QIf any malfunctioning sign is observed, discontinue the use immediately.
NOT try to use the camera when it is malfunctioning. (Ex. No images on the
monitor) In the event of malfunction, turn the power switch of the system OFF
immediately, and remove the camera cable from the camera connector. In such case,
contact us or our dealer/distributor from which you purchased the camera for repair
service.
QIf any foreign object / liquid gets into the camera, discontinue the use immediately.
In the event that liquids, small particles, or any other foreign objects get into the camera,
do NOT try to continue to use the camera. To do so invites a fire or an electric shock
hazard. In that case, turn the power switch of the camera OFF immediately, and remove
the camera cable from the camera connector. After that, contact us or our
dealer/distributor from which you purchased the camera for repair service/technical
advice.
[Do NOT disassemble the camera
Do NOT attempt to pull apart, repair, or modify the camera on your own. To do so leads
to a fire or an electric shock accident. Contact us or the dealer/distributor from which
you purchased the camera for repair/modification.
[Do NOT supply any power other than specified.
The camera is designed to work only under specified voltage. Do NOT attempt to drive
the camera with the power other than specified. Operating the camera under unspecified
power invites a fire or an electric shock hazard.
[Do NOT use the camera in a high-humidity environment.
Do NOT place the camera near a humidifier, or in other high-humidity environment.
To do so may cause a fire or an electric shock accident.
CAUTION
If the camera is operated in the electromagnetic field, there may be cases where beat
noises (vertical, horizontal, or oblique stripes) may appear in the video output. In that
case, take preventive measures on the electromagnetic-wave generating source so that
the camera do not receive the interference by the electromagnetic-wave. Take extra
precautions against electromagnetic-wave-interference if the camera is used with a
servomotor, inverter, or other electromagnetic-wave-generating equipment.
Avoid giving a strong shock against the camera. If your camera is used in the system
where its camera connector is subjected to strong repetitive shocks, the camera
connector is possible to break down. If you intend to use your camera in such a situation,
make sure to use an optional camera-connector-fixing-hardware to connect the
connector-plug to the camera body.
When the camera is not in use, make sure that a lens or lens-cap is put on so that the
image pickup plane of CCD is protected from dust, foreign object, or other flaw-causing
object. If the glass plane (image pickup plane) gets dirty, clean it with a cotton swab.
When it needs to be cleaned with a cleaner, be sure NOT to use any organic solvent other
than ethyl alcohol. As a countermeasure against condensation, when the camera is
moved from a warm place to a cold place, take appropriate precautions to prevent
condensation from forming on the camera.
Do not pull strongly the camera cable nor swing it. The stress from pulling or swinging
may cause damage in the coating of the cable, or breaks in the inside wires.
2
