Teac TD-35 Manuel utilisateur

Digital Strain Indicator

ＴＤ−３５

Operation Manual

Teac Corporation

Ver 2006/ 4/18

P/N D009185‑00C

Preface

Thank you for purchasing a TD‑35 Digital Strain Indicator.

Read this manual and understand the contents correctly before using the product

for the best performance of the TD‑35.

Warranty

This is a product that has passed a strict in‑house quality inspection. We will

repair or exchange it upon any failure or trouble of this product according to

the service standard prescribed by TEAC Corporation. This TEAC warrantee shall

also fully comply with any local product liability law.

Teac Corporation

Headquarter Sales Department:

3‑7‑3, Nakacho Musashino‑shi, Tokyo 180‑8550 Japan TEL: (0422) 52‑5082

Contacts for Technical Support

Business Solutions Company Sales Department Sales 1 Group

TEL (0422) 52‑5074 E‑mail：ticcs@tic.teac.co.jp

Hours Mon〜Fri (except Holidays) AM 9:30〜12:00、PM 1:00〜5:00

TEAC Corporation Web Page http://www.tic.teac.co.jp/

Index

1. Overview...................................................................................... 4

2. Features ...................................................................................... 4

3. Configuration.............................................................................. 4

4. Standard Accessories.................................................................. 6

5. Specifications .............................................................................. 6

6. Operation..................................................................................... 8

7. Measuring Method.................................................................... 12

8. Miscellaneous Materials........................................................... 15

9. External View ........................................................................... 18

1. Overview

The TD‑35 is a digital strain indicator that suits various strain gauge base

sensors, used for the indication of pressure, load or torque as well as the

load‑cell. This offers the display resolution of ±20000×10‑6 strain. In

addition to the display in strain unit, it is also capable of converting the value

into a real unit such as in Newton (N) using the preset sensor‑output‑value (mV/V)

for direct reading convenience. This operates with a built‑in battery (AAA type)

or external AC power supply (using an AC adaptor).

2. Features

1) Small and compact size.

2) All necessary functions for the static strain indicator are equipped and

ready to make a measurement simply by connecting the sensor.

3) Suited for almost all types of strain gauge base sensors such as load and

pressure.

3. Configuration

1) Pre‑amp 6) Bridge power supply

2) A/D converter 7) Operation controller

3) Display circuit 8) Internal battery

4) Ref. power circuit 9) AC adapter

5) CPU 10) Power circuit

4. Standard Accessories

1) ZR6(Y) Oxyride dry‑cell battery ・・・・・・・・・・・・・・・・ Qty 4

2) Operation Manual ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ Qty 1

3) AC Adapter ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ Qty 1

5. Specifications

Input : Strain gauge type connector

Input connector : NDI‑7R connector

Bridge power supply : Approx. DC 2.5V, Max current 30mA

Input range : ±20000×10−６ strain（±10mV/V）

Zero shift : ±10000×10−６ strain, digital adjustment

Display : Strain display mode : 0±20000×10−６ strain

User display mode : 020000×10−６ strain value

can be converted to an arbitrary user value

within 099999 (with arbitrary decimal point)

Display module : LCD, Character height approx. 12mm,

Display frequency : Approx. 6 times/second

Peak hold : Maximum value during measurement

Calibration accuracy : 0.1％ F.S or less (FS = 20000×10−６ strain)

Linearity :

±1×10−６ strain ＋1digit

Stability Zero : ±0.2×10−６ strain/℃

Stability Sensitivity : ±0.1×10−６ strain/℃

Low battery voltage warning : LCD shows B under approx. 4V

Operating condition

Temperature range : 0〜45℃

Humidity range : Max. 80% RH (without condensation)

Storage temperature range : ‑40〜80℃

Power supply (Internal) : ZR6(Y9) dry battery

(Externnal) :

DC5〜8V AC adapter

(Current consumption) : Approx. 170mA/DC6V (when sensor=120Ω,

Back‑light=OFF)

Battery life : Approx. 8 hours (when ZR6(Y) Oxiride dry‑cell

battery, sensor=120Ω, Back‑light=OFF, at

room temperature)

Dimension : 150mm(W)x100mm(D)x40mm(H) (excluding umbo)

Weight : Approx. 500g (including ZR6(Y) dry‑cell battery)

6. Operation

6.1 Functions and controls in rear panel

① DC IN ‑ External Power Input Connector

The power input connector when AC power is used.

