

ON/OFF button

Status LEDs (GNSS, Mobile service, Power)

Mobile antenna

SIM card holder

GNSS antenna

Connector for rechargeable battery

Table 2: Device components

3.4 Wiring description

Wiring the connectors has to be performed before closing the lid, and while the device is still switched

off. The bundled cables must pass through the PG holes and then each single wire has to be screwed

inside the desired pins.

All the unused wires have to be isolated in order to avoid dangerous contacts with

metallic/electronic parts once the unit is installed within the vehicle.

Table des matières

Autres manuels Telic GPS

Telic

Telic SBC AVL 4G Manuel utilisateur

Telic

Telic Picotrack Manuel utilisateur

Telic

Telic Picotrack Endurance Primary Manuel utilisateur

Telic

Telic SBC-AVL Power Manuel utilisateur

Manuels GPS populaires d'autres marques

Raven

Raven Cruizer II Manuel

Hama

Hama 53118 Manuel utilisateur

Garmin

Garmin SOUNDER 125 Manuel utilisateur

Garmin

Garmin DEZL 580 Manuel utilisateur

Jigabot

Jigabot EX Manuel utilisateur

Pointer

Pointer Cellocator CelloTrack XT LTE Guide d'installation

Queclink

Queclink GV55LITE Manuel utilisateur

Voxson

Voxson Voxtrack GPS500 Manuel d'instructions

Garmin

Garmin ECHOMAP PLUS Manuel utilisateur

Starcom Systems

Starcom Systems Kylos Compact Manuel utilisateur

Garmin

Garmin 15 H Series Manuel utilisateur

Cobra

Cobra Marine MC 600Ci Manuel utilisateur

Cellocator

Cellocator CelloTrack T Manuel utilisateur

Enfora

Enfora Mini-MT GSM2228UG001 Manuel utilisateur

Magellan

Magellan eXplorist 100 Manuel utilisateur

LTE

LTE G50B Manuel utilisateur

Garmin

Garmin DEZL OTR500 Manuel utilisateur

SkyGolf

SkyGolf SkyCaddie SG1 Manuel utilisateur