Teleco TIG3000B Manuel utilisateur
TELECO HUB
INSTALLATION GUIDE AND USER MANUAL
GB
2
Teleco Warranty Teleco guarantees its products against faulty materials and/or workmanship.
The TELECO warranty is limited to expense-free replacement or repair of
all those parts TELECO deems faulty. The warranty is applied for a 2-YEAR
period starting from the date of product purchase; nevertheless, it shall only
be deemed valid if the customer can produce a written document stating the
date of purchase (invoice or receipt).
The TELECO warranty does not cover:
a. Damage caused by improper installation and/or use and/or
maintenance
b. Damageresultingfromproductmodicationsthathavenotbeen
authorised by Teleco
c. Damage resulting from the use of spare parts that are not Teleco
originals
d. Damage resulting from repairs carried out by personnel who have not
been authorised by Teleco
e. Normal wear of parts
f. Spare part shipping between the customer and the service centre
g. Damage that may occur during transport:
transport-associated risks are always considered to be the customer’s
responsibility
Information Congratulations on choosing Teleco HUB, the ideal interface with which to
remote-control your camper or caravan accessories via a smartphone using
a simple APP. This handbook has been drawn up to provide information on
thetechnicalspecicationsandhowtoinstall,useandmaintainyourTeleco
HUB:
For additional information, please contact your local dealer or:
TELECO s.p.a.
Via E. Majorana 49
48022 LUGO (RA), Italy
Web site: www.telecogroup.com
After-sales service: 899.899.856
TELECO s.p.a. declines all responsibility for any errors contained in this
manual. All information contained herein is up to date at the time of printing
and in line with the above-mentioned revisions. TELECO s.p.a. reserves
the right to make any changes made necessary by the development of its
products.
3
Contents
List of supplied accessories ....................................................................................................4
Technical characteristics..........................................................................................................4
Indicators and control parts.....................................................................................................5
Installation..................................................................................................................................6
Positioning ..............................................................................................................................6
GSM external antenna (optional) ...........................................................................................6
Connecting to the vehicle battery............................................................................................7
Connection of auxiliary inputs and outputs (optional)..............................................................8
Connection of system-ready Teleco/Telair products (optional)................................................9
Rapid HUB and smartphone conguration.............................................................................11
RapidcongurationoftheBluetoothproximityconnection .....................................................11
RapidcongurationoftheremoteconnectionviaGSM(SMS)...............................................12
HUB and Smartphone detailed conguration.........................................................................15
Bluetooth Connection..............................................................................................................15
Pairing a smartphone for Bluetooth connection ..................................................................15
Deleting the list of smartphones paired for Bluetooth connection .......................................16
GSM connection......................................................................................................................17
Inserting and removing the Micro-SIM card .......................................................................17
ConguringGSMconnection .............................................................................................18
ConguringthenumbersenabledforHUBcontrolviaGSM(SMS)....................................20
Auxiliary controls .....................................................................................................................23
ConguringtheInputs .........................................................................................................24
ConguringtheOutputs ......................................................................................................25
AlarmsandNotications..........................................................................................................26
ConguringtheAlarms........................................................................................................26
CongurationofthetelephonenumberstowhichSMSalarmmessagesaretobesent....27
Tracking...................................................................................................................................30
Troubleshooting ........................................................................................................................31
Recycling: with a view to reducing
disposal of waste electrical and electronic
equipment as much as possible, do not
throw out this end of life appliance together
with other unsorted municipal waste, but
make use of a recycling centre.
4
List of supplied
accessories
The Teleco HUB package contains the following accessories:
1 Teleco HUB control unit (hereinafter referred to as the HUB)
2 Power supply cable
3 Auxiliary inputs lead
4 Auxiliary outputs lead
5 Installation and use manual
Technical
characteristics
• Power supply: 12 Volt (10-15 V DC)
• Max consumption: 300 mA
• SIM Card connector: Micro-SIM card
• Bluetooth-connectible phones: 4
• Auxiliary outputs: 2 clean 10A 250V AC / 30 V DC contacts
• Inputs: 2 digital channels (internal voltage 12 Volt)
• Dimensions: 147x97x35
• Weight: 200g
5
Indicators and
control parts
FIG 1
1 Key
Starts and ends the pairing procedure needed to link the HUB to a mobile device (smartphone, tablet etc.)
using Bluetooth technology
2 Red LED (POWER)
Flashes during HUB start up, on when the HUB is ready to work
3 Green LED (GSM)
On when GSM connection is possible (SMS ok, tracking ok)
Flashes when the GSM connection is partial (SMS ok, no tracking)
4 Blue LED (BLUETOOTH)
Flashesbrieyevery3secondswhentheHUBisabletoconnectviaBluetoothwithoneofthepaired
smartphones; on when a smartphone is connected
Duringthepairingprocedure:asheseverysecondwhentheHUBisreadytopair,ashesrapidlywhen
the paired smartphone list is full.
