Technoline WT 197 Manuel utilisateur

P. 1

WT 197 INSTRUCTION MANUAL

RADIO CONTROLLED ALARM CLOCK WITH TEMPERATURE AND

CALENDAR

P. 2

INSTALLATION

For best reception of radio controlled signal, keep your clock close to a window and away from metal

surfaces, electrical appliances and magnetic fields.

BATTERY INSTALLATION

1. Slide open the battery cover at the bottom of your unit.

2. Insert 3 x AAA batteries into the battery compartment by observing the correct + / - polarity

signs inside the battery compartment.

3. Replace the battery cover. Your clock is ready to work you.

ENVIRONMENTAL RECEPTION EFFECTS

Your radio controlled clock obtains the accurate time with wireless technology. Same as

All wireless devices, the receiving ability maybe affected by, but not limited to, the following

circumstances:

Long transmitting distance

Nearby mountains and valleys

Among tall buildings

Near railway, high voltage cable etc.

Near freeway, airport, etc

Near construction site

Inside concrete buildings

Near electrical appliances

Near computers and TV’s

Inside moving vehicles

Near metallic structures

Place your clock at a location with optimal signal, i.e. close to a window and way from metal surfaces

or electrical appliances.

DCF SINGAL RECEPTION AND SIGNAL INDICATOR

After your clock is powered up, it starts to receive DCF signal. The icon flashes.

Weak or no DCF signal (only icon flashing)

Receiving strong DCF signal ( icon flashing)

Successful Reception ( icon becomes static)

Failed Reception ( icon disappear)

Automatic reception and Manual Reception

Your clock starts automatic reception everyday at 1:00, 2:00, 3:00. If it fails to receive the DCF time

signal at 3:00, it will start reception at 4:00. If it fails again it will start reception at 5:00. If it fails again

it will start automatic reception at 1:00 again in the next day.

Manual reception: simply press WAVE button once to start manual reception. Press and hold WAVE

for 2 seconds to stop manual reception.

Remark: when your clock is receiving radio controlled time signal, all buttons except the snooze / light

button do not function.

P. 3

TO SET CALENDAR, 12/24 TIME AND TIME

1. Press and hold SET for 2 seconds, time digits change to “24 Hr” and flash, press +/- to select “12

Hr” time format or “24 Hr” time format. When 12HR is selected, AM or PM will be displayed.

2. Then press SET once again, time digits change to “00”and flash. Press +/- button to select time

zone: “00” = GMT +1 hour (e.g. Germany)

“01” = GMT +2 hours (e.g. Finland)

“-01” = GMT 00 hour (e.g. U.K.)

3. Then press SET once again, hour digits flash. Press +/- button to set hour.

4. Then press SET once again, minute digits flash. Press +/- button to set minute.

5. Then press SET once again, time digits change to year “2009”and flash. Press+/- to set the year.

6. Then press SET once again, month digits flash. Press +/- button to set month.

7. Then press SET once again, date digits flash. Press +/- button to set date.

8. Then press SET once again, day of week digits flash. Press +/- button to select the language of

day of week.

EN = English

GE = German

FR = French

IT = Italian

DU = Dutch

SP = Spanish

DA = Danish

9. Press SET to return to normal mode, or it will return to normal mode in around 30 seconds if no

press of any other buttons.

TO SET ALARM TIME

Press and hold ALM SET / ON-OFF once, time digits change to alarm time digits “0:00 AL” and hour

digits flash. Then press +/- to set your desired hours of alarm time.

Press ALM SET / ON-OFF once, alarm minute digits flash. Press +/- to set your desired minutes of

alarm time.

Press ALM SET / ON-OFF once to return to normal mode, or it will return to normal mode in around

30 seconds if no further press of any other buttons.

TO TURN ON OR OFF YOUR ALARM

Press ALM SET / On-Off once to turn on or off the daily alarm. When the alarm function is turned on,

the icon appears between the hour and minute digits.

TO USE SNOOZE ALARM

When time reaches your set alarm time, your clock will give beep sound to wake you up. The icon

will flash.

1) Press SNOOZE on the top once to stop the alarm temporarily, the “ ” and “Zz” icon keep

flashing. The alarm will beep again in 5 minutes.

P. 4

2) To stop the alarm, press ALM SET / ON-OFF once, the alarm beep will stop and the icon

become static, alarm will beep again same time next day.

