Tektronix RSA306 Manuel utilisateur

General safety summary Review the following safety precautions to avoid injury and prevent damage to

this product or any products connected to it.

To avoid potential hazards, use this product only as speciﬁed.

Only qualiﬁed personnel should perform service procedures.

To avoid damage to

equipment and personal

injury

Do not exceed rackmount weight ratings. Use this rackmount kit only for

RSA306B and RSA306 instruments and instrument controllers.

If you install an instrument controller in the area behind the mounted

instrument(s), weight and environmental restrictions apply.

In a static environment (such as an ofﬁce or manufacturing facility), the total

additional weight should not exceed 5 lbs (2.27 kg).

In a dynamic environment (such as a truck or airplane), no additional weight

should be added (no instrument controller(s) should be added).

Use proper hardware. Do not interchange hardware. Use only speciﬁed mounting

screws.

Use care when installing and removing product from rack. Avoid pinching

ﬁngers and hands when installing and removing. Do not force the product when

installing. Gently pull the product out when removing.

Use only with speciﬁed products. Do not use rackmount on products for which

it was not intended. Refer to individual product manuals for details or contact

Tektronix Customer Service when in doubt.

Contacting Tektronix Tektronix, Inc.

14150 SW Karl Braun Drive

P.O. Box 500

Beaverton, OR 97077

USA

For product information, sales, service, and technical support:

In North America, call 1-800-833-9200.

Worldwide, visit www.tek.com to ﬁnd contacts in your area.

www.tek.com

*P075109400*

075-1094-00

Kit description

The rackmount kit is a collection of parts that, once installed, holds one or two

RSA306 or RSA306B Real-Time Spectrum Analyzers, for mounting into a

standard 19-inch equipment rack. You will need a Phillips #2 screwdriver and a

3/8 inch nut driver (wrench or socket) to complete the installation.

2 RSA306B Rackmount Kit Installation

Kit description

Kit parts list

The following table lists the parts contained in this kit. Use the associated ﬁgure

to identify the parts and to assemble the kit. (See Figure 1.)

Table 1: RSA306BRACK rackmount kit parts list

Item

no. Name and description Qty.

1BRACKET, FRONT 1

2BRACKET, CLOSURE, FRONT 1

3BRACKET, MAIN 1

4BRACKET, STATIONARY RACK, REAR 2

5BRACKET, CLOSURE, FRONT MIDDLE 2

6 Bag containing screws and nuts 1

Figure 1: Rackmount kit assembly

RSA306B Rackmount Kit Installation 3

Kit description

Installation

The rack frame comes completely assembled with the face plate and closure plate

in place. Use the following procedure and refer to the illustration to assemble the

rackmount hardware and install the instrument into the rack. (See Figure 1.)

1. Remove the front bracket (item 1) and front closure bracket (item 2) by

unscrewing the four thumb screws.

2. Attach the RSA306B preassembled main bracket (item 3) into your rack

chassis using four 10-32 screws.

4 RSA306B Rackmount Kit Installation

Kit description

3. Attach the stationary brackets (item 4) to the rear rack using two 10-32

screws, one on each side.

4. Connect the stationary brackets (item 4) to the RSA306B main bracket (item

3) using four 10-32 screws and nuts, two sets per bracket.

5. Insert the RSA306 or RSA306B instrument(s) into the rackmount.

RSA306B Rackmount Kit Installation 5

Kit description

6. Reinstall the front bracket (item 1) and front closure bracket (item 2).

a. If installing one instrument: Reinstall the front bracket (item 1) by starting

the threads of the two thumb screws on either side of the instrument.

Reinstall the front closure bracket (item 2) by slipping it behind the front

bracket (item 1) and starting the threads of the thumb screws that go

through the holes provided in the closure bracket (item 2). Tighten all

four thumb screws.

b. If installing two instruments: Reinstall the front bracket (item 1) by

starting the threads of all four thumbscrews,andthentighteningall

four thumb screws.

7. You can now run cables through the center pass-through opening. If you are

not running cables through the pass-through opening, install the front middle

closure bracket (item 5) using two 10-32 nuts.

6 RSA306B Rackmount Kit Installation

Autres manuels pour RSA306

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Tektronix Instrument de mesure

Tektronix

Tektronix RSA5BUP Manuel utilisateur

Tektronix

Tektronix DSA8300 Manuel utilisateur

Tektronix

Tektronix RSA3303A Manuel utilisateur

Tektronix

Tektronix P6207 Manuel utilisateur

Tektronix

Tektronix CSA7404B Manuel utilisateur

Tektronix

Tektronix P6106A Manuel utilisateur

Tektronix

Tektronix NetTek Y400 Instructions d'installation et d'entretien

Tektronix

Tektronix TLA7000 Series Manuel utilisateur

Tektronix

Tektronix P5210 Manuel utilisateur

Tektronix

Tektronix Keithley 1756 Manuel utilisateur

Tektronix

Tektronix KEITHLEY 2450-EC Manuel utilisateur

Tektronix

Tektronix 7L5 Manuel utilisateur

Tektronix

Tektronix P3410 Manuel utilisateur

Tektronix

Tektronix WVR720UP Manuel utilisateur

Tektronix

Tektronix PA3000 Manuel d'installation et d'exploitation

Tektronix

Tektronix A622 Manuel utilisateur

Tektronix

Tektronix FCA3100 Series Guide de l'administrateur

Tektronix

Tektronix DSA8200 Series Manuel utilisateur

Tektronix

Tektronix THM550 Manuel utilisateur

Tektronix

Tektronix Keithley 4200A-SCS Manuel utilisateur

Tektronix

Tektronix PQA600A Manuel d'utilisation et d'entretien

Tektronix

Tektronix 1502C Manuel utilisateur

Tektronix

Tektronix TLA7000 Series Manuel utilisateur

Tektronix

Tektronix WVR5200 Series Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur