Tektronix YT-1 Manuel utilisateur

The test & measurement

equipment you need at

the price you want.

Alltest carries the world’s largest selection of

used/refurbished benchtop test & measurement

equipment at 50% the price of new.

Our equipment is guaranteed working, warrantied, and

available with certified calibration from our in-house staff

of technicians and engineers.

• 10+ full time technicians with over 150 years of

specialization

• 90 day warranty & 5 day right of return on all

equipment

•

• 1-3 year warranties for new and

premium-refurbished equipment

• Every unit tested to OEM specifications

• Satisfaction guaranteed

You have plans, we will help you achieve them.

Any project. Any budget.

Get a quote today!

CCall (732) 919-3339 or email sales@alltest.net.

Alltest Instruments, Inc.

500 Central Ave.

Farmingdale, NJ 07727

P: (732) 919-3339

F: (732) 919-3332

alltest.net

sales@alltest.net

Instruction Manual

YT-1 / YT-1S

Chart Recorder

070-9947-00

ST905-AD-MMC-010

0910-LP-024-4850

NOTE: This manual is intended for YT-1/YT-1S

Chart Recorders serial numbers B030500 and

higher, or units that have been upgraded to that

level (to identify upgrade, see page 8-5 and note

frame cutout next to print head). For instruments

with serial numbers B030499 and lower that have

not been upgraded, please contact your local

Tektronix Customer Service Representative for

information regarding module exchange service.

First Printing: Oct. 1998

Tektronix products are covered by U.S. and foreign patents, issued and

pending. Information in this publication supercedes that in all

previously published material. Specifications and price change

privileges reserved.

Printed in the U.S.A.

Tektronix, Inc., P.O. Box 1000, Wilsonville, OR 97070–1000

TEKTRONIX, TEK, and YT-1 / YT-1S are registered trademarks of

Tektronix, Inc.

WARRANTY

Tektronix warrants that this product will be free from defects in materials and

workmanship for a period of one (1) year from the date of shipment. If any such

product proves defective during this warranty period, Tektronix, at its option,

eitherwillrepairthedefectiveproductwithout chargefor parts andlabor,orwill

provide a replacement in exchange for the defective product.

Inordertoobtainserviceunderthiswarranty,CustomermustnotifyTektronixof

the defect before the expiration of the warranty period and make suitable

arrangements for the performance of service. Customer shall be responsible for

packagingandshippingthedefectiveproducttotheservicecenterdesignatedby

Tektronix,withshippingchargesprepaid.Tektronixshallpayforthereturnofthe

product to Customer if the shipment is to a location within the country in which

theTektronixservicecenteris located. Customershallberesponsible for paying

allshippingcharges,duties,taxes,andanyotherchargesforproductsreturnedto

any other locations.

Thiswarrantyshallnotapplytoanydefect,failure,ordamagecausedbyimproper

use or improper or inadequate maintenance and care. Tektronix shall not be

obligatedtofurnishserviceunderthiswarrantya)torepairdamageresultingfrom

attempts by personnel other than Tektronix representatives to install, repair, or

service the product; b) to repair damage resulting from improper use or

connection to incompatible equipment; or c) to service a product that has been

modifiedorintegratedwithotherproductswhentheeffectofsuchmodificationor

integration increases the time or difficulty of servicing the product.

THIS WARRANTY IS GIVEN BY TEKTRONIX WITH RESPECT TO

THIS PRODUCT IN LIEU OF ANY OTHER WARRANTIES,

EXPRESSED OR IMPLIED. TEKTRONIX AND ITS VENDORS

DISCLAIM ANY IMPLIED WARRANTIES OF MERCHANTABILITY

OR FITNESS FOR A PARTICULAR PURPOSE. TEKTRONIX’

RESPONSIBILITY TO REPAIR OR REPLACE DEFECTIVE

PRODUCTS IS THE SOLE AND EXCLUSIVE REMEDY PROVIDED

TO THE CUSTOMER FOR BREACH OF THIS WARRANTY.

TEKTRONIX AND ITS VENDORS WILL NOT BE LIABLE FOR ANY

INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL

DAMAGES IRRESPECTIVE OF WHETHER TEKTRONIX OR THE

VENDOR HAS ADVANCE NOTICE OF THE POSSIBILITY OF SUCH

DAMAGES.

YT-1 / YT-1S Chart Recorder v

Table of Contents

General Safety Summary

Operator Safety Summary vii. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Service Safety Summary viii. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Installation and Repacking

Unpacking and Initial Inspection ix. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Power Source and Power Requirements ix. . . . . . . . . . . . . . . . . . . . . . .

Repacking for Shipment ix. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Operating Instructions

Instructions for Use 1-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Paper Replacement 1-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

General Information and Specifications

Product Description 2-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Standards, Documents, and References Used 2-1. . . . . . . . . . . . . . . . . . .

Characteristics and Specifications 2-1. . . . . . . . . . . . . . . . . . . . . . . . . . . .

Operator Performance Checks

Head Alignment Chart Diagnostic and Chart Quality 3-1. . . . . . . . . . . . .

Accessories and Options

Standard and Optional Accessories 4-1. . . . . . . . . . . . . . . . . . . . . . . . . . .

Options 4-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Theory of Operations

Introduction 5-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Circuit Description 5-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Individual Write Command Operation 5-3. . . . . . . . . . . . . . . . . . . . . . . . .

