Telic SBC-AVL Power Manuel utilisateur

dfdfdsf

SBC-AVL

User Manual Version 2.4

SBC-AVL / SBC-AVL Power

dfdfdsf

Table of Contents

1Overview_________________________________________________________________________ 5

2Applicable Products ________________________________________________________________ 5

3Delivery Content___________________________________________________________________ 6

4SBC-AVL Components_______________________________________________________________ 7

5Operating Set up___________________________________________________________________ 8

5.1 Operating the device ___________________________________________________________________8

5.2 Insert the SIM Card_____________________________________________________________________8

5.3 Close the cover_______________________________________________________________________10

5.4 Powering up the device ________________________________________________________________10

5.4.1 Wiring description____________________________________________________________________________ 11

5.5 LED behavior_________________________________________________________________________12

6Troubleshooting hints______________________________________________________________ 13

6.1 The device cannot connect to a GSM network ______________________________________________13

6.2 The device doesn’t log into the GPRS network ______________________________________________13

6.3 The device doesn’t receive GPS data ______________________________________________________14

7Basic features ____________________________________________________________________ 15

7.1 Event Types _________________________________________________________________________15

7.2 Connection Establishment Procedure _____________________________________________________15

7.3 Event Message Structure _______________________________________________________________15

8Advanced Features ________________________________________________________________ 17

8.1 Geofencing __________________________________________________________________________17

8.2 Roaming alternative configuration _______________________________________________________17

8.3 Input alternative configuration __________________________________________________________17

8.4 Device Watchdogs ____________________________________________________________________17

8.5 GSM Jamming detection feature _________________________________________________________18

8.6 Glonass enabling _____________________________________________________________________18

8.7 1-Wire______________________________________________________________________________18

8.8 CAN Bus (Only for SBC–AVL) ____________________________________________________________18

8.9 RS232 (Only for SBC–AVL Power)_________________________________________________________18

8.10 Additional Features ___________________________________________________________________18

9Connect to the vehicle _____________________________________________________________ 19

9.1 Placing the device into the vehicle________________________________________________________19

9.2 Wiring connection ____________________________________________________________________19

10 Safety __________________________________________________________________________ 20

dfdfdsf

10.1 General Battery handling _______________________________________________________________20

10.2 Battery storage_______________________________________________________________________20

10.3 Battery disposal ______________________________________________________________________21

11 General Terms and Conditions _______________________________________________________ 22

12 Documentation change LOG_________________________________________________________ 23

dfdfdsf

Table Overview

Table 1: The different versions of the SBC-AVL................................................................................................ 5

Table 2: Accessories.......................................................................................................................................... 6

Table 3: Components of SBC-AVL and SBC-AVL Power .................................................................................... 7

Table 4: SBC-AVL Cable Color description ...................................................................................................... 11

Table 5: LED Behaviour................................................................................................................................... 12

Table 6: The device cannot connect to a GSM network................................................................................. 13

Table 7: The device doesn’t log into the GPRS network ................................................................................ 13

Table 8: The device doesn’t receive GPS data................................................................................................ 14

Table 9: Content description .......................................................................................................................... 16

Table 10: Documentation change LOG........................................................................................................... 23

Figure Overview

Figure 1: The button to open the SBC-AVL Housing......................................................................................... 8

Figure 2: How to open the SBC-AVL Housing ................................................................................................... 8

Figure 3: How to insert the SIM Card ............................................................................................................... 9

Figure 4: Where to insert the SIM Card............................................................................................................ 9

Figure 5: How to close the SBC- AVL Housing ................................................................................................ 10

Figure 6: SBC-AVL Cable Pin allocation........................................................................................................... 11

Figure 7: SBC-AVL Connector.......................................................................................................................... 11

Figure 8: Geofencing....................................................................................................................................... 17

dfdfdsf

1 Overview

The SBC-AVL family of products from Telic is an innovative telematics unit offering a wide range of

tracking and monitoring configuration options.

The extremely small form factor combined with high quality performance enables the user to deploy

the SBC-AVL in a variety of applications. The SBC-AVL is designed for deployment in passenger cars,

any type of commercial vehicles, fleets of taxis, rental cars or in public transportation vehicles.

