Technaxx TX-145 Manuel utilisateur
1
Technaxx®* User Manual
WiFi IP Outdoor Camera TX-145 &
Additional camera for TX-128 Set
Introduction
The manufacturer Technaxx Deutschland GmbH & Co.KG hereby declares
that this device, to which this user manual belongs, complies with the essential
requirements of the standards referred to the Directive RED 2014/53/EU. The
Declaration of Conformity you find here: www.technaxx.de/ (in bar at the
bottom “Konformitätserklärung”). Before using the device the first time, read
the user manual carefully.
Service phone No. for technical support: 01805 012643 (14 cent/minute from
German fixed-line and 42 cent/minute from mobile networks).
Free Email: support@technaxx.de
The support hotline is available Mon-Fri from 9 am to 1 pm & 2 pm to 5 pm
If you drill a hole in the wall, please make sure that power cables, electrical
cords and/or pipelines are not damaged. When using the supplied mounting
material, we do not take the liability for a professional installation. You are
entirely responsible to ensure that the mounting material is suitable for the
particular masonry, and that the installation is done properly. When working at
higher altitudes, there is danger of falling! Therefore, use suitable safeguards.
Keep this user manual for future reference or product sharing carefully. Do the
same with the original accessories for this product. In case of warranty, please
contact the dealer or the store where you bought this product.
Warranty 2 years
Enjoy your product * Share your experience and opinion on one of the
well-known internet portals.
Hints for Environment Protection: Packages materials are
raw materials and can be recycled. Do not disposal old devices
or batteries into the domestic waste. Cleaning: Protect the
device from contamination and pollution (use a clean drapery).
Avoid using rough, coarse-grained materials or
solvents/aggressive cleaner. Wipe the cleaned device
accurately. Distributor: Technaxx Deutschland GmbH &
Co.KG, Kruppstr. 105, 60388 Frankfurt a.M., Germany
2
Contents
Introduction.................................................................................................... 1
1. Features .................................................................................................... 3
2. Product overview....................................................................................... 3
3. Quick operation guide................................................................................ 5
3.1 For STANDALONE USE................................................................... 5
3.2 Use as ADDITIONAL CAMERA for TX-128 Set................................ 6
4. How to start (Login/Registration)................................................................ 7
4.1 Local mode & Users mode................................................................ 7
4.2 Registration ...................................................................................... 7
4.3 Forget Password............................................................................... 8
5. How to add a device .................................................................................. 9
5.1 Add Device....................................................................................... 9
5.2 Add device when already connected to network............................. 12
5.3 Adding device from the same network............................................ 13
5.4 IP/DDNS adding ............................................................................. 14
6. How to navigate through the App............................................................. 16
6.1 My device ....................................................................................... 16
6.1.1 Live view.................................................................................. 16
6.1.2 Playback.................................................................................. 21
6.2 My center (personal area)............................................................... 22
7. How to use PC Software Windows (& MAC)............................................ 24
7.1 Installation ...................................................................................... 24
7.2 Login and add device...................................................................... 25
7.3 Open live view ................................................................................ 27
7.4 Playback recordings ....................................................................... 27
8. FAQs....................................................................................................... 28
9. Technical Specifications .......................................................................... 29
3
1. Features
⚫Use as additional camera for TX-128 or stand-alone camera
⚫Viewing angle 90° horizontal & 55° vertical
⚫FullHD video resolution 1920 x 1080 with max. 15fps
⚫Brilliant 1/ 2.9" CMOS colour sensor (2MP)
⚫Motion detection up to ~8m (PIR 120°)
⚫3 IR LED up to ~15m for optimal night vision
⚫Rapid installation, only via Android & iOS APP
⚫Free “Security Premium” APP for worldwide access [available on
Google Play & APP Store]
⚫Water and dust resistant IP66
⚫Alarm function (push message) on your Smartphone
⚫Built-in microphone & speaker for 2-way communication
⚫Supports MicroSD(HC/XC) cards up to 128GB
⚫H.264/H.265 video compression (for space-saving recordings of
high quality)
⚫Supports 2.4GHz wireless network (WiFi / IEEE 802.11/b/g/n) up
to 30m
2. Product overview
IR LED:
The device activates the infrared light automatically as soon as low
illumination prevails.
MicroSD card slot:
To insert the MicroSD unscrew both screws on the bottom of the camera. Be
careful the loudspeaker is connected to the cover. Open the cover carefully to
not lose the screws. Support MicroSD card for local storage (max. 128GB). To
guarantee the normal use of MicroSD card, before insert the MicroSD card,
make sure its file system is FAT32 and there is more than 256MB space
available. When you use a size 64-128GB MicroSD card. Format the MicroSD
card after inserting and configuration via the App. To work properly, the App
must show the following status under device memory: Normal.
RESET Button:
Press the reset button for 5 seconds to reset the device. You will hear a voice.
