Techko LF293 Manuel utilisateur

HIGH SPEED PAPER FOLDER

MODELS : LF293

OPERATION

INSTRUCTIONS

Before operating this unit, please read all of

the instructions and important

warranty information.

Warning :

Moist or humid environments will affect the performance of this

unit. Paper can become difficult to fold in humid conditions or where

heavy moisture may be present. Do not use paper folding machine

under these conditions.

PAPER FOLDING CHART

REMARKS: 1) 1ST IS THE LONGER FOLDING GUIDE;

2) 2ND IS THE SHORTER FOLDING GUIDE.

TYPE OF

FOLD

PAPER SIZE

USA (8 1/2"X11")

A J H

REVERSE SECOND FOLD GUIDE

A4 (8 1/4"X11 5/8")

(8 1/2"X14")

1ST

2ND

This chart is also found on the unit.

Customer Service :

1-888-8TECHKO (1-888-883-2456)

Website: www.techkousa.com

Mfg. By

9767 Research Drive

Irvine, CA 92618-4626

MADE IN CHINA

If you have questions or need more information on any of our

products please contact customer service.

This product has a 1 year warranty from the date of purchase. To

have your warranty fulfilled, please place product in the original box or

something similar. Pack in such a way as to prevent shipping damage

to the product. Enclose a letter describing the problem. Include your

name, address (no P.O. Boxes), a phone number where you can be

reached, a copy of your sales receipt showing the date of purchase,

and a check or money order in the amount of $10.00 to cover shipping

and handling. The unit will be replaced (TECHKO discretion) and will

be returned via UPS ground. Should you require other methods of

shipment, please contact TECHKO prior to sending your unit back.

Fig. G Fig. H Fig. J

2. Method 2: Take out the Jamming Handle (Fig. G) and unfold it (Fig. H ),

then insert it into the Jam Reverse Hole and turn the Jamming Handle

counterclockwise (Fig. J) to reverse the paper out. Then remove the

paper and put the Jamming Handle back to its original position.

Note: Turn off and unplug the unit before above operation. It is suggested

to remember the folded quantity shown in the 4-digit LED Sheet Counter

Display before preforming the above 2 methods.

Overheat

LF293

Power

Fig. C

Fig. D

Fig. E

Fig. F

3) The infrared sensor inside the manual feed slot will detect the

paper(s) (this may take a few seconds) and

pull the paper(s) into the unit.

3. The folded paper(s) will come out from the

exit, then fall into the metal basket.

4. Remove the folded paper(s) from the metal

basket.

5. During folding, the 4 digit LED sheet counter

display will show the number of folded sheets.

The data can be cleared by pushing the

“RESET” switch. (Fig. C)

6. The unit may automatically stop folding and

the Overheat LED will illuminate. If the

unit overheats, let it cool down. After the

unit cools down, the Overheat LED will turn

off and the unit is ready to work. ( Fig. D)

7. To change the unit’s folding style,

please see the Paper Folding Chart:

1) Find the paper size and folding style that you want.

2) Refer to the Paper Folding Chart for the relative setting method.

3) Loosen the knobs of the 1st and 2nd Folding Guides and adjust them

as the Paper Folding Chart indicates.

4) Then tighten the knobs.

(ie) If you want to fold A4 paper to a “Z” folding style, then loosen the

1st Folding Guide’s knobs and set the panel to “N” position. Also

loosen the 2nd Folding Guide’s knobs and set the panel to the “K”

position. Then tighten the knobs and put these two Folding Guides

back to their position. The unit will fold A4 papers as “Z”style. (Fig. E)

If the paper jams:

If paper becomes jammed, you can fix with either or both of the below

methods:

1. Method 1: Open the Jamming Release cover, and remove the jammed

paper, then close the Jamming Release cover. (Fig. F)

8. If you want to slow down or speed up the folding speed, just rotate the

Speed Adjuster to achieve the desired speed.

2nd Folding Guide

1st Folding Guide

Fig. 1 Fig. 2

Fig. A

Fig. 3

Fig. B

Features:

1. Loading capacity: Paper loading tray holds up to 100 sheets of

20 Lb. bond (75 G/M2) paper.

2. Folding speed: 60 sheets of 20 Lb. bond (75 G/M2) paper per minute.

3. Manual feed capacity: Max. 3 sheets at a time.

4. Folding styles: 4 popular folding styles.

5. LED light: Power/Overheat LED light.

6. 4 digit LED Sheet Counter Display and Speed Adjuster.