Use the supplied accessory AC adapter for the external power.

② POWER ‑ Power Switch

The power switch for the internal battery or the external power.

When the external power is connected, the internal battery is used and not

consumed.

③ LIGHT ‐ Back‑light Switch for LCD

The ON/OFF switch for the display back‑light. Note that twice as much power

is consumed when it is turned on in battery operation.

④ INDICATION ‐ Display Unit Switch

The switch to select whether the strain input is displayed in strain unit

(STRAIN) or the mV/V input is displayed in user defined unit (USER).

When STRAIN is selected, it displays in strain quantity (x10−６ strain),

and when USER is selected, it displays in user defined quantity.

⑤ ZERO ‐ Zero Cancel ON/OFF Switch

The ON/OFF switch of the zero cancel operation.

When it is ON, the zero cancellation is performed by pressing and holding ⑬

"SELECT" on the operation panel and press ⑨↓"ZERO‑RESET".

When it is OFF, the zero cancel operation is not performed and it displays

the strain quantity with reference to the TD‑35 internal zero in the selected

display mode set in ④. This can be used to check the initial balance value

of the strain gauge or strain gauge sensor.

⑥ INPUT ‐ Sensor Input Connector

The NDIS standard input connector for the strain gauge sensor. Applicable plug

model is PRC03‑12A10‑7M10.5 made by Tajimi‑Musen.

Pin Signal (Cable Color)

Ａ Bridge Voltage ＋ (Red)

Ｂ Bridge Output − (Black)

Ｃ Bridge Voltage − (Blue)

Ｄ Bridge Output ＋ (White)

Ｅ Shield (Yellow)

Ｆ No Connection

Ｇ No Connection

(Color in parentheses is of our companys color)

Strain gauge sensor connecting diagram

6.2 Operating Function and Controls

⑦ ↑ Key

Used to increase the setting value

⑧ → Key

Used to move the digit during setting value

⑨ ↓ Key (ZERO‑RESET)

Used to decrement the setting value or zero cancellation when used together

with ⑬ key.

⑩ ← Key

Used to move the digit while setting value

⑪ ENTER Key

Used to set the value in various settings

⑫ PEAK HOLD Key

Used to select the peak hold operation

It holds and displays the maximum value of the A/D sampling data. During

the peak hold operation, [P] is displayed in the LCD. When [P] is displayed,

press this key again and [P] disappears indicating that the peak hold mode

is canceled, the display mode returns to normal.

Table des matières

Autres manuels Teac Instrument de mesure

Teac

Teac TC-SR(T)-G3 Manuel utilisateur

Teac

Teac TD-9000T Manuel utilisateur

Teac

Teac TC-MFSR(T)-G Manuel utilisateur

Teac

Teac TD-240A Manuel utilisateur

Teac

Teac TD-700T Manuel utilisateur

Teac

Teac TD-01 Portable Manuel utilisateur

Teac

Teac TD-275T Manuel utilisateur

Teac

Teac TD-280T Manuel utilisateur

Teac

Teac TD-9000T Manuel utilisateur

Teac

Teac TU-GR-G Manuel utilisateur

Teac

Teac TU-NR-C-G Manuel utilisateur

Teac

Teac LX Series Manuel utilisateur

Teac

Teac HD-P2 Manuel utilisateur

Teac

Teac TD-9000T Manuel utilisateur

Teac

Teac TC-FR(T)-G6 Manuel utilisateur

Teac

Teac TT-FR(T)-G6 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur