Using your blender
Before the first use, clean the blender according to the section of
“quick cleaning”. The time running unit without load can’t exceed 15s.
Important: Blades are very sharp, handle with care. Ensure that the hand-
held blender is unplugged from the power outlet before assembling or
removing attachments.
Instruction for blender
1.Max operation duration per time should less than 1 minute, and 3 minute
rest time must be maintained at two consecutive cycles.
2.Toassemble the detachable shaft with the motor unit, turn the
shaft anti-clockwise direction until tightened. To disassemble, just
turn in the adverse direction.
3.Simply plug the hand-held blender to poweroutlet.
4.Lower the hand-held blender into food. Then press and hold the lowspeed
button or high speed button to start operating.
5.Tostop the hand-held blender by releasing the low speed button or
high speed button.
6.When blending carrot, cut small piece, and place it into small chopper bowl,
then add water, the max quantify of carrot can't exceed 200g，water，300g, in
every blending.
CLEANING AND MAINTENANCE
1. Unplug the appliance and remove the detachable stem.
Note: Do not immerse the detachable stem of the blender in water because
overtime the lubrication on the bearings may wash away.
2. Wash the detachable stem under running water, without the use of
abrasive cleaner or detergents. After finishing cleaning the detachable stem,
place it upright so that any water which may have got in, can drain out. The
stem is dishwasher safe component.
3. Wash the cup, bowl, beater and blade in warm soapy water. The bowl and
the beater are not recommended to place in dishwasher as the plastic
component deteriorates through prolonged use of dishwashercleaning.
4. Wipe the motor unit with a damp cloth. Never immerse it in water for
cleaning as a electric shock may occur.
5. Dry thoroughly.
