TECHNOJET FZE TJ560C Manuel utilisateur
TJ560C
Continuous Ink Jet
Printing System
TECHNOJET FZE
TJ560C
Continuous Ink Jet
Printing System
User Guide
Revised 07/08/2019
PN# 20190006 Rev – Ver1.0
Contents
Introduction ..............................................................................................................................5
Printing System Specifications ..........................................................................................6
Components..............................................................................................................................7
Top View.............................................................................................................................7
Front View..........................................................................................................................8
Side View............................................................................................................................8
Printhead View .................................................................................................................8
Equipment Setup.....................................................................................................................9
Printing System Component.........................................................................................9
Installation and Setup Instructions .........................................................................10
Operation.................................................................................................................................13
Status Indicator..............................................................................................................13
Menu Page........................................................................................................................14
Main Menu.................................................................................................................14
Message Editing......................................................................................................14
Printing Setting........................................................................................................22
System Setting ........................................................................................................30
Ink System ................................................................................................................36
Maintenance.............................................................................................................37
Device Debug ...........................................................................................................39
Warning log...............................................................................................................42
File Management.....................................................................................................43
Maintenance...........................................................................................................................44
Daily Maintenance.........................................................................................................44
Turn Off Daily ...........................................................................................................44
Cleaning Printhead.................................................................................................44
Checking the level of Ink tank and Solvent tank .........................................45
Ink Stream Position Adjustment...............................................................................45
Ink Drop Break-off Adjustment..................................................................................46
Shut Down Less Than One Month.............................................................................46
Shut Down Over One Month........................................................................................47
Filters.................................................................................................................................47
Filters Changing Cycle..........................................................................................47
Changing Filters......................................................................................................48
Cleaning or Changing Fan Filters..............................................................................50
Warnings ..................................................................................................................................50
“Gutter warning” ............................................................................................................50
“Ambient temp. low warning”....................................................................................50
“Ink mixer tank overflow” warning ..........................................................................50
“Printhead cover is open” warning...........................................................................51
“Ambient temp. high warning”. ..................................................................................51
“Electrical temperature too high” warning............................................................51
“Viscometer fault” warning. .......................................................................................51
“Ink bottle chip fault” warning . .................................................................................52
“Solvent bottle chip fault” warning. .........................................................................53
“Filter assembly fault” warning. ................................................................................53
“Ink shortage” warning.................................................................................................53
“Solvent shortage” warning. .......................................................................................54
“Ink pressure too high” warning . ..............................................................................54
“Ink pump rotate speed is too high” warning.......................................................54
“Ink mixer tank level low” warning. .........................................................................54
Troubleshooting......................................................................................................................55
Appendix: Installation and Warranty Form. ..................................................................56
Introduction
Thank you for purchasing the TJ560C Continuous Ink Jet Printing System.
This printer will provide you with quality coding on a variety of substrates: porous, non-porous,
smooth, textured, curved, concave and more. Printing up to 5 lines (5x5 dot matrix) of text,
TJ560C printer offers a reliable, yet cost effective solution for virtually any small character primary
packaging application.
Please take time to read this manual very carefully. It will answer any questions you may have
regarding installation, startup and programming. By taking time now, you will eliminate frustration
during the early stages of operating the printer and prevent any unnecessary damage to the
system. We want your startup to be a pleasant experience. If you have any questions, please
don’t hesitate to contact our technical support department.
Also, please take time to complete the “Installation and Warranty Form” and return it to us. This
will ensure you of a complete warranty period on your printing system.
Printing System Specifications
Nozzle size 60µm (standard)
Dot matrix 5x5,7x5,9x7,12x12,16x16,24x24 and 32x32
Printing height 1.8mm~15mm
Printing speed 285m/min. (5x5 single line)
Throw distance Up to 30mm
Display 10.1＂1280x800,TFT color touch screen
Product sensor Photocell sensor (NPN type)
Controller dimensions 370mm x 307mm x 490mm
Controller weight 20Kg
Printhead dimensions 44mm x 41mmx232mm
Umbilical tube length 3M (standard)
Operating environment Ambient Temperature：5°C~45°C
Ambient Humidity：30-95%RH (non-condensing)
Electrical 220VAC±10%, 50/60Hz. (Properly wired and grounded)
Current: 3A
(Note: Should select the correct power supply according
to the voltage rating marked on the printer nameplate.)
Message capability Up to 4 lines (7x5 dot matrix);
Up to 5 lines (5x5 dot matrix);
Message length Up to 40 blocks, 640 columns in each block.
Message & Logo storage 8G card (standard)
Date format YY/MM/DD, MM/DD/YY and DD/MM/YY.
Message editing Counter, 24-hour clock, shift code, date, Julian date,
1-digit weekday, expiry date, logo, barcode, random code
Components
Printing system consists of Controller, Printhead and Umbilical tube which is flexible and strong
enough to protect the ink tubes and wires inside it.
Top View
1 Power supply indicator
2 Jetting on indicator
3Ready indicator
4 Printing indicator
5 Warning indicator
6 Power switch
7 Touch screen
Unscrew two fixing screws M4x16, and open top cover, then could find Integrated main board and
Core board.
1 Core board
2 Integrated main board
3 Fan
4 External device interface PCB
5 Switch power 24V
6 HV power supply
7 Charge board
Warning
Please do not touch integrated main board and core board directly, electrostatic would damage
electronic components.Antistatic wrist strap is strongly recommended.
Front View
Rotate door lock counterclockwise to open the front door, then could find Ink tank, Solvent tank
and Ink Mixer Tank.
1 Ink mixer tank
2 Ink tank
3 Solvent tank
Side View
From side could find following connectors interface: Encoder interface, photocell interface, Serial
interface, Printing output interface, Network interface, USB interface.
1 Encoder interface
2 Photocell interface
3 Serial & Alarm interface
4I/O interface
5 Network interface
6 USB interface
7 Power socket
Note
Photocell sensor is standard, could find in package.
Encoder is optional.
Printhead View
Open printhead cover, could find gunbody, charge electrode, detector, negative plate, HV
deflection plate, gutter.
1 Gun body
2 Charge electrode
3 Detector
4 Negative plate
5 HV deflection plate
6 Gutter
Note
Could find HV switch sensor on the interior surface of printhead cover.
If “Printhead Warning” function enabled, HV will be shut off as soon as open printhead cover.
Equipment Setup
Printing System Component
YourTJ560C printing system has been pre-assembled and tested for your convenience. Before
installing the TJ560Cprinting system, verify that you received all of the following items. If any
items are missing or damaged, contact Hi-Pack International Sales Department.
TJ560C printing system controller with umbilical cord
All parts for printhead stand
Photocell product sensor
Power cord
Installation tools
User guide for TJ560C printing system
Installation and Setup Instructions
Remove the carton cover from the top, then find all parts for the printhead stand, and take them
out. Also check the tools as following figure shows:
Open end wrench, 12mm and 14mm
Stylus pen
Phillips head screw driver
Magnifier
Bulb pump
Small solvent bottle with spout (Cleaning bottle)
Allen Wrench
Caution --Equipment Damage! Only Hi-Pack trained personnel may carry out installation
and maintenance work. Any such work undertaken by unauthorised personnel may damage
the printer and will invalidate the warranty.
Set up the printhead stand for fixing the printhead according to the following figure shows:
Table des matières