Individual Read Command Operation 5-5. . . . . . . . . . . . . . . . . . . . . . . . .

Protocol 5-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Interface Information 5-6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Calibration

LCD Chart Diagnostic 6-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Performance Check 6-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Table of Contents

vi YT-1 / YT-1S Chart Recorder

Maintenance

Required Tools 7-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Preventive Maintenance 7-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Part Removal/Replacement 7-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Troubleshooting 7-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Mechanical 7-8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Electrical 7-9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Shipping Instructions 7-13. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Replaceable Parts

Parts Ordering Information 8-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Electrical Replaceable Parts 8-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Mechanical Replaceable Parts 8-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Exploded View Diagram 8-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

YT-1 / YT-1S Chart Recorder vii

General Safety Summary

CAUTION. Do not operate this product without paper installed, or, if

operating when the paper runs out, shut the power off immediately.

Printing without paper might burn out the printhead.

Operator Safety Summary

Power Sources

This product is intended to operate from a power source supplied by

the parent instrument. Do not attempt to power this module by any

other means.

Grounding the Instrument

This product is grounded through the parent instrument. A protective

ground connection is essential for safe operation.

Danger Arising From Loss of Ground

Upon loss of the protective-ground connection, all accessible

conductive parts (including knobs and controls that appear to be

insulating) can render an electric shock.

Refer to connector changes to qualified service personnel.

Do Not Operate in Explosive Atmospheres

To avoid explosion, do not operate this product in an explosive

atmosphere unless it has been specifically certified for such

operation.

General Safety Summary

viii YT-1 / YT-1S Chart Recorder

Do Not Remove Covers or Panels

To avoid personal injury, do not remove the product covers or panels.

Do not operate the product without the covers and panels properly

installed.

Service Safety Summary

CAUTION. For qualified service personnel only. Refer also to the

preceding Operator Safety Summary.

Do Not Service Alone

Do not perform internal service adjustment of this product unless

another person capable of rendering first aid and resuscitation is

present.

Use Care When Servicing With Power On

Dangerous voltages exist at several points in this product. To avoid

personal injury, do not touch exposed connections and components

while power is on.

Disconnect power before removing protective panels, soldering, or

replacing components.

YT-1 / YT-1S Chart Recorder ix

Installation and Repacking

Unpacking and Initial Inspection

Before unpacking the YT-1/YT-1S from its shipping container or

carton, inspect for signs of external damage. If the carton is

damaged, notify the carrier. The shipping carton contains the basic

instrument and its standard accessories. Refer to the replaceable parts

list for a complete listing.

If the contents of the shipping container are incomplete, if there is

mechanical damage or defect, or if the instrument does not meet

operational check requirements, contact your local Tektronix Field

Office or representative. If the shipping container is damaged, notify

the carrier as well as Tektronix.

The instrument was inspected both mechanically and electrically

before shipment. It should be free of mechanical damage and meet or

exceed all electrical specifications. Procedures to check operational

performance are in the parent instruction service manual. Procedures

to check electrical and mechanical specifications are in the

Calibration section of this manual.

Power Source and Power Requirements

The YT-1/YT-1S is intended to be operated from the parent

instrument’s power supply. A protective ground connection by way

of proper installation in the parent instrument is essential for safe

operation.

Further information on the YT-1/YT-1S power requirements can be

found in the Operator Safety Summary and in the Operator section.

Repacking for Shipment

If the YT-1/YT-1S is to be shipped to a Tektronix Service Center for

service or repair, attach a tag showing the name and address of the

owner, name of the individual at your firm that can be contacted,

complete serial number, and a description of the service required. If

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Tektronix Instrument de mesure

Tektronix

Tektronix TLA5202 Manuel utilisateur

Tektronix

Tektronix 1L40 Manuel utilisateur

Tektronix

Tektronix 1401A Manuel utilisateur

Tektronix

Tektronix TLA7016 Instructions d'installation et d'entretien

Tektronix

Tektronix TTR500 series Manuel du produit

Tektronix

Tektronix OI tek P5200A Series Manuel

Tektronix

Tektronix RSA3408 Manuel utilisateur

Tektronix

Tektronix P7260 Manuel utilisateur

Tektronix

Tektronix CSA7404B Manuel utilisateur

Tektronix

Tektronix DSA8300 Manuel d'utilisation et d'entretien

Tektronix

Tektronix P6248 Manuel utilisateur

Tektronix

Tektronix TLA715 Series Manuel utilisateur

Tektronix

Tektronix KEITHLEY 3765 Manuel utilisateur

Tektronix

Tektronix P6021 Manuel utilisateur

Tektronix

Tektronix RSA5100B series Manuel utilisateur

Tektronix

Tektronix TLA6400 Series Manuel d'utilisation et d'entretien

Tektronix

Tektronix 1L30 Manuel utilisateur

Tektronix

Tektronix P6022 Manuel utilisateur

Tektronix

Tektronix PRISM MPI2-10 Manuel utilisateur

Tektronix

Tektronix RSA306B Manuel

Tektronix

Tektronix Keithley SourceMeter 2410 Manuel utilisateur

Tektronix

Tektronix P6405 Manuel utilisateur

Tektronix

Tektronix 2715 Manuel utilisateur

Tektronix

Tektronix WFM2300 Guide de l'administrateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur