5
Used as a tripod
Unfold the tripod, extend the Multi Mount to the desired length, and tighten the screws to
secure. Then mount the camera onto the Multi Mount.
Unfold the tripod: With one hand holding the Multi Mount, use the other hand to
unfold the two legs apart.
Fold the tripod: Push the two legs till they are fully folded.
Instructions for Use
The ball head mount adapter is detachable.
It’s recommended to only use the tripod with products that weight less than 300g. If
the mounted device is too heavy, the tripod may tip over, potentially damaging your
device.
Always place the tripod on a flat and stable surface to prevent the mounted device
from tipping over. When using outdoors, also be aware that extending the tripod too
high increases the risk of it falling. Be particularly careful when using it in windy
conditions.
When changing the position of the tripod, please remove the camera first. Strong
vibrations from such movement may cause damage to the mounting plate and/or the
camera.
Please assemble according to the instructions above, do not use the Multi Mount with
any other accessories.
After use, fold the Multi Mount and fully retract the length to store.