Alarm Duration: 2 minutes

TO DISPLAY TEMPERATURE IN DEGREE °C OR °F

Simply press –(°C/°F) to display temperature in degree °C or degree °F.

TROUBLE SHOOTING

In case your clock shows irrelevant information or digits, it maybe affected by electrostatic discharge

or interferences from other devices. Press the RESET button on the top of your clock. Your clock will

be reset to default setting of time and calendar and it will start to receive radio controlled time signal

again.

CARE OF YOUR RADIO CONTROLLED CLOCK

1. Do not expose the unit to extreme temperature, water or direct sunlight

2. Avoid contact with any corrosive materials

3. Do not subject the unit to excessive force, dust or humidity

4. Do not open the inner back case or tamper with any components of this unit

SPECIFICATIONS

Indoor Temperature Range -10°C to +50°C (+14.2°F to +122°F)

Temperature Resolution 0.1°C

Alarm Duration 2 minutes

Snooze Duration 5 minutes

VERSION 1.0

2010.01.11

P. 5

Words in the figure:

ENGLISH

OTHER LANGUAGE

Figure 1:

FRONT VIEW

ALARM ON

TIME

DCF SIGNAL INDICATOR

TEMPERATURE

DAY OF WEEK

MONTH / DATE

SNOOZE ICON

BACK VIEW

SET

ALARM SET / ALARM ON-OFF

–(°C/°F)

SNOOZE / LIGHT

WAVE

BOTTOM VIEW

INSERT 3 X AAA BATTERIES INTO

THE BATTERY COMPARTMENT

BATTERY DOOR

Autres manuels pour WT 197

Table des matières

Autres manuels Technoline Réveil

Technoline

Technoline DreamMate Manuel utilisateur

Technoline

Technoline WT 755 Manuel utilisateur

Technoline

Technoline WT260 Manuel utilisateur

Technoline

Technoline WT 758 Manuel utilisateur

Technoline

Technoline WT 745 Manuel utilisateur

Technoline

Technoline WT475 Manuel utilisateur

Technoline

Technoline WQ 100 Manuel utilisateur

Technoline

Technoline WT 330 Manuel utilisateur

Technoline

Technoline WQ 296 Manuel utilisateur

Technoline

Technoline WT293 Manuel utilisateur

Technoline

Technoline WT265 Manuel utilisateur

Technoline

Technoline WT 538 Manuel utilisateur

Technoline

Technoline WT 498S Manuel utilisateur

Technoline

Technoline WQ170 Manuel utilisateur

Technoline

Technoline WT475 Manuel utilisateur

Technoline

Technoline WT-465 Manuel utilisateur

Technoline

Technoline WS6815 Manuel utilisateur

Technoline

Technoline DreamMatePro Manuel utilisateur

Technoline

Technoline WT 498 Manuel utilisateur

Technoline

Technoline WT 495 Manuel utilisateur

Technoline

Technoline WT 519 Manuel utilisateur

Technoline

Technoline WT 767 Manuel utilisateur

Technoline

Technoline WT 235 Manuel utilisateur

Technoline

Technoline WT 770 Manuel utilisateur

Manuels Réveil populaires d'autres marques

Steren

Steren CLK-210 Manuel utilisateur

COP-USA

COP-USA ALCDVR32-SL Manuel utilisateur

Philips

Philips HF3505/70 Manuel technique

Casio

Casio PQ-70 Manuel utilisateur

iHome

iHome IA63 Manuel utilisateur

Coopers

Coopers 9765 Manuel utilisateur

ANJANK

ANJANK AC-190 Mode d’emploi

TFA

TFA 98.1075 Manuel utilisateur

Sharper Image

Sharper Image 204050 Manuel utilisateur

Lumie

Lumie Zest Manuel utilisateur

Dexford

Dexford RCT200 Manuel utilisateur

Philips

Philips AJL303/37B Manuel utilisateur

RST

RST Q754 Manuel utilisateur

iHome

iHome iKT50 Manuel utilisateur

Sony

Sony dash HID-B7 Manuel utilisateur

SVINZ

SVINZ SCC009 Manuel utilisateur

Clas Ohlson

Clas Ohlson 918863 Manuel utilisateur

IKEA

IKEA FNURRA Manuel utilisateur