7. Power:100-240v/50-60Hz AC adapter.

surface and place the folder on top of it.

2. Insert the folding guides:

- Step 1) The long guide (1st Folding Guide) is inserted in the front

of the machine. It’s placement is indicated on the inner sides of the

front of the folder. The guide must be inserted so that the "C" shape

ends fit firmly onto the silver cylinders. (Fig. 1)

- Step 2) The smaller guide (2nd Folding Guide) is inserted in the back

of the unit. The guide must be inserted so that the "C" shape ends fit

firmly onto the silver cylinders. (Fig. 2)

Operation:

1. Auto Feed:

1) Maximum100 sheets loaded at a time (20 lb. Bond / 75 G/M2).

Automatically feeds 1 sheet at a time.

2) Line up stack of papers well, and push the papers into the Paper Loading

Tray Slot. When pushing the papers, push down the loading panel to

easily push papers into position. Then release the loading panel. (Fig. A)

3) The infrared sensor inside the auto feed slot will detect the papers (this

may take a few seconds) and pull the papers into the unit one after

another automatically.

2. Manual Feed:

1) Maximum 3 sheets at a time (20 lb. Bond / 75 G/M2).

2) Line up the paper(s) (if 2 or 3 sheets) into the manual feed slot and

release paper(s) to fall freely into the slot. ( Fig. B)

3. Open the paper loading tray and pull out its small tray.

4. Put the metal basket on the table/platform and put the unit on the

metal basket firmly. Then pull out the

metal paper catch. (Fig. 3)

5. Connect the AC adapter with the unit.

Then plug the AC adapter to the power

source and put the master control

switch in the “ON”position. The green

power LED light will illuminate and the

unit is now ready to be used.

IMPORTANT SAFETY

INSTRUCTIONS

CAUTIONS

Your safety as well as the safety of others is important

to TECHKO. In this manual as well as on the product

are very important safety instructions. PLEASE READ

ALL SAFETY INSTRUCTIONS BEFORE OPERATING.

Fig. 1 Fig. 2

Fig. A

Fig. 3

Fig. B

Features:

1. Loading capacity: Paper loading tray holds up to 100 sheets of

20 Lb. bond (75 G/M2) paper.

2. Folding speed: 60 sheets of 20 Lb. bond (75 G/M2) paper per minute.

3. Manual feed capacity: Max. 3 sheets at a time.

4. Folding styles: 4 popular folding styles.

5. LED light: Power/Overheat LED light.

6. 4 digit LED Sheet Counter Display and Speed Adjuster.

7. Power:100-240v/50-60Hz AC adapter.

surface and place the folder on top of it.

2. Insert the folding guides:

- Step 1) The long guide (1st Folding Guide) is inserted in the front

of the machine. It’s placement is indicated on the inner sides of the

front of the folder. The guide must be inserted so that the "C" shape

ends fit firmly onto the silver cylinders. (Fig. 1)

- Step 2) The smaller guide (2nd Folding Guide) is inserted in the back

of the unit. The guide must be inserted so that the "C" shape ends fit

firmly onto the silver cylinders. (Fig. 2)

Operation:

1. Auto Feed:

1) Maximum100 sheets loaded at a time (20 lb. Bond / 75 G/M2).

Automatically feeds 1 sheet at a time.

2) Line up stack of papers well, and push the papers into the Paper Loading

Tray Slot. When pushing the papers, push down the loading panel to

easily push papers into position. Then release the loading panel. (Fig. A)

3) The infrared sensor inside the auto feed slot will detect the papers (this

may take a few seconds) and pull the papers into the unit one after

another automatically.

2. Manual Feed:

1) Maximum 3 sheets at a time (20 lb. Bond / 75 G/M2).