5 GSM EXT/INT
Commutator to select the internal GSM (INT) or external (EXT) antenna
6 GSM
Connector for GSM external antenna (optional, not included in the order)
7 SIM CARD
Slot for insertion of GSM micro-SIM (optional, not included in the order)
7
4
3
2
1
6
5
6
Installation ■Positioning
To identify the HUB position that gives the best GSM and Bluetooth
reception proceed as follows:
1. Connect the HUB to the vehicle battery and carry out a Bluetooth
pairingwithasmartphone(see«RapidcongurationoftheBluetooth
proximity connection»)
2. Check the GSM reception quality of the HUB by selecting «SMS» from
the TelecoHUB App Menu and checking that GSM signal quality in the
chosen installation position is good.
3. Check Bluetooth reception quality by moving around inside the vehicle
with your smartphone and checking there are no interruptions in Blueto-
oth connection with the HUB
Make sure the Micro-SIM slot remains accessible.
■GSM external antenna (optional)
TheinternalantennaoftheHUBisusuallysufcienttoensuregood
reception.
Should an external antenna be required, please contact your authorised
Teleco partner/dealer as choosing the wrong antenna may worsen signal
reception.
Should you decide to use an external GSM antenna proceed as follows:
1. Lift the plastic lid that protects the GSM connector (Fig. 1)
2. Connect the antenna to the GSM connector
3. Shift the GSM INT/EXT commutator to the “EXT” external position
4. Check GSM reception by using the TelecoHUB App
7
■Connecting to the vehicle battery
1) Connect the BLACK wire of the power supply cable to the NEGATIVE
POLE of the vehicle 12 Volt battery, and the RED wire to the POSITIVE
POLE + (be careful not to invert the + and - poles) using 2 cables of a
cross section of 1 mm2. Protect the positive pole with a 3 A fuse near
the battery terminal.
2) Connect the GREEN wire of the power supply cable to the consensus
of the vehicle ignition console (in many cases such consensus is loca-
ted on Pin 15 in the main terminal board) so that whenever the engine
is started this cable receives a positive + 12 V DC voltage.
If this connection is not made the HUB will not be able to send you an
alarm when the vehicle engine is started.
• Warning
The 3-way power connector
(P) must be inserted in the
POWER V DC socket.
Inserting this connector
in any other socket will
irreparably damage the
board and render the
warranty null and void
Black Red
3A fuse
Green
8
■Connection of auxiliary inputs and outputs (optional)
The HUB places 2 inputs and 2 outputs at the user’s disposal to control
camper equipment/devices.
For example, the inputs could be used to monitor the water and waste water
tanks (Tank full? Tank empty?), or to check if the door and the skylight/
ventilation port are open or closed.
The outputs could be used to switch the lights on and off or to command
unlocking of the camper.
Inputs: 2 digital channels (internal voltage 12 Volt)
1) Connect the IN1 wires of the Auxiliary Input Lead to the
rstinputyouwishtocontrol.
2) Connect the IN2 wires of the Auxiliary Input Lead to the
ends of the second input you wish to control.
Outputs: 2 10A 250 V AC / 30 V DC relays
Common (COM.), Normally Closed (N.C.) and Normally
Open (N.O) contacts are available for every output
1) Use the Auxiliary Output Lead to carry out
connections on the basis of the equipment to be
controlled.
Example:
Magnetic contact for
doors and windows
Example:
Water tank level
indicator
Example: Door lock
Example: Light
Note: IN1- and IN 2- are internally connected to the negative pole of the control center power supply.
9
■Connection of system-ready Teleco/Telair products (optional)
The HUB allows you to control - with a smartphone - satellite antennas, air
conditioners and power generators that are ready for use with the Teleco
HUB.
●Satellite antenna:
Using a HUB-Bus cable (not included in this order) connect the “SAT
ANTENNA” connector of the HUB to the “Teleco HUB” connector of the IFS
Antenna interface
Compatible satellite antenna models:
• All FlatSat systems starting from serial number 1401560001 (year of sale 2014)
• All InternetSat systems starting from serial number 1401B20001 (year of sale 2014)
• All TeleSat systems starting from serial number 1401A40001 (year of sale 2014)
Not compatible with Elegance and Komfort models.
Note:theantennacontrolunitsmustbeprogrammedwithrmwareinversion70orlater(U70,C70,T70etc.).
Connection with the HUB occurs via the IFS interface.
●Air conditioner:
Using a HUB-Bus cable (not included in this order) connect the “CLIMA”
connector of the HUB to the “Teleco HUB” connector of the ICL Clima
interface
Compatible models: SILENT 5400H-7400H-8400H and DUALCLIMA 8400H-12400H
Connection with the HUB occurs via the ICL interface
IFS
ICL
10
●Power generator:
Using a HUB-Bus cable (Teleco code...: not included in this order)
connect the “GENERATOR” connector of the HUB to the RJ11 connector
at the rear of the panel of compatible generators
Compatible models: TIG3000B, TIG3000G, TIG3000D
Note: All the products connected to the HUB must have the same earth reference.
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels Teleco Changer