4
1
Antenna
7
PIR sensor
2
Housing metal (IP66)
8
Vandal-Proof Housing
3
IR LED’s
9
Built in Speaker
4
Lens
MicroSD(HC/XC) card slot
(under the cover)
5
Light sensor
10
Adjustable Holder / Feet
6
Microphone
11
Mounting holes
Cable connections:
DC power input (12V/1A)
Reset button (under the cover)
LAN connection
5
3. Quick operation guide
3.1 For STANDALONE USE
In this mode TX-145 camera can only be configured by
iOS or Android APP!
Start TX-145
→Connect the device with the power adapter to a socket, TX-145 starts
automatically. The prompt voice will tell you when ready to start with the
configuration via App.
→To download the App Security Premium from the Appstore or the Playstore
search for “Technaxx Security Premium” or scan the QR-code below.
[iOS 9.0 or above; Android 7.0 or above (06-2020)]
APP icon
iOS
Android
→Open the Security Premium App on your device.
→Register for user mode your data will be saved and can be restored. For
testing the App you can simply press App testing.
→After entering the App press the plus + symbol on the top right corner and
choose Add device
→Select the type of camera for TX-145 it is WiFi camera.
→For the WiFi configuration of the TX-145 follow the shown steps in the App.
Important: The indicator light to show the current status is find at the LAN
connection. Please answer the question in the app while configuration mode
with Yes when you are asked for a flashing indicator light.
→After finishing the configuration the device is connected to your WiFi router
and is ready to use.
Note: For Android phone users, in order to facilitate the configuration, App will
obtain the WIFI information surrounding. So the Smartphone will ask whether
to allow the application to obtain relevant permission. Click “Allow”.
6
3.2 Use as ADDITIONAL CAMERA for TX-128 Set
The first camera has been matched with monitor in the factory already. The
image shows up when the kit is powered on. If users need to pair the camera
again or add an additional camera, operate as below:
Step one: Power on the monitor and camera.
Step two: Reset the camera to enter the pairing mode.
Step three: Enter the Match code interface on the monitor and click on the
match code.
Tips:
1) The camera can only perform the pairing in the reset state; the camera
needs a reset to perform the pairing mode.
2) If the camera does not pair with the monitor, click “Match Code” again to
try again.
3) If you need to replace a new camera, please click "X" on the monitor to
delete the channel and then click on match code.
7
App pictures of chapter 4, 5 and 6 are based on Security Premium for iOS and
Android in version 3.3.6 and 3.3.7.
4. How to start (Login/Registration)
4.1 Local mode & Users mode
There are Local mode and User mode on the App. Users without a
registered account can click “Local” and try this App.
→Data in Local mode will be stored at local only and cannot be restored.
→User mode: Data added or grouped by user (e.g. the device), is managed
by server, which won’t be lost even to delete all data on the Smartphone. As
long as users re-install the App and log in the old account, all data will be
restored for some auxiliary functions such as device status notification and
alarm notification.
4.1 Register or Local
4.2 Enter Email
4.2 Enter verification
code and password
4.2 Registration
Users without accounts have to take several seconds to register. Click
“Register”, enter the email address, and bind the email address (system will
send an email to this email address). Login to your email account, copy the
verification code and enter a password to complete registration (follow this
step, otherwise users cannot use forget password function).
8
4.3 Forget Password
If you forget the password and needs to get it back, click „Forget password”.
Enter the Email address into the user interface and press Confirm. The system
sends a confirmation Email, which the user can check via his Email account).
9
5. How to add a device
5.1 Add Device
Login to the App if not already done and go to “My device” interface.
Note: Due to the limitation of iOS system, some functions on Android version
cannot be reached on iOS version. For WiFi configuration this camera uses
the Access Point (Hotspot) method.
iOS and Android:
1
2
3
Click “+” on top right
corner to add the
TX-145.
Choose WiFi camera
from the device groups.
The TX-145 does not
have any indicator light.
Press Yes to continue.
Make sure the camera
is in configuration
mode. Otherwise do a
reset.
10
iOS WiFi configuration:
4
5
6
Go to your WiFi settings
of your Smartphone and
open it.
Connect with the WLAN
beginning IPC…. The
WiFi password/key is
11111111 (8x1), wait
until IPC…. WiFi is
connected and go back
to Security Premium.
Choose the WiFi you
want to connect with
and enter the WiFi
password /key.
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Technaxx Caméra de sécurité
Technaxx
Technaxx TX-28 Manuel utilisateur
Technaxx
Technaxx TX-128 Manuel utilisateur
Technaxx
Technaxx TX-44+ Wild Cam Camouflage Manuel utilisateur
Technaxx
Technaxx 4461 Manuel utilisateur
Technaxx
Technaxx TX-44 Wild Cam Manuel utilisateur
Technaxx
Technaxx TX-83 Manuel utilisateur
Technaxx
Technaxx TX-65 Manuel utilisateur
Technaxx
Technaxx TX-23 Manuel utilisateur
Technaxx
Technaxx TX-108 Manuel utilisateur
Technaxx
Technaxx TX-09 Manuel utilisateur