2) Line up the paper(s) (if 2 or 3 sheets) into the manual feed slot and

release paper(s) to fall freely into the slot. ( Fig. B)

3. Open the paper loading tray and pull out its small tray.

4. Put the metal basket on the table/platform and put the unit on the

metal basket firmly. Then pull out the

metal paper catch. (Fig. 3)

5. Connect the AC adapter with the unit.

Then plug the AC adapter to the power

source and put the master control

switch in the “ON”position. The green

power LED light will illuminate and the

unit is now ready to be used.

IMPORTANT SAFETY

INSTRUCTIONS

CAUTIONS

Your safety as well as the safety of others is important

to TECHKO. In this manual as well as on the product

are very important safety instructions. PLEASE READ

ALL SAFETY INSTRUCTIONS BEFORE OPERATING.

Do not use solvents, cleaning degreasers,

or any chemicals to clean the letter folding

machine.

Product is not intended for use by children.

(product is not a toy) Keep children and pets

away from letter folding machine.

Avoid touching the paper feeding slot

with hands. Never insert hands or fingers

into the paper feeding slot.

Avoid hair touching the paper feeding

slot . Keep hair/face away from the

paper feeding slot.

Avoid clothing touching the paper feeding

slot. Keep personal and loose objects

(jewelry, ties, etc.) away from paper

feeding slot.

NO HAIR

Keep aerosol products away from letter

folding machine. Do not use flammable,

petroleum-based or aerosol cleaners on

or near this product. Some agents may

combust causing serious injury.

NO TIE

Fig. 1 Fig. 2

Fig. A

Fig. 3

Fig. B

Features:

1. Loading capacity: Paper loading tray holds up to 100 sheets of

20 Lb. bond (75 G/M2) paper.

2. Folding speed: 60 sheets of 20 Lb. bond (75 G/M2) paper per minute.

3. Manual feed capacity: Max. 3 sheets at a time.

4. Folding styles: 4 popular folding styles.

5. LED light: Power/Overheat LED light.

6. 4 digit LED Sheet Counter Display and Speed Adjuster.

7. Power:100-240v/50-60Hz AC adapter.

surface and place the folder on top of it.

2. Insert the folding guides:

- Step 1) The long guide (1st Folding Guide) is inserted in the front

of the machine. It’s placement is indicated on the inner sides of the

front of the folder. The guide must be inserted so that the "C" shape

ends fit firmly onto the silver cylinders. (Fig. 1)

- Step 2) The smaller guide (2nd Folding Guide) is inserted in the back

of the unit. The guide must be inserted so that the "C" shape ends fit

firmly onto the silver cylinders. (Fig. 2)

Operation:

1. Auto Feed:

1) Maximum100 sheets loaded at a time (20 lb. Bond / 75 G/M2).

Automatically feeds 1 sheet at a time.

2) Line up stack of papers well, and push the papers into the Paper Loading

Tray Slot. When pushing the papers, push down the loading panel to

easily push papers into position. Then release the loading panel. (Fig. A)

3) The infrared sensor inside the auto feed slot will detect the papers (this

may take a few seconds) and pull the papers into the unit one after

another automatically.

2. Manual Feed:

1) Maximum 3 sheets at a time (20 lb. Bond / 75 G/M2).

2) Line up the paper(s) (if 2 or 3 sheets) into the manual feed slot and

release paper(s) to fall freely into the slot. ( Fig. B)

3. Open the paper loading tray and pull out its small tray.

4. Put the metal basket on the table/platform and put the unit on the

metal basket firmly. Then pull out the

metal paper catch. (Fig. 3)

5. Connect the AC adapter with the unit.

Then plug the AC adapter to the power

source and put the master control

switch in the “ON”position. The green

power LED light will illuminate and the

unit is now ready to be used.

IMPORTANT SAFETY

INSTRUCTIONS

CAUTIONS

Your safety as well as the safety of others is important

to TECHKO. In this manual as well as on the product

are very important safety instructions. PLEASE READ

ALL SAFETY INSTRUCTIONS BEFORE OPERATING.

Do not use solvents, cleaning degreasers,

or any chemicals to clean the letter folding

machine.

Product is not intended for use by children.

(product is not a toy) Keep children and pets

away from letter folding machine.

Avoid touching the paper feeding slot

with hands. Never insert hands or fingers

into the paper feeding slot.

Avoid hair touching the paper feeding

slot . Keep hair/face away from the

paper feeding slot.

