TECshow NEBULA TRI Manuel utilisateur

P. 1

| Nebula Tri

RGB LED WASH LIGHT

80 x 3-in-1 3W LEDs

USER MANUAL / MANUAL DE USUARIO

PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE USE

POR FAVOR LEA LAS INSTRUCCIÓNES ANTES DE USAR

P. 2

Nebula Tri |

1. OVERVIEW

English version

NEBULA TRI

RGB LED WASH LIGHT - 80 x 3-in-1 3W LEDs

NEBULA TRI is an indoor LED par powered by 18

x 3-in-1 RGB 1W LEDs. The xtures comes in a light-

weight and compact design and its ideal for floor

applications, thanks to its double bracket. Provid-

ed with a 25º beam angle and 0-100% electronic

dimming, Nebula Tri is an excellent tool for creating

stunning ambiances and gives you great exibility

with its 3 operational modes (Master/Slave, Sound

Active, DMX).

Source & Optics

• Light Source: 18 x 3-in-1 RGB 1W LEDs

• LEDs life: 50,000 hours

• Beam angle: 25º

Photometric data

• Luminous Flux: 950 lux @ 3m (10 .)

Eects & Functions

• Dimmer: Full range 0-100% general & for all four

colors

• Strobe eect

• Built-in programs

Control

• DMX channels: 3/7

• Operational modes: DMX, Master/Slave &

Sound-active

Physical

• LED display

• DMX connectors: 2 XLR connectors (XLR-3 In

and Out)

• Power supply connectors (In/Out)

• Dimensions: 240x80x235 mm. / 9.4x3.1x9.2 in.

• Weight: 1 Kg. / 2.2 Lbs.

P. 3

| Nebula Tri

English version

Compare LED Par light with traditional par light , Led par

light have more rich color effects, color mixing effect rich,

color mixing effect of trichromatic LED of up to 16700000,

the classification of LED par light: use is divided, One,It

is a commercial lighting, also called the spotlight, main-

ly plays the role of illumination, high power LED Bulb,LED

bulb usually use a single color, small size, are often used

in shopping malls, hotels, guesthouses, square fountain

etc.. Two,Stage lighting, mainly to lighting, color change,

making the stage atmosphere, the size of the power LED

has, LED Bulb color has red, green, blue, white. Oen used

for stage performances, wedding etiquette, exhibition and

conference time.

P. 4

Nebula Tri |

2. SAFETY INTRODUCTIONS

English version

• Please keep this User Guide for future consulta-

tion. If you sell the unit to another user, be sure

that they also receive this instruction booklet.

• All xtures are intact from the manufacturer,

please operate follow up the user manual, arti-

cial fault are not under guarantee repair.

• Unpack and check carefully that there is no

transportation damage before using the unit.

• The unit is for indoor use only. Use only in a dry

location.

• Do install and operate by operator.

• Use safety chain when xes the unit. Don’t han-

dle the unit by taking its head only, but always

by taking its base.

• The unit must be installed in a location with ad-

equate ventilation, at least 50cm from adjacent

surfaces.

• Be sure that no ventilation slots are blocked,

otherwise the unit will be overheated.

• Before operating, ensure that the voltage and

frequency of power supply match the power

requirements of the unit.

• It’s important to ground the yellow/green con-

ductor to earth in order to avoid electric shock.

• Maximum ambient temperature TA : 40°. Don’t

operate it where the temperature is higher than

this.

• Don’t connect the device to any dimmer pack.

• First run, there will be smoke or smells, and all

disappearing a few minutes later.

• Make sure there are no ammable materials

close to the unit while operating, as it is re

hazard.

• Look over power wires carefully, replace im-

mediately if there is any damage.

• Never run on for a long time lest shortening

lifespan. Avoid any inammable liquids, water

or metal objects entering the unit.

• Once it happen, cut o the mains power imme-

diately.

• Do not operate in dirty and dusty environ-

ment, also cleaning xtures regularly.

• Do not allow children to operate the xture.

• Do not touch any wire during operation as

there might be a hazard of electric shock.

• Avoid power wires together around other

cables.

• Disconnect mains power before fuse/lamp

replacement or servicing.

• Replace fuse only with the same type.

• In the event of serious operating problem,

stop using the unit immediately.

• Never turn on and o the unit time aer time.

• The housing, the lenses, or the ultraviolet lter

must be replaced if they are visibly damaged.

• Do not open the unit as there are no user ser-

viceable parts inside.

• Never try to repair the unit by yourself. Re-

pairs carried out by unskilled people can lead

to damage or malfunction. Please contact

the nearest authorized technical assistance

center.

• Disconnect the mains power if the xture is

not used for a long time.

• Do use original packing materials once trans-

Please read the instructions carefully which includes important

information about the installation, operation and maintenance.

WARNING!

P. 5

| Nebula Tri

English version

The unit should be mounted via its screw holes on

the bracket. Always ensure that the unit is rmly

xed to avoid vibration and slipping while operat-

ing. Always ensure that the structure to which you

are attaching the unit is secure and is able to sup-

port a weight of 10 times of the unit’s weight. Also

always use a safety cable that can hold 12 times of

the weight of the unit when installing the xture.

The equipment must be xed by professionals. And

it must be xed at a place where is out of the touch

of people and has no one pass by or under it.

How to Set the Fixture

1.The indicating light

2.Function display: display menu and the selected

function

3.Menu button

4.Microphone

5.DMX signal output

6.Power supply socket

7.DMX signal input

port it again.

• Do not look directly at the LED light beam while

the xture is on.

For power supply, do not connect in series

much more than 7 units, use another mains

supply for next 7 units.

3. INSTALLATION

P. 6

Nebula Tri |

English version

4. MENU

P. 7

| Nebula Tri

English version

• DMX Mode

Select the Addr menu, press the ENTER key to con-

rm. Then use the initial address code DOWN/UP

button to set this light (A001 ~ A512). Once you have

set your initial address code, press ENTER to dene

and save. Not to make any changes, wait a minute

to automatically exit the menu and save. The main

menu, please press the MENU button.

• Channel selection model

Select the Chnd menu, press the ENTER key to

determine. To use the DOWN/UP button to chan-

nel mode: 3Ch (3 Channel).7Ch (7 Channels) mode.

Select the desired channel mode, press ENTER to

determine and save. Not to make any changes, wait

a minute to automatically exit the menu and save.

The main menu, please press the MENU button.

• Master/Slave mode

Select the SLnd menu, press the ENTER key to con-

rm. To use the DOWN/UP key set of Master-Slave

mode need: NAST (master.SL 1 (Slave 1). SL 2( Slave

2). SL 3( Slave 3). SL 4 (Slave 4). Select the desired

mode, press ENTER to determine and save. Not to

make any changes, wait a minute to automatically

exit the menu and save. The main menu, please

press the MENU button

• Performance mode

Select the Shnd menu,press the ENTER key to

determine.To use DOWN/UP button to performace

mode: FADE (Gradient), SOUN (Sound), Auto (Au-

tomatic), COLOR (Color) mode, Select the desired

mode, press ENTER to determine and save. Not to

make any changes, wait a minute to automatically

exit the menu and save. The main menu, please

press the MENU Button FADE (Gradient) SP 1-SP 8

8 fades speed selection.Uuse DOWN/UP button to

select the gradient speed required.according to EN-

TER, determine and save. Not to make any changes,

wait a minute and automatically exit the MENU and

save. The main menu.plase press the MENU button

Color (Color) CO 1-CO 16 16 program mode, And

also press Stro (Strobe) have 0-255 to adjust the

speed, use the DOWN/UP button to select the

desired mode. Press ENTER to determine and ave.

NOT to make any changes,wait a minute to auto-

matically exit the menu and save.

• Backlight mode

Select the LED menu, press the ENTER key to

determine. Then use the DOWN/UP button to set

the backlight mode: ON (Open). OFF (Close). Select

the desired mode, press ENTER to determine and

save. Not to make any changes, wait a minute to

automatically exit the menu and save. The main

menu, please press the MENU button.

• White Balance

Select the BALA menu, Press the ENTER key to

determine. To use the DOWN/UP to display mode:

Red (Red), Gree (Green,Blue(BLue), select the

desired mode, Press ENTER to determine and

save. Not to make any changes, Wait a moment to

automatically exit the menu and save. The main

menu, Please press the MENU button Red (Red)

with 125-255 using the DOWN/UP button to bright-

ness. Press ENTER to dene and save. Not to make

any changes, wait a minute to automatically exit

the menu and save. The main menu, Please press

the MENU button Gree (Green) with 125-255 using

the DOWN/UP button to brightness. Press ENTER

to dene and save. Not to make any changes, wait

a minute to automatically exit the menu and save.

• Show positive and negative direction

Select the dISP menu, press the ENTER key to

determine. To use the DOWN/UP button to dis-

play mode: dISP (positive). DSIP (reverse). Select

the desired mode, press ENTER to determine and

save. Not to make any changes, wait a minute to

automatically exit the menu and save. The main

menu, please press the MENU button.

P. 8

Nebula Tri |

5. DMX 512 CONNECTIONS

English version

The DMX 512 is widely used in intelligent lighting control, with a maximum of 512 channels.

Termination reduces signal errors and avoids signal transmission problems and interference. lt is always

advisable to connect a DMX terminal. (Resistance 120 ohm 1/4W) between pin 2 (DMX-) and pin 3 (DMX+) of the

last xture.

• Auto-test

Select the Test menu, press the ENTER key to deter-

mine. The machine will start automatically detect

color. Not to make any changes, wait a minute to

automatically exit the menu and save. The main

menu, please press the MENU button.

• Fhrs

Select the Fhrs menu, press the ENTER key to de-

termine. You can see the use of machine time / h.

Not to make any changes, wait a minute to auto-

matically exit the menu and save. The main menu,

please press the MENU button.

• Temperature

Select the Tenp menu, press the ENTER key to de-

termine. You can see the machine light board tem-

perature / degree. Not to make any changes, wait

a minute to automatically exit the menu and save.

The main menu, please press the MENU button.

COMMON

DMX +

DMX -

DMX OUTPUT

DMX INPUT

P. 9

| Nebula Tri

7. 7 CH CHANNEL MODE

6. 3 CH CHANNEL MODE

English version

P. 1 0

Nebula Tri |

English version

8. FIXTURE CLEANING

The cleaning of internal must be carried out periodically to optimize light output. Cleaning frequency depends

on the environment in which the xture operates: damp, smoky or particularly dirty surrounding can cause

greater accumulation of dirt on the xture’s optics.

• Clean with so cloth using normal glass cleaning uid.

• Always dry the parts carefully.

• Clean the external optics at least every 20 days.

• Clean the internal optics at least every 30/60 days.

Table des matières

Langues :

Autres manuels TECshow Matériel de DJ

TECshow

TECshow MadBox 3-in-1 Manuel utilisateur

TECshow

TECshow QUADBAR 12 PIX Manuel utilisateur

TECshow

TECshow NEBULA PAR 162 Manuel utilisateur

TECshow

TECshow RAZOR 7 QUAD Manuel utilisateur

TECshow

TECshow octobeam Manuel utilisateur

TECshow

TECshow GOBO DERBY UV Manuel utilisateur

TECshow

TECshow clovertec Manuel utilisateur

TECshow

TECshow cityTEC Manuel utilisateur

TECshow

TECshow ALFIE SPOT 2 Manuel utilisateur

TECshow

TECshow ION 1915Z Manuel utilisateur

TECshow

TECshow UV BAR Manuel utilisateur

TECshow

TECshow SATURN Manuel utilisateur

TECshow

TECshow FLATSIX Manuel utilisateur

TECshow

TECshow THUNDERSTORM Manuel utilisateur

TECshow

TECshow TWISTER 360 Manuel utilisateur

TECshow

TECshow Quatrobeam Move Manuel utilisateur

TECshow

TECshow kraftTEC Manuel utilisateur

TECshow

TECshow BLAST 5R Manuel utilisateur

TECshow

TECshow MasterPAR Manuel utilisateur

TECshow

TECshow MASTERPAR 25 Manuel utilisateur

TECshow

TECshow FRESNELED 3100 MKII Manuel utilisateur

TECshow

TECshow NAVIGATOR NODE POE Manuel utilisateur

TECshow

TECshow chromatec Manuel utilisateur

TECshow

TECshow MadBox 3-in-1 Manuel utilisateur

Manuels Matériel de DJ populaires d'autres marques

ALPHA LITE

ALPHA LITE ALPHA 1500 Manuel du propriétaire

Chauvet

Chauvet OVATION E-930VW Manuel utilisateur

Zumtobel

Zumtobel APHRODITE Home Manuel utilisateur

Snow Masters

Snow Masters Zig Oscillator Manuel utilisateur

EuroLite

EuroLite 50530554 Manuel utilisateur

Beamz

Beamz BUV243 Manuel utilisateur

thomann

thomann Stairville DJ Lase 40-G MK-III Manuel utilisateur

Eagletone

Eagletone 6 Eyes Flower Manuel utilisateur

EuroLite

EuroLite FLD-1508 Manuel utilisateur

Technical Pro

Technical Pro LG8xSEA Manuel utilisateur

JB Systems

JB Systems Lounge Laser DMX Manuel utilisateur

Lightmaxx

Lightmaxx Vega Halo 90 Manuel utilisateur

Elation

Elation FUZE WASH Z350 Manuel utilisateur

Maverick

Maverick MK3 WASH Manuel utilisateur

Infinity

Infinity TF-260C7 Fresnel Manuel utilisateur

Chauvet

Chauvet EVE E-50Z Manuel utilisateur

Eliminator Lighting

Eliminator Lighting E 138 Manuel utilisateur

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Manuel utilisateur