The SBC-AVL is available in the following two variants:

SBC-AVL

SBC-AVL Power

Ideal for advanced track and tracing

applications. In addition to general purpose

inputs and outputs, SBC-AVL supports also 1-

wire and CAN bus interfaces.

Ideal for advanced track and tracing

applications, where also security features are

required, such as a backup battery or GSM

jamming. In addition to general purpose I/Os,

SBC-AVL Power supports also 1-wire and serial

interfaces based on LVTTL.

Table 1: The different versions of the SBC-AVL

2 Applicable Products

This user manual is applicable for the following products:

SBC-AVL

SBC-AVL Power

Part Number

04000

04001

HW Revision

D3f

D4i

D3g

D4j

Serial No.

0404<IMEI>

0406<IMEI>

0405<IMEI>

0407<IMEI>

dfdfdsf

3 Delivery Content

In addition to the SBC-AVL, the following accessories can be part of the shipment, if previously

ordered.

Accessory Name

Order code

Functionality

Picture

Connection cable SBC AVL

16032

Automotive molex cable for

on vehicle installation

Cigarette lighter charger

SBC-AVL

17024

Charger cable for

connecting the device to

the Cigarette lighter

OBD II Power Supply

Cable

17023

2-pin OBD-II connector

cable for power supply

only;

Cable length: 1 m

OBD II CAN Cable

17027

4-pin OBD-II

connector/cable for power

supply + CAN High/Low;

Cable length: 1 m

RS232 Level Shifter

16105

Level shifter from LV-TTL

(3.3V) to RS232 (12V);

Open Wires (VCC; GND;

RS232 Rx &Tx; TTL Rx & Tx);

Cable length: 1 m

1-wire Temperature

Sensor

90029

1-wire Temperature sensor;

Cable length: 7 m;

Temperature range: -55 °C

to +125 °C;

Accuracy: ± 0,5°C (in range -

10 °C to +85 °C)

Table 2: Accessories

dfdfdsf

4 SBC-AVL Components

Feature

SBC-AVL

SBC-AVL Power

Certifications

E1, FCC1

GSM/GPRS

Quad Band

Receiver Type

56-channel GPS engine

GSM Jamming Detection

Yes

Housing

Small & Compact Design

Antenna Connector

Internal

Interface Connector

10-pin Molex

Status Indicators

3 LEDs (GSM; GPS; Battery)

Ignition Status (On/Off)

General Purpose Inputs

Digital Outputs

1x (300 mA max; low side

switch) 2

2x (300 mA max; low side

switch) 3

1-Wire

iButton ID key

Temperature Sensor (DS18S20; DS18B20; DS1921G)

CAN Bus

Configurable CAN; OBD-II;

FMS

RS232 / UART

1x (LVTTL; 3.3V)

USB

Configure & Trace

Configure & Trace

Battery charging

Message Storage Capacity

~ 20000 (location data only)

External voltage range

7V - 32V

Battery Capacity

660 mAh (LiPo)

Typical consumption in

sleep Mode (@12V) -

external source

≤ 0,5 mA

Typical consumption in

sleep Mode (internal

battery)

≤ 0,08 mA

Dimensions

74x49x20 mm

Operating temperature

-30°C to +75°C

Recharging temperature

N/A

0°C to +45°C

Table 3: Components of SBC-AVL and SBC-AVL Power

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause

harmful interference; (2) this device must accept any interference received, including interference that may cause undesired

operation.

Applicable from hardware with serial numbers 0406<IMEI> or higher.

Applicable from hardware with serial numbers 0407<IMEI> or higher. Earlier hardware versions support 1x digital output.

dfdfdsf

5 Operating Set up

The operation set-up of the tracking and tracing module can be realised in few quick steps.

Please take proper ESD protection measures (e.g. electrical connection of the

body to ground) to make sure you don’t destroy internal electronics! Repair of

ESD damages caused by user’s negligence will not be covered by Telic’s

warranty. Electrostatic discharge (ESD) is the sudden and momentary electric

current that flows between two objects at different electrical potentials

normally caused by static electricity.

5.1 Operating the device

Please open the SBC-AVL housing by pushing the button shown here:

Figure 1: The button to open the SBC-AVL Housing

While keeping the button pushed remove the top cover with the other hand as shown. The SIM card

holder can be found under the top cover.

Figure 2: How to open the SBC-AVL Housing

5.2 Insert the SIM Card

A working SIM card from a suitable network provider must be properly inserted in order for the

device to operate correctly.

dfdfdsf

If the SIM card is not PIN free, it has to be ensured that the PIN is set to

“0000”. To speed up the log-in process into the GSM network, the SIM card

should contain no or only a few phone book entries.

The messages of the SBC-AVL are transmitted via the mobile GSM network.

Therefore you need a standard 3 Volts or 1.8 Volts SIM card. Please give

preference to post-paid SIM cards!

The insertion of the SIM card into the SBC-AVL is easy:

Place the device in front of you on the desk such showed in the picture.

Slide the SIM card cover carefully on left.

Figure 3: How to insert the SIM Card

Carefully flip the card reader sideways then up. Now insert the SIM card into the SIM card holder

so that the cut corner matches with the corresponding marking on the SIM card holder. Do not

touch the contacts of the SIM card. If necessary clean the contacts with a soft cloth.

Figure 4: Where to insert the SIM Card

dfdfdsf

When inserted correctly the gold contacts of the SIM card should be facing down.

Flip the SIM card holder back into its original position and slide the lock back on right till it is

locked

If you cannot close the SIM card holder, you may have inserted the SIM card in the wrong

direction

With this step you have finished the SIM card installation

5.3 Close the cover

Please close the SBC-AVL housing by pushing the top cover against the down side until there is no-

more space between the 2 surfaces.

Figure 5: How to close the SBC- AVL Housing

5.4 Powering up the device

The SBC-AVL needs to be connected to a power source (7 –32 volt direct current). It can be powered

by a car battery, a rechargeable battery or a stabilized DC power supply. The USB connector is

available only for tracing and configuration functionalities; in case of the SBC-AVL Power, it can also

be used to charge the internal battery. If the SBC-AVL is connected only to the USB port, without VCC

and GND the GPS and GSM modules will remain switched off, even when the device is connected to

the USB port, it will not go into any kind of sleep mode. The SBC-AVL Power version else is able to

power up GPS and GSM modules also while just connected to the USB port, without main power.

Table des matières

Autres manuels Telic GPS

Telic

Telic Picotrack Manuel utilisateur

Telic

Telic SBC AVL 4G Manuel utilisateur

Telic

Telic SBC3 CAN 4G Manuel utilisateur

Telic

Telic Picotrack Endurance Primary Manuel utilisateur

Manuels GPS populaires d'autres marques

Raven

Raven Cruizer II Manuel

Hama

Hama 53118 Manuel utilisateur

Garmin

Garmin SOUNDER 125 Manuel utilisateur

Garmin

Garmin DEZL 580 Manuel utilisateur

Jigabot

Jigabot EX Manuel utilisateur

Pointer

Pointer Cellocator CelloTrack XT LTE Guide d'installation

Queclink

Queclink GV55LITE Manuel utilisateur

Voxson

Voxson Voxtrack GPS500 Manuel d'instructions

Garmin

Garmin ECHOMAP PLUS Manuel utilisateur

Starcom Systems

Starcom Systems Kylos Compact Manuel utilisateur

Garmin

Garmin 15 H Series Manuel utilisateur

Cobra

Cobra Marine MC 600Ci Manuel utilisateur

Cellocator

Cellocator CelloTrack T Manuel utilisateur

Enfora

Enfora Mini-MT GSM2228UG001 Manuel utilisateur

Magellan

Magellan eXplorist 100 Manuel utilisateur

LTE

LTE G50B Manuel utilisateur

Garmin

Garmin DEZL OTR500 Manuel utilisateur

SkyGolf

SkyGolf SkyCaddie SG1 Manuel utilisateur