Avoid clothing touching the paper feeding

slot. Keep personal and loose objects

(jewelry, ties, etc.) away from paper

feeding slot.

NO HAIR

Keep aerosol products away from letter

folding machine. Do not use flammable,

petroleum-based or aerosol cleaners on

or near this product. Some agents may

combust causing serious injury.

NO TIE

NO AEROSOL

NO CHILD

MAX. 3 SHEETS

Operate this letter folding machine with

an 8-15 minutes on, and a 20-30 minutes

off cycle.

In order to prevent accidents, always

unplug the unit and make sure the Master

Control Switch is in the OFF position while

not in use.

Do not operate the unit with a damaged

power supply cord.

Don’t overload manual feed paper folder :

Load a maximum of 3 sheets at a time.

1. Your safety as well as the safety of others is important to TECHKO.

In this manual as well as on the product are important safety

instructions. Please read and retain these instructions.

2. Read all instructions before use. Save these instructions for later use.

3. Follow all warnings and instructions marked on the product.

4. Unplug this product from the wall outlet before cleaning. If needed, the

housing can be cleaned with a cloth, dampened with a mild soap and

water solution.

5. Folder should never be placed near or over a radiator, heat register or

water.

6. Do not rest anything on the power cord. Do not place machine where

people may walk on the cord.

7. If an extension cord is used, make sure that the total ampere ratings of

the products plugged into the extension cord do not exceed the extension

cord’s ampere rating and/or does not exceed 15 amperes.

8. Do not alter the unit or power cord in any way. Do not operate the unit if

it or the power cord appears damaged in any way.

9. Do not service this product yourself. Opening/removing covers may

expose you to dangerous voltage points or other risks, and will void

manufacturer's warranty. Unplug product from outlet and refer servicing

to qualified service personnel.

10. Keep out of reach of children and pets.

11. This folder should be operated only with an operator in attendance.

12. BE SURE THE ON/OFF MASTER CONTROL SWITCH (AT THE BACK

OF THE UNIT) IS IN THE "OFF" POSITION BEFORE PLUGGING IN

THE FOLDER.

Safety Instructions

Speed Adjuster

Jamming Reverse

Hole

Jamming Handle

Small Tray

Paper Loading

Tray

Knobs

Jamming Release Cover

Metal Basket

Metal Paper Catch

2nd Folding Guide

Overheat

Power

Manual Feed

Slot

4-digit LED Sheet

Counter Display

1st Folding Guide

Panel - 1

ON/OFF Master

Control Switch

2nd Folding Guide

Reset Switch

Loading Panel

Installation:

1. Carefully unpack the machine and inspect all contents for any possible

damage due to shipping. Place the metal basket on a flat, level work

MODEL:LF293

Overheat

Power

MODEL:LF293

Autres manuels Techko Plieuse

Techko

Techko LF291 Manuel utilisateur

Manuels Plieuse populaires d'autres marques

Mathias Bauerle

Mathias Bauerle Multipli 35 Manuel utilisateur

Intelli-Fold

Intelli-Fold DF-304C Manuel utilisateur

Pitney Bowes

Pitney Bowes DI425 FastPac Manuel

Hwasung

Hwasung COMPODIS HMK-830 Series Manuel utilisateur

KRUG+PRIESTER

KRUG+PRIESTER IDEAL 8306 Manuel utilisateur

XPOtool

XPOtool 61574 Manuel utilisateur

MBM

MBM 306A Manuel utilisateur

Formax

Formax FD 342 Manuel utilisateur

Formax

Formax FD 332 Manuel utilisateur

MBM

MBM FO0601 Manuel utilisateur

IMS

IMS FPi4000 Manuel utilisateur

Nagel

Nagel Foldnak 80 Manuel utilisateur

MBM

MBM S 352 Manuel utilisateur

Count

Count KF-250 Manuel utilisateur

Formax

Formax AutoSeal FD 1500 Plus Manuel utilisateur

Opus

Opus multiCREASE 52 Manuel utilisateur

KRUG+PRIESTER

KRUG+PRIESTER IDEAL 8306 Manuel utilisateur

Martin Yale

Martin Yale 1217a Manuel utilisateur